Awesome upgrade! I was keeping up with you upgrading my TT but it looks like you're ascending to another level. Keep up the good work, I love using these videos as an excellent resource tool for when I'm working on mine.
Wise idea to do manifold at same time as PCV! I remember a nightmare of hours removing the old PCV breather pipe and even more trying to seat the new 034 part enough to get the clip on properly, ALL via dipstick area underneath manifold 🤦 after watching this I wish I'd just removed everything lol. Great video; keep em coming
Hey my man. May I make a suggestion?? Do what I did and yank out allllll that emissions crap you don’t need. Get rid of the entire PCV, N249, SAI and EVAP system. Rip it all out. The combi valve, all of it. This eliminates so much stuff / hoses that can crack and leave you screwed. 034 makes a block off plate in place of the combi valve, run resistors where you unplugged stuff, install a catch can and tune the rest out. My 02 225 loves love loves it without the 20 year old extra crap under the hood and yours will too! You’ll thank me later! Enjoy!
Exactly, when I was 1.8t I ripped ALL of the vacuum/evap lines out, you literally only need 3 vacuum lines for the 1.8t to run and especially aince he is planning on going big turbo that is all you need. I been through it and thats that.
That was a big job! Two things for you: #1 - Learn some new swear words for when you run into the oddities you experience from time to time on these old engines. #2 - Clean the damn thumb prints off that beautiful new intake for Lord's sake! Actually, it is an impressive job you are doing with both of these cars. Keep it up as you are inspiring a lot of folks.
Little tip bud get a blower nozzle for your air hose and blow the engine bay out before you start next time. Saves a bunch of cleaning time. Awesome video dude keep rocking🤘
Damn nice I was looking for a manifold for my 180, I want to get a fmic but hate how the 180 piping is ran. I did a silacone pcv upgrade and my pcv hose was completely in half missing about 2 inches of hose haha
Dang that sounds like a really messy pcv job haha. It sounds like every one fails catastrophically. Also a manifold like this could definitely help you re-route the IC piping. You could mimic a 225 routing pretty easily I bet. Thank you for the support!
@@HunterDirection yeah that's what u was planning on doing, but this one here would alow me to put it on 180 style and then switch when I get the fmic. But yeah waiting for you to wrap the TT, I'm in the process of sanding, priming and making the some new bumpers off a 3.2 I found in a yard close to me surprisingly. I got the spoiler but not sure if ima put it on yet haha, it's cool but I do like carbon fiber 😅
Great video!! I am curious how the dip stick tube is retained with the removal of the original plate that captures it. Thanks again for sharing. Awesome job!
It looks so funny with the stock throttle body 😅. Without the larger (hemi) throttle body, I doubt there is much, if any, benefit to this with anything less than a GT30. The stock intake manifold is already really efficient. The problem with it is that the throttle body mounts on the side in transverse motors. If it were possible, the longitudinal intake manifold would yield better results overall. You need to ditch the PCV suction jet system all together and grab yourself a catch can that vents to atmosphere. You won't nessisarily notice a difference in performance, but it is a must-have. I have IE mk4 gti/jetta can. It's overpriced, but I'm very happy with the product.
Bro yea the pcv system is vital for all 1.8t engines. I think vw Audi group should have made it clear somehow that this piece is so importantl to change before 100k miles. Ideally 80k miles. I just did mine the other day, and was in the same condition as yours.. Also as a tip, if you need a hose going from the pcv into the manifold, I'm pretty sure it is a 10mm vacuum line. You might want to check your evap purge valve too, they can go bad over time.
I have a few videos where I talk about it actually. My "end of 2022" video is probably the most recent. I review my goals from the previous year and set ones for the current year for both cars.
Hi guys Iv got seat Leon mk1 bam engine Iv got some issue it’s only 98k miles on the engine and it’s Smokey when the car warms up then it’s starts to smoke 💨 smells of oil
Looking forward to seeing more of this! Its always a good feeling cleaning these engine bays up. Do you plan on going to any major meets, cruises, or anything of the sort? I should be getting my TT sorted soon and Im also in the PNW - so maybe we'll run into each other!
I completely agree! Awesome to hear you're also in the PNW. Believe it or not but I've never really been to an official meet or cruise. Sounds like fun though so I'm sure I'll go at some point. Syncing up would be fun!
Hey hunter I have a question about the turbo inlet pipe on the s4 b5. Mine passenger side pipe for the turbo is coming lose, I can tell because of how much tighter the driver side one is, do you know if that could be what’s causing my car to be in limp mode, I’ve done spark plugs twice and done the oil change ever since I bought the car, but it seems like it was running better when I drove it for the first time after it was sitting for a year. My car wasn’t in limp mode when I got it, so what’s causing it for it to be in limp now? I have no throttle body boot leaks or lobster claw leaks. Things I haven’t checked off are pcv system, or maf, my car is very hesitant on full throttle in higher gears between 3k-5k rpm. I’m not sure why, if I’ve fixed a lot of issues I found, one of my coil springs being missing. Which I fixed when I done the plugs, so at this point I’m just losing my mind trying to figure out this problem. I would appreciate it so much if you gave me your opinion on what the problem could be! Thank you so much bro.
A shop vac would of helped so much with safely retracting all the debris from the injectors the manifold and the oil filter housing. Nothing can go down to the oil since the gasket has vents so it acts like a cage, but you would be introducing all the debris to your turbo and intake. Cheers
![[Full] 4 ต่อ 4 Celebrity EP.910 | 22 ก.ย. 67 | one31](http://i.ytimg.com/vi/4TR3MVpOiw8/mqdefault.jpg)
Awesome upgrade! I was keeping up with you upgrading my TT but it looks like you're ascending to another level. Keep up the good work, I love using these videos as an excellent resource tool for when I'm working on mine.
I am glad to hear you have found the videos useful! Thank you a ton for the support!
great narration skill great mechanical skill just pure greatness
I am happy to hear you like the content! Thank you for the support!
Wise idea to do manifold at same time as PCV! I remember a nightmare of hours removing the old PCV breather pipe and even more trying to seat the new 034 part enough to get the clip on properly, ALL via dipstick area underneath manifold 🤦 after watching this I wish I'd just removed everything lol. Great video; keep em coming
Hey my man. May I make a suggestion?? Do what I did and yank out allllll that emissions crap you don’t need. Get rid of the entire PCV, N249, SAI and EVAP system. Rip it all out. The combi valve, all of it. This eliminates so much stuff / hoses that can crack and leave you screwed. 034 makes a block off plate in place of the combi valve, run resistors where you unplugged stuff, install a catch can and tune the rest out. My 02 225 loves love loves it without the 20 year old extra crap under the hood and yours will too! You’ll thank me later! Enjoy!
Exactly, when I was 1.8t I ripped ALL of the vacuum/evap lines out, you literally only need 3 vacuum lines for the 1.8t to run and especially aince he is planning on going big turbo that is all you need. I been through it and thats that.
Seconded, please just get rid of all that crap already!
Yo Hunter! Great video my guy! The TT is looking better and better and that manifold makes the engine bay look so good. Cheers!!
I am stoked you enjoyed the video! I also really love the look of the new manifold. Thank you a ton for the support!
That was a big job! Two things for you: #1 - Learn some new swear words for when you run into the oddities you experience from time to time on these old engines. #2 - Clean the damn thumb prints off that beautiful new intake for Lord's sake! Actually, it is an impressive job you are doing with both of these cars. Keep it up as you are inspiring a lot of folks.
Ha ha ! Agree about the finger prints on this awesome piece. Anyway, great job as usual Hunter !
watching you build the car make motivated to buy my own one and work on it
thank you
I am excited to hear you have found motivation in the videos. Thank you for the support!
Had exact same problem with the PCV on my MK1 Quattro. Replaced the whole ecosystem with 034
Yeah the 034 parts are fantastic! Thank you for the support!
Thank you . . . again.
Little tip bud get a blower nozzle for your air hose and blow the engine bay out before you start next time. Saves a bunch of cleaning time. Awesome video dude keep rocking🤘
Damn nice I was looking for a manifold for my 180, I want to get a fmic but hate how the 180 piping is ran. I did a silacone pcv upgrade and my pcv hose was completely in half missing about 2 inches of hose haha
Dang that sounds like a really messy pcv job haha. It sounds like every one fails catastrophically. Also a manifold like this could definitely help you re-route the IC piping. You could mimic a 225 routing pretty easily I bet. Thank you for the support!
@@HunterDirection yeah that's what u was planning on doing, but this one here would alow me to put it on 180 style and then switch when I get the fmic. But yeah waiting for you to wrap the TT, I'm in the process of sanding, priming and making the some new bumpers off a 3.2 I found in a yard close to me surprisingly. I got the spoiler but not sure if ima put it on yet haha, it's cool but I do like carbon fiber 😅
That's about where I'm at right now with my 02 awp project. I will be looking closer into how that will benefit future ambitions with the car.
@@nealraudabaugh7922 yeah mines a awp 02 as well. I'm getting the 180 fmic and just change the piping later.
Great video!! I am curious how the dip stick tube is retained with the removal of the original plate that captures it. Thanks again for sharing. Awesome job!
Awesome video!
Love the 1.8t
I am glad you liked it! It's a great engine for sure
It looks so funny with the stock throttle body 😅. Without the larger (hemi) throttle body, I doubt there is much, if any, benefit to this with anything less than a GT30. The stock intake manifold is already really efficient. The problem with it is that the throttle body mounts on the side in transverse motors. If it were possible, the longitudinal intake manifold would yield better results overall. You need to ditch the PCV suction jet system all together and grab yourself a catch can that vents to atmosphere. You won't nessisarily notice a difference in performance, but it is a must-have. I have IE mk4 gti/jetta can. It's overpriced, but I'm very happy with the product.
Bro yea the pcv system is vital for all 1.8t engines. I think vw Audi group should have made it clear somehow that this piece is so importantl to change before 100k miles. Ideally 80k miles. I just did mine the other day, and was in the same condition as yours.. Also as a tip, if you need a hose going from the pcv into the manifold, I'm pretty sure it is a 10mm vacuum line. You might want to check your evap purge valve too, they can go bad over time.
Will you be changing the rubber hose connected to the intake manifold to a silicone hose?
Looks awesome!!!
Thank you so much!
Where to get the Universal Vacuum Tubes? The VR6 bearly has any, but still
Excellent. Do you have a video talking about your upgrade plan?
I have a few videos where I talk about it actually. My "end of 2022" video is probably the most recent. I review my goals from the previous year and set ones for the current year for both cars.
Hi , I'm from Spain I would like to know what is the reference of the injector inserts of your intake manifold 034 i need help, thank you!
Do you have the part number of the hose elbow from intercooler to throttle body?
What hose kit did you buy/use for the intercooler to throttle body?
lol yeah this video hit home for me i went through the same thing on my old BEA 225 it was pain haha.
Do i have to tune the car if i put bigger injectors? like the bosch 550cc, i have the 180 version
Standard 1.8T problems, almost everyone looks like that 😊
I am glad to hear I'm not alone. Thank you for the support!
Hi guys Iv got seat Leon mk1 bam engine Iv got some issue it’s only 98k miles on the engine and it’s Smokey when the car warms up then it’s starts to smoke 💨 smells of oil
That’s why they call it the crack pipe 😂
Looking forward to seeing more of this! Its always a good feeling cleaning these engine bays up.
Do you plan on going to any major meets, cruises, or anything of the sort? I should be getting my TT sorted soon and Im also in the PNW - so maybe we'll run into each other!
I completely agree! Awesome to hear you're also in the PNW. Believe it or not but I've never really been to an official meet or cruise. Sounds like fun though so I'm sure I'll go at some point. Syncing up would be fun!
I WANNA SEE YOU SEND THE BATTRE TO THE BACK OF THE CAR
A battery relocation could definitely be interesting. It would clean up the bay quite a bit. Thank you for the support!
Love the work
the PCV takes filtered oil? what??
What code is on your head? I am thinking BEA?
Mine is an AMU. It's a 2002 and I don't think it's been swapped by anyone before.
@@HunterDirection indeed. im 225 bea. your videos are great dude, i appreciate your work
Very nice inlet but for now it's useless. Stock inlet can handle 500+hp.
Hey hunter I have a question about the turbo inlet pipe on the s4 b5. Mine passenger side pipe for the turbo is coming lose, I can tell because of how much tighter the driver side one is, do you know if that could be what’s causing my car to be in limp mode, I’ve done spark plugs twice and done the oil change ever since I bought the car, but it seems like it was running better when I drove it for the first time after it was sitting for a year. My car wasn’t in limp mode when I got it, so what’s causing it for it to be in limp now? I have no throttle body boot leaks or lobster claw leaks. Things I haven’t checked off are pcv system, or maf, my car is very hesitant on full throttle in higher gears between 3k-5k rpm. I’m not sure why, if I’ve fixed a lot of issues I found, one of my coil springs being missing. Which I fixed when I done the plugs, so at this point I’m just losing my mind trying to figure out this problem. I would appreciate it so much if you gave me your opinion on what the problem could be! Thank you so much bro.
Keep up with the amazing content, we wouldn’t know a lot of these things without you man!
Great job 😊
A shop vac would of helped so much with safely retracting all the debris from the injectors the manifold and the oil filter housing. Nothing can go down to the oil since the gasket has vents so it acts like a cage, but you would be introducing all the debris to your turbo and intake. Cheers