See specification on following link : www.ebay.in/itm/2-Pieces-Car-Auto-Fan-DC-12V-Volt-Motor-DC-Fan-Propeller-5-inches-Solar-Fan-/141783695278?hash=item2102f77fae
Hey guys my friends and I are trying to build a robotics club in Pakistan where there is almost no exposure to robotics for kids. We would really appreciate your help as we live in an economically depressed area Please visit this website and donate as fellow robot enthusiast. igg.me/at/MH8g-bWWUe0
I love ur video.. because u used very usual and not so costly material for cutting , drilling so that any person can afford it .. that's make a very nice video
Wow this video seriously made me re evaluate the life that i am living... literally the old worn out saying of you can do anything that you put your mind to is absolutely real. there are multi billion dollar companies making a killing off of this stuff right now... all created from a act of god... the make up of all of these ideas comes straight from the earth.. medals... and energy... Positive and negative electrons creating motion.... absolutely amazing... My lil man is only two right now, i cannot wait to teach him all of these things...
Water conducts, so it depends on the type of coil too. Pure copper = no go. Get some electronic waterproofing shit (don't recall the name of the kind I usually use, but it's awesome and works for these motors), and put it all over.
I would separate motor from pump. With a piece of plastic pipe, for example. So, you could keep it outside the water. Mechanical transmission from motor to pump can be made with a narrow pen tank. I did it, in fact. It works! I've also made rubber seals for the pump case.
hello there mr.navin,i wanna know if the water has a tendency to go inside the front shaft bearing of of that brush motor?cause making pump is easy but the efficiency of it for lack of material will bring power lost to its performance.
Navin I think you should show us the different method of waterproofing the motor, by submerging the motor in to water is the best idea as the motor might not overheat for long time...
Brushed dc motors work perfectly when submerged in water. A small amount of electrolysis can occur if the water has any kind of salt in it, but it will not be enough for a short circuit. Your motors connections will get crusted over time, that's all.
+ted clubber lang yes on motor outer casing,but what Erkut is saying is that he did not make it waterproof...water can and will get inside over time but only damage will be on connections/brushes. i try it on my boat when i was a kid(stereo players DC motor),works fine few days than start to struggle a lot and than stops dead,iron core start to rust cause water is getting in around shaft.good for emergency,but not a long term solution.
Update: Just take another tube and attach it to other side of motor. now first tube will suck water from source and second will exhaust it! and that will also prevent your motor get wet. Pretty simple . i dont know why some user comment/complaint about it. its just a fun project for kids.
Hi, nice video, im gonna try it. Therefore, i already read that if the motor has any holes, i should use glue on them, but what about the surface itself? Wont the motor get oxided overtime by the water? and therefore, stop working after time?
sir can i use this procedure for getting water from our well with out using pulleys...is this equipment has the capacity to draw the water from a well near our homes by using this equipment connected to a electricity..without batteries
You'd need a much larger motor for this, but the procedure could still work. I'd recommend not submerging the motor though, as it will degrade over time.
Putting a motor in the water like that will cause the iron core in the rotor and the magnets and possibly the case as well to rust quickly, seen this with other small pumps i ve had where water leaked inside the motor and after a while it seized.
ok how many people who doubted this project and whined and still click his next video? ok even it might be simple and we have questions we still like these little experiments...
you are showing to cut a deodorizer or whatever it is that has pressure in it. If someone doesnt know much and cuts a new can (which has a lot of pressure) it could cause an accident!
+Jared Flaba See specification on following link : www.ebay.in/itm/2-Pieces-Car-Auto-Fan-DC-12V-Volt-Motor-DC-Fan-Propeller-5-inches-Solar-Fan-/141783695278?hash=item2102f77fae
See specification on following link : www.ebay.in/itm/2-Pieces-Car-Auto-Fan-DC-12V-Volt-Motor-DC-Fan-Propeller-5-inches-Solar-Fan-/141783695278?hash=item2102f77fae
+Navin Khambhala file:///C:/Users/Malin/Downloads/kolio.png what is this part ?
+Malin Letiev good
+Navin Khambhala # crazyNK Bro, u can use that pump to make small fountain :). Such a great ideas, you rule.
Man you are amazing!!! How do you get these incredible ideas???
Hey guys my friends and I are trying to build a robotics club in Pakistan where there is almost no exposure to robotics for kids. We would really appreciate your help as we live in an economically depressed area Please visit this website and donate as fellow robot enthusiast.
igg.me/at/MH8g-bWWUe0
I love ur video.. because u used very usual and not so costly material for cutting , drilling so that any person can afford it .. that's make a very nice video
You don't have to worry about leaking; no need seal... Nothing..!!!..great idea... thanks
Ye video merko bot achi lagi. Maine bhi try keeya or bna leeya ye water pump. Ab mai cooler bhi bna rha hu.
Wow this video seriously made me re evaluate the life that i am living... literally the old worn out saying of you can do anything that you put your mind to is absolutely real. there are multi billion dollar companies making a killing off of this stuff right now... all created from a act of god... the make up of all of these ideas comes straight from the earth.. medals... and energy... Positive and negative electrons creating motion.... absolutely amazing...
My lil man is only two right now, i cannot wait to teach him all of these things...
very nice and easy we don't need much things also to do 😀😀
wow its amazing what a water proof motor
I'm very impressed by just a couple of your videos! You must be a very good teacher to your students, keep up the good work!
Khryownbiii
what a waterproof motor..
+lana lang Brushed motors don't need to be water proofed. inside is just magnets and an insulated coil of water.
Water conducts, so it depends on the type of coil too. Pure copper = no go. Get some electronic waterproofing shit (don't recall the name of the kind I usually use, but it's awesome and works for these motors), and put it all over.
lana lang all toy motor is waterproof DUM DUM LOL!!
r/woosh
r/woosh
good thanks for this creation
супер чувак! мне нравится твой канал!
I would separate motor from pump. With a piece of plastic pipe, for example. So, you could keep it outside the water. Mechanical transmission from motor to pump can be made with a narrow pen tank. I did it, in fact. It works! I've also made rubber seals for the pump case.
Too Good Navin....
navin ur the best.
Thanks for this useful video
Great Job. it is usable for fish tank.
Very good effort and thanks for sharing the knowledge. Keep posting :)
It would work as a science project for centrifugal force.
Also we'll need to seal off the exposed ends for the terminals to avoid corrosion
I remember when I made my first water pump. I was in 8-th grade. What a good memory...
No.
+Steven King Why no I had a lot of fun with it :)
+dvdvideo1234 No.
why not?
Nice
awesome ideas
keep it up Navin!!!!!!!
lol. dude you are so cool. bare minimum tools , bare feet, and making cool stuff!
Thank you Mr... It is an awesome video... Cheers !!!
hello there mr.navin,i wanna know if the water has a tendency to go inside the front shaft bearing of of that brush motor?cause making pump is easy but the efficiency of it for lack of material will bring power lost to its performance.
ive been wanting to know how to make the fan/spinning thingy for a while this helped me thanks
Navin I think you should show us the different method of waterproofing the motor,
by submerging the motor in to water is the best idea as the motor might not overheat for long time...
like ur way of making propeller
your videos are superb! and very simple strong great wow awesome
Nice. It needs a brush less motor ideally as a brushed one will break down after time but it's pretty slick workaround and DIY skills.
I like your impeller design
सुपर वीडियो पानी में मोटर डालेंगे तो बेकार हो सकती है
Brushed dc motors work perfectly when submerged in water. A small amount of electrolysis can occur if the water has any kind of salt in it, but it will not be enough for a short circuit. Your motors connections will get crusted over time, that's all.
he filled the holes in the motor with glue, mate
+ted clubber lang yes on motor outer casing,but what Erkut is saying is that he did not make it waterproof...water can and will get inside over time but only damage will be on connections/brushes.
i try it on my boat when i was a kid(stereo players DC motor),works fine few days than start to struggle a lot and than stops dead,iron core start to rust cause water is getting in around shaft.good for emergency,but not a long term solution.
you r a great person bro u just do great thing with scratch and it is very useful and creative for small kids
super amezing osm
best of some school projects for kids
VERY INTERESTING
very nice and good
good job bhai
Update:
Just take another tube and attach it to other side of motor. now first tube will suck water from source and second will exhaust it! and that will also prevent your motor get wet. Pretty simple . i dont know why some user comment/complaint about it. its just a fun project for kids.
That would work, but you'd need to prime it first in order to make the "pump" spit out the water. I'm trying to find a way around that
good effort...... i liked
Trabi aur tilavt ka mza aata he roje men saong
I like it
Kub valo hoya6ha
Its not going to kill the motor overtime as you dipped it inside the water?
This is awesome
Something to do with my little nephew over holidays, add Arduino and let the fun begin. Nice project to teach kids electronics.
electronics and water... yeah...
+Elliot Lockett Distilled water is not conductive.
Valueless Dollar I know that, but it's still corrosive.
Elliot Lockett
Its not as corrosive and wont corrode as fast. But yes.. it will still do damage overtime.
What are the specifications and brand of the motor used in this video...
Where did you get the motor
you are awesome
Great job! I subscribed. Love the fast forward parts with the sound still normal. Smart camera. Good job! S
Good job
Which motor you use in video
Good job!
Hi, nice video, im gonna try it.
Therefore, i already read that if the motor has any holes, i should use glue on them, but what about the surface itself?
Wont the motor get oxided overtime by the water? and therefore, stop working after time?
u don't need to glue up there holes. brushed motors are waterproof by them selves
amaziiiiiiiiiiiiiing
Have you used anything else for the chamber - if you don't have acess to IV drip tubing?
+ggin nj - cheap enough.....
www.amazon.com/Cotran-Disposable-Intravenous-Set/dp/B0002ZIJ7E/ref=pd_sim_121_6?ie=UTF8&dpID=31kLcXJ0ZGL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=14P565AA46QPP44KPWD7
One thing is certain, it will not overheat, and the commutator will be lubricated, eventually!
I liked it except you should explain it for kids so they know WHY it works
Navin bro great video and if it is dc motor then SOANY PE SOHAGA one can also generate electicty by pumping the water in pipe am i right ?
excelente!!!!!!!
Helal olsun reyiz Türkleri unutmamışsın
+Ne Ki Bu? derken?
+yusuf vuran sadece İngilizce ve Türkçe altyazı var
I will try this
great ... I heard a pressure cooker whistle sound ... r u making that one too sir
we get the idea but the hard part is to make last longer by making it waterproof
does the motor not get spoilt when it is completly submerged into water
+cyril joel Read the description...
Dj banks all of Kara
It continues to run until it gets corrosion due to electrolysis
GOOD VIDEO
thanks a lot
supper
Should we use some kind on water proof motor or ordinary one
Thank you sir
it is nice idea
bro navin which pipe have u used?? in this video
very nice
yahooo ! itx really wOrk
nice video
i like it video
Cool vid
Thank for tips
super..................
you' re amazing. Thank you for your clip video.
good video but can you try make a Gear Water Pump? nobody on youtube actualy do make 1 of these :D
Does it work as an air pump? Such for inflating air ballons
Muito bom!
if you pack holes of motor with glue you aren't letting it breath and long uses will make it overheat
awesome bro
wonderful.
Konsi glue use kia he
sir can i use this procedure for getting water from our well with out using pulleys...is this equipment has the capacity to draw the water from a well near our homes by using this equipment connected to a electricity..without batteries
You'd need a much larger motor for this, but the procedure could still work. I'd recommend not submerging the motor though, as it will degrade over time.
what do u use as glue
how about the motor? is it all motor are good for water? or there specific only?
+Jun Chua Its normal 12 DC Motor, if there is any hole on motor then kindly pack with it glue
+Jun Chua Dc Brushed motors are water proof by default. Insulated wire and magnets on the inside. Nothing to short out.
Navin Khambhala # crazyNK
Well, the terminals could be exposed, so that could cause electrolysis, that leading to corrosion...so Almost.
sir ye motor pani ke andar jalegi nhi kya????
kya ye motor water proof h?
Putting a motor in the water like that will cause the iron core in the rotor and the magnets and possibly the case as well to rust quickly, seen this with other small pumps i ve had where water leaked inside the motor and after a while it seized.
ossam
aap motor konsi website se letay hain ?
Ek or easy method batao pump banane ka
Mr Navin khambla which glue you used
ok how many people who doubted this project and whined and still click his next video?
ok even it might be simple and we have questions we still like these little experiments...
I mean
Centrifugal force exists, so I guess it could work
yar agr pump ko pani mn rkha jae to yh kharab ni ho jae ga .??
may i ask, how can the shaft inside the motor keeps spinning when it is inside the water but the motor in it is not wet?
Make watercooler for cpu.. Bst
good very good
sir motor me pani nahi ghuse ga kya kharab hi jonjayega motor
+Santosh Kapar if quality of motor is weak, then it may happens
you are showing to cut a deodorizer or whatever it is that has pressure in it. If someone doesnt know much and cuts a new can (which has a lot of pressure) it could cause an accident!
well only 2% people of all who watched this video, actually try making it...
That amazing! Can u tell me or preferably link me to what kind of motor that is.
+Jared Flaba See specification on following link : www.ebay.in/itm/2-Pieces-Car-Auto-Fan-DC-12V-Volt-Motor-DC-Fan-Propeller-5-inches-Solar-Fan-/141783695278?hash=item2102f77fae
dc motor from any toy
12V DC motor
Thank you