Here's another tip you'll like: Cut a sheet of 5/8" plywood to fit your pickup box between the wheel wells, and long enough to cover the full length of your bed with the tailgate up. Rectangle shaped, no cut-outs for the wheel wells. Lay it in your box on top of your nylon box liner ribs. You'll find many uses. The plywood slides on the nylon ribs (of the box liner) like roller bearings and makes a manual dump-box when you slide it out. Very, very useful. Loading a fridge (or similar item)? Slide the plywood out enough so it tips onto the ground then just tilt the fridge to rest against the plywood. Pick up the bottom of the fridge & slide the plywood sheet in with the fridge on it. I leave that plywood sheet in my truck all the time so I'm always ready.
I like the first part of the video with the planks and pulleys...lifting a "DRYER" from the steps of the home, then it advances to show lifting a washer in to the pickup...that's kind of deceptive as a washer is MUCH heavier than a dryer.
Hey Stephan , go to harbor freight and buy a dolly for $ 30. and pull your washer step by step until you get into the top and its a wrap. Your ( 3 ) 2x 6 x 8 board cost about $12 /* each . at home depot that will save you $ 6 bucks plus your back . have a nice day
Legs First, this you don't scratch the side of your dryer scratch the crap out of it. Another helpful hint be friendly with your neighbor and get a second set of hands and just carry it up and put it up there
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
Here's another tip you'll like: Cut a sheet of 5/8" plywood to fit your pickup box between the wheel wells, and long enough to cover the full length of your bed with the tailgate up. Rectangle shaped, no cut-outs for the wheel wells. Lay it in your box on top of your nylon box liner ribs. You'll find many uses.
The plywood slides on the nylon ribs (of the box liner) like roller bearings and makes a manual dump-box when you slide it out. Very, very useful. Loading a fridge (or similar item)? Slide the plywood out enough so it tips onto the ground then just tilt the fridge to rest against the plywood. Pick up the bottom of the fridge & slide the plywood sheet in with the fridge on it. I leave that plywood sheet in my truck all the time so I'm always ready.
You mean the fridge will lay down while being transported?
Damn, just loaded my old washer alone into my lifted pickup thanks to you. 😂 god bless you my friend hope all is well!
I like the first part of the video with the planks and pulleys...lifting a "DRYER" from the steps of the home, then it advances to show lifting a washer in to the pickup...that's kind of deceptive as a washer is MUCH heavier than a dryer.
You could speed this up and we still get it. Good techniques but would be done in a fraction of the time with two people!
This was extremely useful thank you.
That's big ass tarp
Hey Stephan , go to harbor freight and buy a dolly for $ 30. and pull your washer step by step until you get into the top and its a wrap. Your ( 3 ) 2x 6 x 8 board cost about $12 /* each . at home depot that will save you $ 6 bucks plus your back . have a nice day
Get furniture pads, put on bed of truck, angle and slide it on. Don't even bother with the wood.
I believe using a dolly would've been a lot easier.
This was so helpful
Awesome
Looks like my truck but with pimp wheels
Awesome 👏 you
Legs First, this you don't scratch the side of your dryer scratch the crap out of it. Another helpful hint be friendly with your neighbor and get a second set of hands and just carry it up and put it up there
Lmfao! Exactly
Smart!