@BIMpossible at roughly 5:55 you somehow select the offset model geometry element/ reference line (pt 4 - pt 3) and the 75 x 75 profile to create the form of the frame. I seem to be stuck, I for some reason can only select the divided path (pt 4 - pt 3) which doesn't offer the create form button. The internal frame lines are fine however and I have managed to create adaptive forms on these reference lines.
fantastic tutorial, loved that it wasnt too slow but still had tooltips throughout with methodology I'm curious as to why the missing column occurs and if there is a way for dynamo to deal with this? Also if there is a method by which dyanmo can apply a different panel to the lowest panel of the shape so as to allow a ground connection rather than diamond panels which go through the ground? I am assuming the only way would be to break the list of quad panels into different sets
Hi! I've installed the "lunchbox package", as it is explained in the red box of the video, but I don't have the "Panel.panelDiamond" node. The most similar that I have is the node "Lunchbox Diamond Grid by Face". With it, I've managed to get something, but not with the same results. Any suggestions? Thanks in advance!
Alejandro Domínguez , if you go into manage packages> show root directory > extra. Then you will find a read me file with a link to download lunch box from the makers website. Downloads and installs really quickly then works
Could it be possible to convert a parametric assembly model from inventor to a generic model with manual adaptive points appointed and use it in the dynamo script?
Hi Cian. Do you get any errors? Have you tried placing a basic 4 point adaptive component in place of the glazed panel? This will let you know if your problems lie within the Dynamo script or the adaptive glazed panel you created.
it's 2018 and some errors still happen, it's better if you use the new update of the package and instead of using "metric generic model adaptive" use the one with "curtain wall panel based in pattern"
if you've loaded the panel onto the project and it looks really weird, like it has twisted, try going back to the family and make sure that the numbering sequence on the adaptive reference points that were first created are on a clockwise sequence on the corners, so hide the structure geometry and just click on the numbers hovering above the adaptive reference points and change accordingly, then load again into project and go to dynamo and drop down the panel type and select the non tinted panel again, worked for me
is there eanyone still here? so my probles is in the last step. when im in the adaptive component by points it outputs everything in a diagonal cross section. help
After setting the panel.paneldiamond panel. Nothing is changing in the structure of the building. Next, it appears an error : Warning: Converting objects to a function pointer is not allowed. Any idea how can I resolve that?
i install the packages : LunchBox for dynamo, LunchBox Quad Grid by face, LunchBox Quad Grid by face Dalian, Diamonds Panels (3pt) and Diamond PAnel (4pt)and dont appear the Panel.PAnelDiamon in the search browser after install the package, whats wrong!?>:O
@@ArmanWu can u please explin installation process. they say they discontiniued building for Dynamo and its giving me only link to the package source code for dynamo?
dont know why but it refuses to build a model in dynamo again after reloading revit, althouth scripts were saved and no error messages popped up. headache for new users as usual, but never give up!
Hola! Yo he instalado el "Lunchbox" tal y como explica en el cuadro rojo del vídeo, pero no tengo el nodo "Panel.panelDiamond". Lo más parecido que me aparece es el nodo "Lunchbox Diamond Grid by Face". Con él he conseguido hacer algo, pero no consigo el mismo resultado. ¿Alguna sugerencia? Gracias y un saludo.
Dear user, with the aim to spread the BIM knowledge we have put your tutorial in our website. You can check it here: www.bimcommunity.com/technical/load/74/dynamo-revit-tutorial We hope it will help the community to know your job and a huge opportunity to grow your exposure worldwide. Please, If you don't want to appear in our website, don't hesitate to contact us and we will remove it from there. Best.
To this day im still coming back here. Fundamentals here is awesome
@BIMpossible at roughly 5:55 you somehow select the offset model geometry element/ reference line (pt 4 - pt 3) and the 75 x 75 profile to create the form of the frame.
I seem to be stuck, I for some reason can only select the divided path (pt 4 - pt 3) which doesn't offer the create form button.
The internal frame lines are fine however and I have managed to create adaptive forms on these reference lines.
"Line in Sketch is slightly off axis and may cause inaccuracies." when I start do the shape of the diamond grid on top.
fantastic tutorial, loved that it wasnt too slow but still had tooltips throughout with methodology
I'm curious as to why the missing column occurs and if there is a way for dynamo to deal with this? Also if there is a method by which dyanmo can apply a different panel to the lowest panel of the shape so as to allow a ground connection rather than diamond panels which go through the ground? I am assuming the only way would be to break the list of quad panels into different sets
I can't able to find that node at 2:24 i have 0.9 version of dynamo... neither in search package can anyone help me out?
Dear sir,
YOU ARE A FUCKING GENIUS! My mind just exploded with countless possibilities that just opened up to me after seeing this. Gracias.
Hi! I've installed the "lunchbox package", as it is explained in the red box of the video, but I don't have the "Panel.panelDiamond" node.
The most similar that I have is the node "Lunchbox Diamond Grid by Face". With it, I've managed to get something, but not with the same results. Any suggestions?
Thanks in advance!
Alejandro Domínguez , if you go into manage packages> show root directory > extra. Then you will find a read me file with a link to download lunch box from the makers website. Downloads and installs really quickly then works
@@jonathanpowell9657 i downloaded it and dont know how to install it mate, really I need your help mate.
Thanks in advance
@@amudanvivek AppData\Roaming\Dynamo\Dynamo Revit\2.12\packages\Lunchbox
Could it be possible to convert a parametric assembly model from inventor to a generic model with manual adaptive points appointed and use it in the dynamo script?
Everything works fine right up until I choose the adaptive component by points. It doesn't insert the glazing panel. Any ideas why this might happen?
Hi Cian. Do you get any errors? Have you tried placing a basic 4 point adaptive component in place of the glazed panel? This will let you know if your problems lie within the Dynamo script or the adaptive glazed panel you created.
I have had the same problem at the adaptive component by points step. I don't know what's wrong with the glazing panel family.
Had the same problem. Solved it by mulitplying dynamo units with 1000 to convert to mm
it's 2018 and some errors still happen, it's better if you use the new update of the package and instead of using "metric generic model adaptive" use the one with "curtain wall panel based in pattern"
if you've loaded the panel onto the project and it looks really weird, like it has twisted, try going back to the family and make sure that the numbering sequence on the adaptive reference points that were first created are on a clockwise sequence on the corners, so hide the structure geometry and just click on the numbers hovering above the adaptive reference points and change accordingly, then load again into project and go to dynamo and drop down the panel type and select the non tinted panel again, worked for me
is there eanyone still here? so my probles is in the last step. when im in the adaptive component by points it outputs everything in a diagonal cross section. help
i try this tutorial but error with notification cant make type "generic adaptive model".. why?
Nice but how do I copy entire code groups ?
After setting the panel.paneldiamond panel. Nothing is changing in the structure of the building. Next, it appears an error : Warning: Converting objects to a function pointer is not allowed. Any idea how can I resolve that?
send me some images i will help. jrmmdjo@gmail.com
what's up!!! hele me broooo~~~~ where is the diamond panel . i already installed lunchbox from package but it is not the same as this tutorial
download the 2018.7.7 file
@@jeanboyable thank u so much, you saved my life)))
@@jeanboyable sory where location can I download this script "diamond" tkyu so much
Great. Thank you for your tutorial
i install the packages : LunchBox for dynamo, LunchBox Quad Grid by face, LunchBox Quad Grid by face Dalian, Diamonds Panels (3pt) and Diamond PAnel (4pt)and dont appear the Panel.PAnelDiamon in the search browser after install the package, whats wrong!?>:O
same
You can install from.. provingground.io/tools/lunchbox/
@@ArmanWu can u please explin installation process. they say they discontiniued building for Dynamo and its giving me only link to the package source code for dynamo?
can anyone help please the adaptive component not working
dont know why but it refuses to build a model in dynamo again after reloading revit, althouth scripts were saved and no error messages popped up. headache for new users as usual, but never give up!
Hola, no tengo el nodo "Panel.panelDiamond" y no lo puedo bajar
Instrucciones a las 2:22 (texto rojo)
Hola! Yo he instalado el "Lunchbox" tal y como explica en el cuadro rojo del vídeo, pero no tengo el nodo "Panel.panelDiamond".
Lo más parecido que me aparece es el nodo "Lunchbox Diamond Grid by Face". Con él he conseguido hacer algo, pero no consigo el mismo resultado. ¿Alguna sugerencia?
Gracias y un saludo.
I loved it absolutely
Hearst Tower tutorial please.
Amazing bro, I did it in 1 hour with 16 minutes; you´re amazing! thanks a lot! new subscriber!!
hi can you help me out the lunchbox doesn't work i'm using revit 2019 dynamo 2.0
can anyone help please lunchbox and the adaptive component not working
@@jay-lk8me You need to download Lunchbox from their website, provingground, for that version.
@@cristianmartinez1321 I tried to do so but it only asks me to download the source code repository. can u explain how u did it for revit 2019 version?
Do a tutorial for a fireplan in dynamo!!!
can you send me panel.paneldimond plugin
Thank you so much
I wish this kind of tutorials didn't depend much on packages.... now that those packages are not available I guess I'll need to figure it out
gracias
Dear user, with the aim to spread the BIM knowledge we have put your tutorial in our website. You can check it here: www.bimcommunity.com/technical/load/74/dynamo-revit-tutorial We hope it will help the community to know your job and a huge opportunity to grow your exposure worldwide. Please, If you don't want to appear in our website, don't hesitate to contact us and we will remove it from there. Best.
amei
do slow.....
reproduce at 0.5 speed