TPOB swears the echo blade "snags" on multiple hair textures but I have yet to have it snag on me and it's the sharpest blade out the factory that I have ever used
@@korybarron32 it’s because it snagged on a barber who did a review of the saber 2 clipper. In that particular review the barber was doing a cut and you can see it snag and the barber mentioned it. So TPOB ran with it
My “Jeep” blade set up had no problem being bolted right onto my instincts and they had the same crunch as the echo blade setup . I didn’t need to use that extra tension spring tho.
Brother, I just tested the Jeep Blade on my VGR's and they fit perfectly and crunch extremely loud, perhaps even louder than the ones from MRD. It also performs insanely well.
I got the jeep blade i put it on my instincts. I don't use the blue cutter. I use the regular deep tooth sc cutters. They fade really nice way better then a faper blade. These cut the way a faper blade should have all along
I have that jeep blade also. Its not good because it covers so much surface and its thicker than the standard cutting blade. So it creats a heck of a lot friction. It gets super hit where it will burn . Like the Andis Masters taper blade for Corded and Cordless. If you change the the cutting blade of the masters to a ceramic. That ching crunch is completely gone. It looks like in combination with the andis still blade , the cutting blade has to be metal. Not ceramic or some type of synthetic.
Good video bro. It’s definitely the still blade .the Blurr blade had a way louder crunch than that MRD. Obviously 2 complete different sizes and uses for em. But it crunches crazy .shit sound like the fight scene in kill bill with the katanas . But I do have a remedy for you to use it on your favorite clipper. Take a dremel with a bit to shave metal almost of em do it . But that it’ll fit in the 2 holes of the blade. And. Just shave down. So you’re able to push the still blade up higher. Should be a very simple mod.
Usually check the slack in the cam follower, if the cutting blade juggles or has additional play, then its the blade rattling when you turn the device on. Remove the extra vibration, or if thats not the problem , then sometimes its the spring in hlw it relates to the cam follower
Bro i will buy the blade for 60.00. Do you have the link? Have you purchased one yet? Just the blade? They keep asking me to buy 2 trimmers and that they will send the blade. Just feels wrong though.
yes I have you need to contact the seller directly, send them a message on aliexpress they will give you a link to the blade this is the seller a.aliexpress.com/_mqRyMla
Link to the blade: a.aliexpress.com/_mOFTmE4
Also the Andis Phat blade and the Blur blade make that echo crunch sound
i noticed that too
Man I cant wait for the echo blade comes out.
It's already out
Its $80 🤦🏾♂️
@@jovanjubert4046i been looking everywhere
TPOB swears the echo blade "snags" on multiple hair textures but I have yet to have it snag on me and it's the sharpest blade out the factory that I have ever used
TPOB is a hater. I swesr his videos are biased AF and the other dude from buffalo who reps Gamma/SC.
@@korybarron32 it’s because it snagged on a barber who did a review of the saber 2 clipper. In that particular review the barber was doing a cut and you can see it snag and the barber mentioned it. So TPOB ran with it
TPOB needs meds. I hate his annoying accent also.he needs to get dealt with.
This video was what we all needed! I'm sad because I'm still waiting on my Jeep blade and now I know it won't work with my clippers
It even feels like a magnet motor it cuts so smooth
My “Jeep” blade set up had no problem being bolted right onto my instincts and they had the same crunch as the echo blade setup . I didn’t need to use that extra tension spring tho.
Same here, got mine yesterday and they fit perfectly fine and sounded exactly how I wanted them to sound.
interesting, gonna look into it more
Where can I get the jeep blade
I put it on my instincts too and the blade gets really loud in the middle clicks it’s weird I really wanna keep the blade on them tho
Brother, I just tested the Jeep Blade on my VGR's and they fit perfectly and crunch extremely loud, perhaps even louder than the ones from MRD. It also performs insanely well.
Which vgr?
@@Str8_Cutz VGR V-460
@@AmethystCAE is it the VGR with 2 speeds? Does it have a matching trimmer option?
@@jovanjubert4046 Yes and also yes, it does have a matching trimmer option. It's the v-460
It's VGR 640, not 460
Don't confuse people
Try it on an XO clipper. The cutting blade is longer on the XO.
I’ve been looking for it but I don’t need anymore clippers just the blade
The name of this blade in our country: crescent teeth
I'm gonna order a set of Echos for my Instincts and see if they the whole setup fits or just the still blade.
Dang, I ordered that jeep blade 😂 it sounds like it still crunches, just not that loud.
Yea it crunches . Just a lil tender 2 piece crunch . I want that blu cutter tho. In that x shape it much weigh very very light.
Is there a link for the blue cutter? The link just shows their other blades.
You need to do more testing with more clippers in my opinion
I got the jeep blade i put it on my instincts. I don't use the blue cutter. I use the regular deep tooth sc cutters. They fade really nice way better then a faper blade. These cut the way a faper blade should have all along
So i put the jeep still blade on my fx one lo pros and they crunch like crazy.
MRD ALL THE WAY BRO 🔥‼️🦾
Bro, does your MRD cutting blade keep hitting the guards when the lever is closed?
have you tried using the same moving blade but changing the still blade?
The link doesn't work - can you double check? there is no moving blade, just fixed blade options
Great video!!! Please send the link to buy those clippers please
it’s on my other video on the clippers in my youtube
I have that jeep blade also. Its not good because it covers so much surface and its thicker than the standard cutting blade. So it creats a heck of a lot friction. It gets super hit where it will burn .
Like the Andis Masters taper blade for Corded and Cordless. If you change the the cutting blade of the masters to a ceramic. That ching crunch is completely gone. It looks like in combination with the andis still blade , the cutting blade has to be metal. Not ceramic or some type of synthetic.
How often do u use the sabre 1.0 clipper ? I’m thinking of getting them
Dang.. ordered the Jeep blade for no reason now
Good video bro. It’s definitely the still blade .the Blurr blade had a way louder crunch than that MRD. Obviously 2 complete different sizes and uses for em. But it crunches crazy .shit sound like the fight scene in kill bill with the katanas .
But I do have a remedy for you to use it on your favorite clipper. Take a dremel with a bit to shave metal almost of em do it . But that it’ll fit in the 2 holes of the blade. And. Just shave down. So you’re able to push the still blade up higher. Should be a very simple mod.
bro that’s funny af ima try do some research into that blur blade and i’ll try that Dremel trick soon
@@chasecutshairi need a video of you with the dremel, bc im con fused. Been trying to make a magnetic motor cordless master
What's up Chase. I put this blade on my TPOB Play but it makes it a lot louder. Any suggestions on what might be wrong??
Usually check the slack in the cam follower, if the cutting blade juggles or has additional play, then its the blade rattling when you turn the device on. Remove the extra vibration, or if thats not the problem , then sometimes its the spring in hlw it relates to the cam follower
Great review!
Whats the link for the mrd blade
Contact them directly on aliexpress the blades themselves cost $60
a.aliexpress.com/_mqRyMla
Yes, please provide link for the stationary echo blade. Thank you
a.aliexpress.com/_mOFTmE4
Bro i will buy the blade for 60.00. Do you have the link? Have you purchased one yet? Just the blade? They keep asking me to buy 2 trimmers and that they will send the blade. Just feels wrong though.
yes I have you need to contact the seller directly, send them a message on aliexpress they will give you a link to the blade this is the seller
a.aliexpress.com/_mqRyMla
I purchased it they created a special link for me and updated the price but make sure you message them directly
a.aliexpress.com/_msnq6Oy
Link?
a.aliexpress.com/_mOFTmE4
Osinski Junction
I hear it cutting but the results are not my fave.
maybe the metal used could be the reason it sounds different