If you look closely that rubber mat was not all the way under the entire quick jack making it not evenly flat, it wasn’t the humidity or heat it was simply poor placement of the jacks it was just enough offset for any tug to rock the jack as it did
Agreed. I have a quickjack, the ZL1 add-ons adapters and an ats-v (same basic chassis). This was user error all the way. When properly used, the quickjack should actually be safer and more stable, especially on cars like this that don't have proper lifts points for both jacking the car up and then setting it on stands.
I think it's nice to have others who appreciate more of a "tuned" sounding exhaust that is deep and adds actual performance than an obnoxiously loud raspy exhaust that could be heard miles away. Good to hear the family is doing well, and glad to hear you didn't die this past week! Many Blessings.
Your video did influence me to get the AWE touring version non resonated. I hooked it up this weekend and words do not do it justice. It was like night and day the sounds, the extra power, back to the sounds. The factory exhaust was so quiet, I couldn't hear the down shifts, the burbles, or much of anything. Now it is so much fun to drive and the head turning is so noticeable as others here me coming through. This one is in the sweet spot. Not crazy loud but, just right. I am happy and can't wait to drive it whenever I can!
Those lifts and jack stands should NOT be on rubber mats. They need a solid surface. Lay down a 3/4 inch or better sheet of plywood if you need to protect the floor.
Besides the scare that you had I’m glad you made it out! The Camaro sounds so much better! And the exhaust looks amazing. This made me decide on going the same exhaust
I have AWE track edition but for my 17 5.0 and honestly I always get complements on it and its just so loud it pops and crackles best exhaust you made the right choice
Yup, rubber mats and the left Quick Jack was off the edge of the mat (@6:23) at the front inside corner..... Not really sure you can blame Quick Jacks on this one....
Did the k-member recently on my fox on my quickjacks. Shook the hell out of the car those rubber blocks don't move at all if centered on them. I have to agree it's the mats those quickjacks are on.
My car slipped off a jack itself while going up. I now have permanently mounted ZL1Addons pinch rail blocks and Quickjack 5000 with the extension bars.
Wow that was lucky! I have the same AWE exhaust and also LOVE, LOVE it! Mine sounds even better with a stage 4 cam! Looking forward to the new spoiler install.
I have a set of those quick Jacks. I have had zero issues with them and had them for the past five years. My Dad's 65 mustang he used to have sat on them for a good 2 or 3 months straight and never had anything be a concern. But anything can happen. Glad your safe and bad ass camaro!
Glad you and the fam are feeling well. I really missed watching last week. Uh oh, I feel an 80's song coming on..........don't know what you got til its gone.....
FYI I'm here from a future video about this: Quick-jack... a previously super expensive scissor lift that could lift your 4,000lb vehicle but randomly decide not to is now $3000 rather than $15,000. I priced one out years ago, and thats what the price was to barely lift my 5,000lb truck, with a max of 6,000lb lol I've been around heavy trucks before, working with my dad on 3/4 and 1 ton trucks and heavy farm equpiment. Where if it can't lift 2.5 - 3 or 4 tons via a bottle/floor/ or jackstand, we don't buy it let alone have it under a truck. I've looked again in 2023, its only $3,000 for a 7000lb "full frame" lift. Funny because my Dakota has a 131" wheelbase and thats small compared to the 3/4 and 1 ton trucks we've owned curb weight at 7000 and run up to 11,000lbs with 142" WB.
Glad you were saved by the stands. I looked at a lot of options for my home shop to lift cars, including QuickJacks, and in the end went with a full-sized, ALI certified, lift.
My buddy Devin was always a car guy.. he was almost finished with his C10 twin turbo LS swap truck.. He even had a 2 ton lift in his driveway and always took precautions. Last year on Easter Sunday, his family member came over for dinner. They had an issue with their suspension. His lift had a project on it already and his driveway was full so he grabbed his floor jack and jacked up the car to take a look real quick. Something happened and the jack slipped. Car fell on him and he ended up passing away while his family was all inside having a good time. They came outside and found him dead. He should've used a jack stand along with the floor jack. He was only 34 years old. *ALWAYS USE JACK STANDS AND TAKE PROPER SAFETY PRECAUTIONS*
Been using my Quickjacks for over three years. Never a problem and have done engine and transmission swaps. If only using the blocks provided.. I only lift from the frame. I prefer lifting from the pinch welds for more space. Quickjacks make specific pinch weld blocks. I’d highly recommend getting those. Lol
Yeah, I’m super paranoid, when it comes to my car falling off , I tend to keep it on jack stands if I’m under it and will also put a tire as a last resort safety measure is the car falls on that and not me
There was an episode of Powerblock where they smashed headers on an engine why it was on the dyno. They actually picked up power (weird). I doubt that pancake section has any appreciable effect on the flow. That quick jack is pretty freaking cool though. Might have to look into one of those
Just added long tubes to my stock mufflers, and its pretty loud now. I thought about going to this AWE touring setup but after listening to how loud this is I'm not so sure that's a good idea.
Same thing happened to me with my crew cab gmc Sierra while rotating my tires. But I wasn’t under it. Crushed the jack stands and the jack. Harbor freight jack stands and aluminum jack. Upgraded to 6 ton jack stands and 3 ton steel jack now. 😂👍
Always Saving my life motivational..... Going through hell everyday to get by . But thanks to your motivation to post everything. Drive my goals to step up my goals, views, uploading to my channel. I have loved busting my butt all my life and now almost going on 3 years starting to post my as well .....
I think you stacked the rubber block at the pinch weld mine squish a lot and are about 1-2cm from the quick jack. I tried once the stack them as they say it's possible but was scarry. I use plywood to correct not leveled floor they say it in the manual
That was a scary shift. When and where did you place the jack stands? There are quite a few scenes of you guys going under where it appears that there no jack stands present. I didn't see any 6:22 to 6:24 nor 7:14 to 7:28 I see two in the distance down at 7:33 that are down and do not appear to be under the car and then right as the shift happens at 7:37 you can see two larger stands but it is hard to tell where they are located or if they are even under the car but they definitely are not touching the vehicle before the shift. I'm curious did the pinch weld bend over or did that contribute to issue? I have been using the QuickJack pinchweld blocks (on top of the medium blocks) for a few years and have never had an issue. But I am lifting a much lighter Miata.
Thats so scary! I have the lift jack pads and I think it takes me much longer to just make sure the lift pads and the rubber blocks are centered when i lift my camaro on the quick jack! Definitely need to ensure that the lift pads under the car are centered on the rubber blocks from the quick jacks! Glad nothing major happened and you are ok!
@@LonestarHawaiian we had it on the black block too. Plus it was at max weight. Lol 4 wheel parts in waipahu told us we couldn't lift the truck in 1 day. We did with a lot of lessons learned.
I can add to this.. i got AWE touring black tips for my 18 WRX and the exhaust quality is great and those diamond black double rolled tips are best quality you can get!! Now you need some reworked heads and a bigger cam!!😈
Salute , staying safe double up with the jack stands. I have two Chevy Avalanche trucks in the air on jack stands for a while now while swapping the transmission in them. Car sounds amazing, my biggest dream car there.
EDIT: Original Quickjack comment was about them failing. But it does appear as if the car actually slips of the quickjack itself. I had a friend who had a quickjack mechanical failure and was lucky that he had stands in place as well. I've seen a youtube video of a failure but in that scenario I believe it was user error.
Super stoked you had FOUR stands underneath. A lotta folks will only use two. But either way, now that you’re not dead by way of the Camaro, cam that thing out!!
Glad you're safe man. It's always scary being under a car but jack stands make the biggest difference. Quick Jacks are good but Jack Stands are better.
This guy is so intelligent by saying he only put stands under the car for video prepose only so he doesn’t get ate up in the comments 😅 very smart thinking bud @4:25
For me as I'm older and a mustang guy, the s550 comes with resonators as well, which imo, cleans up the sound. Midas well have put on shitty sounding corsa extremes. Good on ya, big bux!
I’m exhausted just watching this video. I just paid $150 to get my exhaust swapped. I could, and have done it myself, but I guess I’m just getting older (and richer).
I use my quick jack all the time with my ZL1.and no issues. I have changed motor mounts, headers and dropped rear cradle on my Z. You definitely had do to something wrong. Also I don't trust those magnetic pads I use the ones you screw on.
Chad you are awesome!!!! I kid on Christmas morning.... love your energy!!! When I installed my flowmaster on my tahoe the muffler guys told me the exhaust will get deeper in time with the heat... think that will happen with yours?
I own a QuickJack for my SLC and totally understand the humidity and heat being in Louisiana. With the SLC being so low, I had to cut down the rubber blocks so they just stick above the rails so they would slide under the car. While I have yet to use QJ on my ZL1, did you use the tall or shorter blocks when it slid off (I think my QJ came with 2 sets)?
The shorter ones actually. After reviewing the footage the car actually moved very very slowly for two hours. It was scary to watch. After two hours it finally gave way. Blocks are now in the trash
@@LonestarHawaiian I've always been scared of the QJ doing just that, try not to leave it in the air overnight unless needed. Good to hear was the shorter ones, I like your replacements, I plan to copy it for mine. Always a pain to get the rubber blocks properly placed on the QJ while it's slid under the car. Thanks for the reply.
@@LonestarHawaiian BTW thanks for the ZL1 video showing roof difference. I have no sunroof as well and never noticed how much shape the roof has without a sunroof. It's the little things
I don’t understand. Ive seen MANY MANY MANY MANY people use Quickjacks and never have to use jackstands. What went wrong here? Did it just slide off a block you used or something?
No way would I get under quick jacks without any supports. I need an alternative to floor jack and jack stands but nothing about the quick jacks give me the warm & fuzzies.
Damn that was crazy. Glad to see you and your friend are good. I’m still ordering my quick jack soon. Will or do you the flag for your channel available for sale? Keep up the great work with every vehicle. Trail boss is my next one since I have a 6.2 2013 Silverado already. Take care.
![Full CARBON - ZL1 1LE [Big Wang] Wing 😎 + Unleashing AWE Tuning Bald Eagles](http://i.ytimg.com/vi/x1bwojoXwP4/mqdefault.jpg)
![Full CARBON - ZL1 1LE [Big Wang] Wing 😎 + Unleashing AWE Tuning Bald Eagles](/img/tr.png)
No way I ever trust my life to just a jack. Never. Always have stands in place. No exceptions. Glad your stands saved you!
Same here. No matter what I put stands in place jus incase. Better safe than sorry.
Quickjax lock into place just like a jack stand.
@@Rekkless wouldnt trust them junk things either
💯💯💯💯💯💯
If you look closely that rubber mat was not all the way under the entire quick jack making it not evenly flat, it wasn’t the humidity or heat it was simply poor placement of the jacks it was just enough offset for any tug to rock the jack as it did
Agreed. I have a quickjack, the ZL1 add-ons adapters and an ats-v (same basic chassis). This was user error all the way. When properly used, the quickjack should actually be safer and more stable, especially on cars like this that don't have proper lifts points for both jacking the car up and then setting it on stands.
I think it's nice to have others who appreciate more of a "tuned" sounding exhaust that is deep and adds actual performance than an obnoxiously loud raspy exhaust that could be heard miles away. Good to hear the family is doing well, and glad to hear you didn't die this past week! Many Blessings.
Your video did influence me to get the AWE touring version non resonated. I hooked it up this weekend and words do not do it justice. It was like night and day the sounds, the extra power, back to the sounds. The factory exhaust was so quiet, I couldn't hear the down shifts, the burbles, or much of anything. Now it is so much fun to drive and the head turning is so noticeable as others here me coming through. This one is in the sweet spot. Not crazy loud but, just right. I am happy and can't wait to drive it whenever I can!
Glad you had those stands! Man that was scary!!
So glad you’re ok we’re not quite done with you yet on this earth! This is a great reminder to use the jack stands
Just got an all stock super low mileage 2018 zL1. Im loving the content but not sure how much my wife appreciates the inspiration lol.
Not a lot of "spouses" are a fan of my channel 😅 Thanks for watching!
Glad u Bought the AWE Exhaust , Took my Advise , & Made in the USA , PA !!!!!!! LOVEEEEEEEE IT !!!!!!!!!!!!!!!!!
You should add a mini split a/c to your garage. Only use it when you working in the garage. Just an idea 🤷🏻♂️
My dad has a minisplit in his garage. 80 in the summer, 50 in the winter. 80 degrees with no humidity is surprisingly cool when it's 100 outside.
Those lifts and jack stands should NOT be on rubber mats. They need a solid surface. Lay down a 3/4 inch or better sheet of plywood if you need to protect the floor.
I was thinking the same thing
Besides the scare that you had I’m glad you made it out! The Camaro sounds so much better! And the exhaust looks amazing. This made me decide on going the same exhaust
I have AWE track edition but for my 17 5.0 and honestly I always get complements on it and its just so loud it pops and crackles best exhaust you made the right choice
I noticed you had a thick rubber mat under neath everything. Did that have any effect on the stability of the jacks? Close call for sure.
Yup, rubber mats and the left Quick Jack was off the edge of the mat (@6:23) at the front inside corner..... Not really sure you can blame Quick Jacks on this one....
Did the k-member recently on my fox on my quickjacks. Shook the hell out of the car those rubber blocks don't move at all if centered on them. I have to agree it's the mats those quickjacks are on.
Like the majority of comments, I'm just glad you are alive to talk about it after the fact.
My car slipped off a jack itself while going up. I now have permanently mounted ZL1Addons pinch rail blocks and Quickjack 5000 with the extension bars.
Awesome sound man. I thought it sounded good stock but the after blew me away.
Wow that was lucky! I have the same AWE exhaust and also LOVE, LOVE it! Mine sounds even better with a stage 4 cam! Looking forward to the new spoiler install.
Thats just ridiculous and badass congrats on being alive and enjoying that badboy
I have a set of those quick Jacks. I have had zero issues with them and had them for the past five years. My Dad's 65 mustang he used to have sat on them for a good 2 or 3 months straight and never had anything be a concern. But anything can happen. Glad your safe and bad ass camaro!
It was the rubber mats
Glad you and the fam are feeling well. I really missed watching last week. Uh oh, I feel an 80's song coming on..........don't know what you got til its gone.....
🤙🏽🤙🏽
FYI I'm here from a future video about this: Quick-jack... a previously super expensive scissor lift that could lift your 4,000lb vehicle but randomly decide not to is now $3000 rather than $15,000. I priced one out years ago, and thats what the price was to barely lift my 5,000lb truck, with a max of 6,000lb lol I've been around heavy trucks before, working with my dad on 3/4 and 1 ton trucks and heavy farm equpiment. Where if it can't lift 2.5 - 3 or 4 tons via a bottle/floor/ or jackstand, we don't buy it let alone have it under a truck. I've looked again in 2023, its only $3,000 for a 7000lb "full frame" lift. Funny because my Dakota has a 131" wheelbase and thats small compared to the 3/4 and 1 ton trucks we've owned curb weight at 7000 and run up to 11,000lbs with 142" WB.
Hearing them eagles scream is awesome. Perfect exhaust set up fits the car just right.
O shit! That would have ended badly for me with my luck! Glad your ok, and the exhaust, 🤌🏼 perfect
I found that out the hard way, thankfully my dad was right there, i had a bruised chest/sternum area and alot of shortness of breath
This video is very wholesome. Car looks and sounds amazing. Great video!
I got a quick hydraulic lift and I normally use that to lift my car up, as a precaution I also put a concrete block under every tire
Glad you were saved by the stands. I looked at a lot of options for my home shop to lift cars, including QuickJacks, and in the end went with a full-sized, ALI certified, lift.
My buddy Devin was always a car guy.. he was almost finished with his C10 twin turbo LS swap truck.. He even had a 2 ton lift in his driveway and always took precautions. Last year on Easter Sunday, his family member came over for dinner. They had an issue with their suspension. His lift had a project on it already and his driveway was full so he grabbed his floor jack and jacked up the car to take a look real quick. Something happened and the jack slipped. Car fell on him and he ended up passing away while his family was all inside having a good time. They came outside and found him dead. He should've used a jack stand along with the floor jack. He was only 34 years old. *ALWAYS USE JACK STANDS AND TAKE PROPER SAFETY PRECAUTIONS*
I use a 2 post lift and always shake the car once it’s a few inches off the ground to make sure it’s on secure!! Glad you didn’t get hurt bud
I watched this video in its entirety and I'm still in shock at 7:40
he ain’t even show it all worst video everrrrrrrrr
The best mod I did on my C7... AWE exhaust..... it sounds awesome!!
It sounds amazing! Great job and choice of exhaust. Love the black tips too!
They are soooo good 🙌🏽
@@LonestarHawaiian dam I think I will be doing this exhaust but track edition
@@LonestarHawaiian why u get with mufflers ?
Been using my Quickjacks for over three years. Never a problem and have done engine and transmission swaps.
If only using the blocks provided.. I only lift from the frame. I prefer lifting from the pinch welds for more space. Quickjacks make specific pinch weld blocks. I’d highly recommend getting those. Lol
Damn... that is crazy loud. Glad you're safe and not squished.
If you are near Austin let me know. Would like to hear it next to my GT3FIDDY
Yeah, I’m super paranoid, when it comes to my car falling off , I tend to keep it on jack stands if I’m under it and will also put a tire as a last resort safety measure is the car falls on that and not me
Glad you are ok.. God Bless... keep on keeping on
The quick jacks should have arms that lock in. I also have a set and have had the opposite problem where they shoot up and drop one side
There was an episode of Powerblock where they smashed headers on an engine why it was on the dyno. They actually picked up power (weird). I doubt that pancake section has any appreciable effect on the flow.
That quick jack is pretty freaking cool though. Might have to look into one of those
Interesting. Thanks for the info!
Love the quick jacks, but the blocks they came with are in the trash now. 2x6s for the win 👍🏽
I had an AWE touring exhaust on my 19 WRX and loved it. Wish you alot of luck with it.
Just added long tubes to my stock mufflers, and its pretty loud now. I thought about going to this AWE touring setup but after listening to how loud this is I'm not so sure that's a good idea.
Always great videos
Can't wait for the next one
Same thing happened to me with my crew cab gmc Sierra while rotating my tires. But I wasn’t under it. Crushed the jack stands and the jack. Harbor freight jack stands and aluminum jack. Upgraded to 6 ton jack stands and 3 ton steel jack now. 😂👍
It sounds as good it looks.
Always Saving my life motivational..... Going through hell everyday to get by . But thanks to your motivation to post everything. Drive my goals to step up my goals, views, uploading to my channel. I have loved busting my butt all my life and now almost going on 3 years starting to post my as well .....
I think you stacked the rubber block at the pinch weld mine squish a lot and are about 1-2cm from the quick jack. I tried once the stack them as they say it's possible but was scarry. I use plywood to correct not leveled floor they say it in the manual
My father was a mechanic and he always stuck some tyres under the vehicle aside the jacks.
My dad always did that lol
That was a scary shift.
When and where did you place the jack stands?
There are quite a few scenes of you guys going under where it appears that there no jack stands present.
I didn't see any 6:22 to 6:24 nor 7:14 to 7:28
I see two in the distance down at 7:33 that are down and do not appear to be under the car
and then right as the shift happens at 7:37 you can see two larger stands but it is hard to tell where they are located or if they are even under the car but they definitely are not touching the vehicle before the shift.
I'm curious did the pinch weld bend over or did that contribute to issue?
I have been using the QuickJack pinchweld blocks (on top of the medium blocks) for a few years and have never had an issue.
But I am lifting a much lighter Miata.
Thats so scary! I have the lift jack pads and I think it takes me much longer to just make sure the lift pads and the rubber blocks are centered when i lift my camaro on the quick jack! Definitely need to ensure that the lift pads under the car are centered on the rubber blocks from the quick jacks! Glad nothing major happened and you are ok!
Glad your alive and unharmed. Stay safe brother 🤙🏼
Yo bro it happend to us with those lifts when we was lifting a 2020 gmc truck. Glad we added the jacks. But still it was hang on 1 jack, barely.
Lesson learned for me… the blocks give way after a while in the air. Super scary
@@LonestarHawaiian we had it on the black block too. Plus it was at max weight. Lol 4 wheel parts in waipahu told us we couldn't lift the truck in 1 day. We did with a lot of lessons learned.
That would’ve effed my head up for a while. I would have had to stop for the day.
The exhaust... NICE. Also, glad you're ok :)
Exhaust by far the best👌👌
12:53 ....... THAT'S WHAT SHE SAID!!!
holy shite... This video could help a lot of people
I can add to this.. i got AWE touring black tips for my 18 WRX and the exhaust quality is great and those diamond black double rolled tips are best quality you can get!! Now you need some reworked heads and a bigger cam!!😈
Salute , staying safe double up with the jack stands. I have two Chevy Avalanche trucks in the air on jack stands for a while now while swapping the transmission in them. Car sounds amazing, my biggest dream car there.
It sounds awesome. I'm glad you and the family are feeling better. And Always use jack stands.
As always man we love the content. Keep it coming, keep up the mods 🤟🤙
Glad you are ok! The exhaust sounds awesome! I’m sure your neighbors are hating you 😆
If they don’t I’m not doing my job 😎 #murica
@@LonestarHawaiian is the Track edition louder ?? I’m not sure what to get . Track edition or mbrp race edition..
Bro!! Sup from the Big Island!! LOVE that Sig Hurley hat 🤙🏼🤙🏼🤙🏼
Sounds great! Love these videos.
EDIT: Original Quickjack comment was about them failing. But it does appear as if the car actually slips of the quickjack itself. I had a friend who had a quickjack mechanical failure and was lucky that he had stands in place as well. I've seen a youtube video of a failure but in that scenario I believe it was user error.
Happy your ok the same happened to me but with a suburban, unfortunately I did not have jackstands as a secondary, 10 out of 10 would not recommend.
Great Video bro, appreciate it.. i’m legit debating between this and the Corsa Extereme
I had the same debate. Corsa doesn’t sound as refined as AWE. I love the deeper rumble and tone 👌🏽
@@LonestarHawaiian ok question, does it have NPP still? i didn’t notice in the video.
Another great video my Braddah 🤙🏼🤙🏼
A Mini split/ductless system would be perfect for your garage it heats and cools and doesn't take alot of space
Super stoked you had FOUR stands underneath. A lotta folks will only use two. But either way, now that you’re not dead by way of the Camaro, cam that thing out!!
Awesome sound !
Sounds awesome music to my ears
Glad you're safe man. It's always scary being under a car but jack stands make the biggest difference. Quick Jacks are good but Jack Stands are better.
Just recently got a used 2018 ZL1 and loving your channel. What made you pick the AWE over the Borla?
This guy is so intelligent by saying he only put stands under the car for video prepose only so he doesn’t get ate up in the comments 😅 very smart thinking bud @4:25
Glad you safe hawaiian
For me as I'm older and a mustang guy, the s550 comes with resonators as well, which imo, cleans up the sound. Midas well have put on shitty sounding corsa extremes. Good on ya, big bux!
You’re saying you prefer the stock sound?
It was cool seeing you at Cinemark yesterday unless I freaked out some random guy and I was wrong.
I’m exhausted just watching this video. I just paid $150 to get my exhaust swapped. I could, and have done it myself, but I guess I’m just getting older (and richer).
Honestly the stock exhaust doesn’t sound so bad
👍👍👍 gald your ok.
Car sounds sick...
Is that a carbon spoiler I see in the background 😏😏
I use my quick jack all the time with my ZL1.and no issues. I have changed motor mounts, headers and dropped rear cradle on my Z. You definitely had do to something wrong. Also I don't trust those magnetic pads I use the ones you screw on.
I have quick jacks and would say don't use rubber mats under your quick jacks
Sweet rides bro 👍🇺🇸
If this is the touring I can only imagine what the track exhaust sounds like
Get garage door insulation panels, youre welcome. Makes a ton of difference alone.
Chad you are awesome!!!! I kid on Christmas morning.... love your energy!!! When I installed my flowmaster on my tahoe the muffler guys told me the exhaust will get deeper in time with the heat... think that will happen with yours?
I own a QuickJack for my SLC and totally understand the humidity and heat being in Louisiana. With the SLC being so low, I had to cut down the rubber blocks so they just stick above the rails so they would slide under the car. While I have yet to use QJ on my ZL1, did you use the tall or shorter blocks when it slid off (I think my QJ came with 2 sets)?
The shorter ones actually. After reviewing the footage the car actually moved very very slowly for two hours. It was scary to watch. After two hours it finally gave way. Blocks are now in the trash
@@LonestarHawaiian I've always been scared of the QJ doing just that, try not to leave it in the air overnight unless needed. Good to hear was the shorter ones, I like your replacements, I plan to copy it for mine. Always a pain to get the rubber blocks properly placed on the QJ while it's slid under the car. Thanks for the reply.
@@LonestarHawaiian BTW thanks for the ZL1 video showing roof difference. I have no sunroof as well and never noticed how much shape the roof has without a sunroof. It's the little things
That ZL1 sounds looks and is insane how do you drive a manual while recording such skill
Glad you’re safe! But now you gotta get on AWE to make a CBE for the Trail Boss
AWE FTW
My dream car
I don’t understand. Ive seen MANY MANY MANY MANY people use Quickjacks and never have to use jackstands. What went wrong here? Did it just slide off a block you used or something?
No way would I get under quick jacks without any supports. I need an alternative to floor jack and jack stands but nothing about the quick jacks give me the warm & fuzzies.
I had a classmate killed by the car falling on him. Glad your ok.
Scary stuff man
Do you have any other mods? Picking up my new ZL1 1LE this weekend and want it to whine like this after break in!
Damn that was crazy. Glad to see you and your friend are good. I’m still ordering my quick jack soon. Will or do you the flag for your channel available for sale? Keep up the great work with every vehicle. Trail boss is my next one since I have a 6.2 2013 Silverado already. Take care.
did you get a light with this set up? corsa is stating that you will need a tune with their catback system
Indeed the good Lord was watching over you that day. Glad to see that you were unharmed and the car sounds awesome.
That's funny, I have the Awe touring exhaust with awe resonated downpipes on my audi s4
It’s such a good system. I love it!
@@LonestarHawaiian mine is only a supercharged v6 but has an amazing Porsche sound