thank you for the video, i just Inherited my dads old 2004 dodge ram 3500 need to do a few little things to her, have a nasty leak just like the one you're describing in the video, glad to know its easy more or less and having the part numbers for everything was awesome!!
Loved your video it was awesome how detailed yet quick the video was. It got straight to the point and I was able to follow each step exactly as you did them. No bullshit since you were on camera thank you for doing this it saved me a shit load of money and was awesome that I didn't need to ask for help. Please keep it up!
thanks for the vid. I have same leak and already replaced cover gasket, o ring on cap, o rings on bolt and still leaking. Next is the rocker box gasket. thanks for the part numbers too!
Great video! I need to do this as well. I was trying to identify what looks like a VGV actuator for a turbo down by the turbo? Is that a BD Screamer turbo on there? Cheers, Lyle
Joe Simon thanks. I ended up doing the who job today. No problems and torqued the injector nuts to 11in/lb, 18 ft/lbs on the rocker box and valve cover box.
Cody Lynskey well you want to know something funny? Just found out my oil fill cap was leaking. Oil made its way down to the bottom of the oil pan. Never thought of that.
+Cody Lynskey lol totally. I only did my rear main because I had my trans out. But I did have a slight leak from the back of the engine that dripped down the side of the block which I thought was my valve/rocker gasket. Who knows could have been the full cap the whole time.
Ok , best video yet!! This one didn't scare me to just take to a mechanic. I feel confident that I can do this. Thanks!! 😀
thank you for the video, i just Inherited my dads old 2004 dodge ram 3500 need to do a few little things to her, have a nasty leak just like the one you're describing in the video, glad to know its easy more or less and having the part numbers for everything was awesome!!
Honestly one of the best repair videos I've seen
Thank you!
Loved your video it was awesome how detailed yet quick the video was. It got straight to the point and I was able to follow each step exactly as you did them. No bullshit since you were on camera thank you for doing this it saved me a shit load of money and was awesome that I didn't need to ask for help. Please keep it up!
Thank you!
thanks for the vid. I have same leak and already replaced cover gasket, o ring on cap, o rings on bolt and still leaking. Next is the rocker box gasket. thanks for the part numbers too!
+ismael marquez your welcome thanks for watching!
Excellent video and great articulate explanation.
Glad I watched this vid I know know where the damn crankcase breather is
It is a tricky one to find if you didn’t know where it was!
Very well done explaining everything ! Loved it !
Thank you!
Well done. Thanks!
Thank you!
Great video. Thank you.
What is the torque of the valve cover?thanks good video
Great video! I need to do this as well. I was trying to identify what looks like a VGV actuator for a turbo down by the turbo? Is that a BD Screamer turbo on there?
Cheers,
Lyle
Do u kno the torque specs for injectors,rocker box,and valve cover gasket?
Only thing this vid is missing
Hey after u degreased rockers. U left it. Or ? Can I use brake cleaner
I washed the degreaser off with water. I guess you can use brake clean but not sure if it will work as good.
ever figure out what those extra grommets were for?
Good video. Did it fix the leak though. I have the exact same problem
Well after I replaced all the gaskets I noticed majority of the oil was coming out of the oil fill cap so yes I did solve the leak.
Before you replaced the valve cover gasket.. did you have mild white smoke coming from the engine and a faint odor?
Are you on cummins forum?
Did you torque the injector nuts down to a certain degree or just hand tight?
Just tight enough to do the job. Got to be careful there pretty small and probably easy to strip.
Joe Simon thanks. I ended up doing the who job today. No problems and torqued the injector nuts to 11in/lb, 18 ft/lbs on the rocker box and valve cover box.
Rocker box 10 mm bolt in front just rounded on me so im fucked
Damn it man that sucks. Let me know how you solved it and maybe it could help someone else that might be having the same problem.
How did you know it wasn't your rear main?
Cody Lynskey watch my other video replacing my rear main.
Thanks. I have some hefty leakage under mine. Not sure how to tell if its the rear main or the valve and rocker gaskets.
Cody Lynskey well you want to know something funny? Just found out my oil fill cap was leaking. Oil made its way down to the bottom of the oil pan. Never thought of that.
Haha damn. they might as well put a giant main pan under the entire engine to catch all the oil these things refuse to contain.
+Cody Lynskey lol totally. I only did my rear main because I had my trans out. But I did have a slight leak from the back of the engine that dripped down the side of the block which I thought was my valve/rocker gasket. Who knows could have been the full cap the whole time.
Is that a VGT turbo on a 03 cummins??? How did you set up the tune?
Watch my turbo swap videos in my playlist and find out!