You are quite knowledgeable about the L3130. Any idea why my loader tilt is literally frozen when left not running below freezing. I changed the fluid but it’s still happening. It functions if I start it and let it run for 15 or 20 minutes to warm the fluid.
No idea right off hand. I would start the diagnostics by swapping the hose circuits. Put the lift (normally white/yellow) onto the Red/blue couplers, and vice versa. See if your tilt cylinders works fine when hooked up to the lift circuit. See if your lift cylinders work fine when hooked up to the dump circuit. Does the problem follow the cylinders or the valve?
I build a different type of kit for constant flow. Even more affordable and easier install than this switching valve. Check out the install video: th-cam.com/video/OeFj5bxMH9c/w-d-xo.htmlsi=Txo1jqxxjjVAizjC
@@TractorInnovations i have a kubota LA 525 put a summit third function on it then decided to have rear power beyond for the backhoe. The hoses for the power beyond hoses and the third function go to the same port. So i bought t fittings to hook both hoses to pb and return up by the main valve. When i plug the backhoe in to the power beyond it won't work unless you push the button for the third function.
It is hooked up incorrectly. I do consulting if you want me to look through your setup, via pics or FaceTime, figure out what to wrong and recommend a fix and parts. $50/30min. I have no doubt I can have you fixed up in 30 minutes.
Yes, there will be a little additional for the international shipping, but I can split some of that cost with you. Email me with info about your tractor. tractorinnovations@gmail.com
I need this dual rear remote....that looks easy
You are quite knowledgeable about the L3130. Any idea why my loader tilt is literally frozen when left not running below freezing. I changed the fluid but it’s still happening. It functions if I start it and let it run for 15 or 20 minutes to warm the fluid.
No idea right off hand. I would start the diagnostics by swapping the hose circuits. Put the lift (normally white/yellow) onto the Red/blue couplers, and vice versa. See if your tilt cylinders works fine when hooked up to the lift circuit. See if your lift cylinders work fine when hooked up to the dump circuit. Does the problem follow the cylinders or the valve?
Hello could this system work just constant for a backhoe?
I build a different type of kit for constant flow. Even more affordable and easier install than this switching valve.
Check out the install video:
th-cam.com/video/OeFj5bxMH9c/w-d-xo.htmlsi=Txo1jqxxjjVAizjC
@@TractorInnovations i have a kubota LA 525 put a summit third function on it then decided to have rear power beyond for the backhoe.
The hoses for the power beyond hoses and the third function go to the same port. So i bought t fittings to hook both hoses to pb and return up by the main valve. When i plug the backhoe in to the power beyond it won't work unless you push the button for the third function.
It is hooked up incorrectly. I do consulting if you want me to look through your setup, via pics or FaceTime, figure out what to wrong and recommend a fix and parts. $50/30min. I have no doubt I can have you fixed up in 30 minutes.
Hey ! It’s possible to buy from France ?
Yes, there will be a little additional for the international shipping, but I can split some of that cost with you. Email me with info about your tractor. tractorinnovations@gmail.com