My GARMIN LIVESCOPE Install with POWERBOX
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- I install Garmin Livescope on my 06 Skeeter ZX200. I use a 30 ah Lithium battery to power the Livescope so that it is free of other possible interferences and I don't have to worry about it draining my cranking battery down throughout the day.
INTRO Music provided by
www.bensound.com/
Str8-Up-Moun...
www.iceholepower.com/ USE code GORDON10 for 10% off your order.
ampedoutdoors.com/
summitfishingequipment.com/pr...
#GarminLivescope #Iceholepower #ampedoutdoors #fishing - กีฬา
THANK YOU SIR FOR TAKING THE TIME TO SHOW THIS OLE BOY HOW TO DO IT RIGHT. JUST ORDERED ME A POWER BOX FROM ICE HOLE POWER
I have not regretted my set up. Still love it. It has done everything I expected. I also use the power box for other applications. I'm glad I could help and thanks for watching. 👍
You really got to clean set up there very nice job especially with the battery box getting ready to start on mine thanks enjoyed the video
Thank you. I have really been pleased with it and the battery performance for my needs. I also have used the Power Box for other things more than I thought I would. Good luck with your setup.
Great walk through video!
Thanks for watching.
I ALSO LOVE HOW THE BOATS ARE PARKED IN THE GARAGE, AND THE VEHICLES ARE NOT
😁 Priorities man. 🎣
Thanks you for sharing this with us.
I appreciate you for your support.
I love my livescope! Have been considering making the Lithium battery jump for a while.
A lot of people are going this route to power their LS. Amped Lithiums are hard to find right now. Everyone is out of stock. Thanks for watching.
Just came across your video. Great job on your box!
I appreciate it. I have used it for more than just my LS power. You make a great product and with the help of your assembly videos it's easy to assemble. Thanks for watching.
Great video. I did the same on my boat. I too was worried about being wired to my AGM
and taking a chance on dead batteries
Only difference I did was:
Installed separate power leads. I put in box 2 ports/leads and each have their own connection.
Will unplug when charging
I would like to know if the box is large enough to keep the charger inside with 30Ah and wired to battery and piggy backed connectors
And just have the charger cord outside the box ready to plug in to ac.
I installed my box jn back of boat in a compartment with my Minnkota Chargers.
Maybe will add a lighted voltage indicator to box as might be nice to see voltage at green light and full charge and be able to read voltage end of day for curiosity
My 1st ever lithium.
Thanks for sharing your install.. We all learn on YT from your folk’s dedication. Appreciate it
I store my charger in the power box sometimes. The box is big enough for 2 of those 30 ah wide batteries so you might be able to do what you have in mind. I also use the power box for other things occasionally. A year later and I am very pleased with the performance. It does exactly what I intended. Thanks for watching.
@@GordonPettieFishing Thanks I will do the same I didn't know if the charger would create a heating issue. Like my 2 MInnkota 4 Bank charger does.
@@daveholte7658 The charger does get a little warm. I'm not sure I would leave it inside the box while charging. I have the small 3 amp charger. I just keep it inside the box after charging sometimes.
@@GordonPettieFishing OK The compartment I am putting the box in with 2 other chargers for 5 batteries in my boat I always prop up the cover during charging as it gets warm and just want the heat to escape. These chargers are on 24/7 365 days a year. With the box charging the lithium I would prop open the cover Give it a try. Question with the 2 SAE Power socket I will install one for each power, does it matter when I unplug them which one I plug the charger into? I did look on your video and did not find a wiring schematic? Maybe you dont have one and just refer to the time on the video? If not no worries. Thanks
@@daveholte7658 You will have to wire whichever one you want to be able to charge through that port. Ice hole power has a specific video that shows exactly how to do that. I watched that one to wire mine so I could charge. Ice Hole power has a you tube channel that shows step by step how to wire the boxes.
I've got the same boat looks like with thus far the same setup. Need about 25' of red 10G and 25' of black 10G if your going all the way back to cranking battery like I plan on doing with a relay in between the batter red and your red or hot headed up front. 2013 skeeter zx20 here
I actually have a seperate wiring harness for my other electronics. I made it with the same components of a very popular POWER HARNESS that's on the market for a fraction of the cost. You can see glimpses of it when I am in my rod locker. You are pretty close on your estimates for the lengths you need. I plan on putting an extension with a plug that I can use if I need a couple of hours extra for my Livescope. I will just.plug the power wires from my Livescope into that. I can get 9 to 10 hours out of the 30 ah battery for the Livescope. I have ran it dead a few times after being on the water all day in the Summer months.
Did you hook up the water ground on the black box? And did you use the ferrite bead? Great video I have a very similar setup with the power box so this helped me out thanks!
I have not hooked up the water ground. Also have not used the the ferrite . I have not had interference issues so neither needed. Thanks for watching and I'm glad it has helped you. I'm still using the same set up.
Have you seen any drastic voltage drops after you've been on the lake for a while using the livescope? Like dropping from 13.2v to around 11v? I'm wanting to do the same setup but I have heard after 10+ hours of use the voltage drops pretty bad. I fish a lot of 7 to 7's and offshore fish most of the summer is the reason I ask.
I have gotten a little over 10 hours out of this battery with my set up several times. The voltage does drop slowly throughout the day but I wouldn't call it drastic. It was in the low 11's voltage wise. If you fish 12 hours I would go with a bigger amp hour battery. My Livescope was still performing the same even at the end of those 10 hour trips but I'm sure this battery was reaching close to it's amp hours limit.
I know this was sometime ago but love youre setup and I am just this spring going to do the same. One question so when you are using the charger im assuming you have to unplug it everytime to hook the charger into it? Thanks again for the vid
In my setup on this box, you would have to. If you had two SAE ports, you could use one for charging. The switch has to be on to open the circuit for power or for charging. I think you will like this setup. I still like mine, and I use the box for other things as well.
How do you like the Sr8up mount now that you’ve used it? Do you have a good view of the bottom of the Garmin or does the top of your helix get in the way of the bottom of your Garmin? I’m getting a 1222 to put on with my Helix 12. I am worried that I won’t have a good view of the Garmin. I’m also worried that I won’t be able to fit my bow lights in the socket. I have a 2010 FX20. The bow looks a lot like yours.
I have been VERY pleased with it. I can see the entire screen with no problems. It is very sturdy and no bouncing or vibration when running, even in rough water. There are several mounting holes in the plate that allow you to stagger the units as you need for placement. I appreciate you watching. Good fishing.
Could you explain how you spliced the two together with the easy connector from amped? I ordered basically everything you have here and wanted to run both the garmin screen and blackbox off of the single amped battery. Your video had helped me a ton!
I just used electrical connectors big enough for 2 negative wires and 2 positive wires from the unit and the black box and then to the easy connector wires going to the power box. I used heat shrink over the connectors just as an extra water proofing step. I'm glad the video has helped. I still am very pleased over a year later. Thanks for watching 👍
If you had another garmin at the console do you think that console graph could also be hooked up to the battery box in unison with the bow graph?
Yes you could. I would be sure and use at least 10 gauge wire to the battery. Also be sure the battery will be big enough in amp hours to accommodate your needs in a day for the 2 units and the black box. Amped Outdoors has a chart on their web site that shows how much each unit draws and the black box. Thanks for watching.
Hey man just found your channel. Enjoyed the video. I am installing LiveScope on my boat tomorrow. How is this battery working out for you?
It has done everything I expected. I have gotten 10 hours of fishing a couple of times and it was still running when I loaded the boat. I've also used the portable box for other battery power needs as well. Thanks for watching.
Thanks for sharing. I purchased the same box from icehole power and wired it per their video using the SAE port. Did you wire the same way? If so I'm so glad I found your video I will power my 93sv and livescope black box exactly like you did. Thanks again.
Yes, I watched their video to build mine. In one of his videos, he talks about wiring the SAE port to be able to by pass, in order to use it as a charge port. You will use one of the switches as an on/off that goes to the SAE port. That switch has to be on to charge and to power from that port. The main power does not have to be on to power from that port with the switch. I'm glad I could assist you with this video. I have used my power box for other things as well. Thanks for watching.
Nice Video. I am going with the Garmin 1022 GPSMap since I have a Bird and 360 already on the bow. Gave up waiting on the Mega Live, plus I think the Live Scope has a better image. JMO. How many hours do you get out of your battery with your setup? Also I assume you bought the AMPED wide version instead of the tall?
I have gotten 10 hours a couple of times and it was still running when I loaded the boat. It was in the low 11 volt range so it was probably getting close. It's the wide version. I wanted the one that would fit in the box. Thanks for watching.
@@GordonPettieFishing That box is big enough to put another battery in there and run them in parallel, increasing your run time.
@@ribbs67 Yes it is.
good info where did you get the plate to you added to your mount?
Str8-UP Mounts is the name of the company. I hope this video helped. Thanks for watching 🎣
Really like your setup!! I am in the process of doing something very similar on my boat. I built the ice hole power battery box with amped outdoors lithium batteries. I noticed you used a summit mount for your transducer and you mounted it port side. Just curious if you are happy with the mount and port side mounting? Great video!!
I actually changed it to the Starboard side. When I raised my trolling motor back to stowed position my HB units transducer was rubbing and I didn't want to damage it. So I changed the LS transducer to Starboard side. I didn't notice any difference in performance from the port to starboard side. I have been very pleased with set up about a year later. I have used my power box for other applications more than I thought I would too. Thanks for watching. Good luck with your set up.
Great video, going to order when I get home. What do I exactly need if I want to run my black box off the sae port? Thanks!
They have everything you need at www.iceholepower.com Everyrhimg I needed came in the kit I ordered. They even have a few how to videos. Thanks for watching 👍
I see that you had purchased the same 60ah Amped battery. I just watched a video as you suggested on the battery box. Any chance you secured the battery with the velcro strips?
Yes. The velcro strips are attached to the box and battery to help secure it inside the box. Thanks for watching.
How do you like the transducer mounted on the trolling motor? If on spot lock does it not prevent you from looking in one direction?
Personally I wouldn't have it any other way. I like to have my hands free and be able to search and cast freely. I also bass fish a lot and I like to be able to search and have my hands free to cast at any time as well. When using spotlock it's all about boat positioning. With practice you can learn to position the boat and use spotlock and still be able to see your target most of the time. I only need to see my jig as it is approaching my target area or fish. I become a line watcher after that anyways. I don't have to see my jig or target 100% of the time, but it is nice when you can. Great question by the way. 👍
@@GordonPettieFishing Thanks so much for the input. Still saving up for the package like you installed. That makes a lot of sense. Due to back problems I have transitioned to mostly crappie fishing and would like to see how the fish react to different presentations. Thank you
Dang, that’s a really smart setup. Wish I did mine like this. Took me like 2 hours just to figure out how/where to install the power switch 😂
I appreciate it. I have been pleased with it after almost a year of use. The power box is great to be able to use for other purposes as well. I have been able to get a little over 10 hours with just running the Livescope several times. Thanks for watching.
I wired my blackbox and front monitor together to the sae pigtail like you did, can i put a switch on the blackbox side to turn off if i only want to run my front monitor? my box only has the one sae port. - Kevin
Yes you could. Ice Hole Power has actually come out with a newer box that has 2 SAE ports just for that. I also made a video for that box as well.
You can just add an additional switch to your box as well.
I’ve got the seelite adaptor with the knock off dewalt batteries, not sure I like it I have had it for 2 years, might need a new change, where did you get the power source box any help would be great
This is the power box in the video.
www.iceholepower.com/product-page/power-box-with-sealed-lead-acid-batteries
They have come out with a smaller cheaper alternative. I also did a video on that box.
www.iceholepower.com/product-page/ihp-boat-box
You can use code GORDON10 for 10% off at Ice hole power.
What size bolts/screws do you use to secure the black box?
I used size 10-24×3/4 with a washer and lock nut. Thanks for watching.
is the amped battery just for the black box? Or can you run your screen as well on same battery, Garmin 1222? Not getting a good picture on my unit like most videos. Made tons of changes to settings with no luck, want to see my bait.
I have the screen and black box hooked to the Amped battery. You can do it either way. I would suggest doing a factory reset to default. Adjust gradually from there. It's easy to get things out of whack when you adjust alot. It can change from Lake to Lake and day to day. Once you get close you shouldn't have to adjust alot to get good results. It's also VERY important to have your jig in the cone to be seen. Sometimes that takes a little practice. The cone is actually not that wide, if you are off just a little you won't see your jig at all. Thanks for watching.
@@GordonPettieFishing Thanks alot! and totally agree. I didn't mention but was in shallow water 4ft using forward view, and a range of roughly 60 ft. occasionally i could see my bait not long. My screen constantly had lots of clutter, like sun rays?. Taking it again this friday to crappie fish some deep docks to see if it works better.
Mind sharing what size of deck mount from Str8up that is?
I actually had the deck mount fabricated myself. It is a 2 inch rise. The plate is from Str8up. Thanks for watching.
Have you had any issues since the power wire for the plug that comes with the box is only 14 gauge and garmin recommends 10 gauge?
Zero issues. Only a few feet from the power box to my black box and unit. Not enough for any significant voltage drop.
@@GordonPettieFishing Appreciate it. I'm installing the exact same set-up this weekend, just trying to make sure I have all ducks in a row. Thanks!
Curious how you wired your box, did you tie the black box and screen together and connect it to the battery charging port
Any info would be appreciated
Yes. I connected the unit power wires and the black box power wires together and connected them to the plug wire that connects to the charging port. Some people prefer to just connect the black to the seperate stand alone battery. Your battery will last longer as it only draws about .75 ah. I have been able to get 9 to 10+ hours out of the 30 ah battery with the unit and black box together. Thanks for watching 👍
Some of his boxes now come with 2 Sae ports. You can also buy extras and wire them in as you see fit.
Could I run my wires for my normal transducer and unit to my main battery’s and just run my livescope wires to the lithium battery?
Yes you could. There are some who do that. You will get more amp hours from the Lithium battery if you do that.
I picked up that same summit bracket today, can’t wait to install it. How do you like it??
I have zero complaints. Still have that exact same one you see in that video. I hope it works out for you. 🎣
@@GordonPettieFishing tight lines brother! I’ll keep you posted! 🔥🎣🔥
I just bought the ice fishing bundle wit the same battery and wondering how can I wire in a power switch to shut off the black box and how can I wire in a couple USB’s?
There are several Videos here on you tube that give a step by step. Ice hole power also has some great videos that show that. I watched their video of how to put together and wire the power box. Thanks for watching.
@@GordonPettieFishing yeah I am talking an ice bundle.. not in a boat where you have a main power switch. I’ve searched and no one has a video like that. Never heard of the channel you mentioned I’ll take a look
@@xGR1MxREAPERx My box has a USB and a 12v plug and a main power switch that I can turn on and off. You can get all accessories from ICE HOLE POWER website. You can get just what you want or an entire kit.
Do you need a lithium battery charger for lithium batteries or can you keep be on board charger on your boat for lithium batteries
You need a charger specified for Lithium batteries. Some chargers will charge Lithium batteries but will not top them off to their full capacity .
@@GordonPettieFishing I have a 70 thrust trolling motor I want to change the old batteries to lithium can I just swap out the old batteries without any other changes other than a new charger so they push
@@carlslaughter1401 No changes other than a charger that's capable of charging them fully.
What is the Exact battery size and the case come with the battery
The 30 ah battery is the WIDE, it is
5 8/8 L x 3 29/32 W x 5 1/8 H
The power box is
13.5 L x 7.4 H x 8.5 Outside Dimensions
11 L x 5.8 W x 7.2 H inside Dimensions
Specs can be found at AmpedOutdoors and Ice Hole Power websites.
What size fuse is in your power box?
The fuse inside the box is a 10A. I used the one supplied with the kit that came with mine. 👍
Where did you get the battery
I got it from Ice Hole Power. I don't think he sells them anymore since he is doing battery reviews. Amped Outdoors is selling them right now about as quick as they get a shipment in.
Thx