Fantastic video demonstration and explanation, you guys are the worlds best! I currently only have your Minimontolit as it is my first time trying Montolit, but since I've been so impressed i will get one of these new cutters for sure! Best regards from Texas, USA.
Just bought my first cutter from you guys. Montolit P5 The 36in. Looking forward to its first use. Switching over from years of Rubi use. Bought the Table one and love it.
Great demo!!!!!! Bravissimo!!!!! 😀 I still with my 50y old models from my grand father, but I think that one would be the best upgrade that I need for the usual jobs! Can you tell me when it will be available in Australia (Melbourne)? 🙂 Grazie Mille!!!!!!!
@@buildingtools2675 thanks. Shortly after this post mine came. Got to use it for the last part of a shower project. Been tiling for almost forty years. Even this cutter has a slight learning curve. Thanks again.
In this video the man doesn’t always lift the handle to release the rubber snapper from its lock. Why does he sometimes lift it before he snaps and other times he doesn’t. I thought you always had to raise it slightly in order the release the rubber snapper. Was this just a mistake or for a reason?
Hi, raising the handle and releasing the rubber snapper is giving a wider leverage, very useful for thin cuts, fragile tiles, mosaics and cutting in angle. For normal cuts it is not necessary, you can save a lot of time just splitting the tile at the end of the incision.
@@MontolitTilingTools Thanks! I have the P3 and it’s the best cutter I’ve ever owned. When snapping the tiles should you hold the tile with one hand or is it better to not touch it at all?
Здравствуйте. Многие пользотватели ваших станков говорят, что смазка способствует накоплению мусора под режущим диском. Смазка это хорошо. Но установите в ручке пыле уловители из войлока. Так, чтобы они охватывали рельс спереди и с зади. А так же охватывали режущий диск. В таком случае пыль не попадёт ни на диск, ни на ролики внутри ручки. Пыль и микро осколки работают как образив. Что-то подобное раньше устанавливали в магнитофонах, для отчистки резиновых ремней от пыли (белый войлок). Ни у одного производителя нет этих элементов. Даже у тех, кто делает плиткорезы с подачей смазки.
@@MontolitTilingTools you mean the leangth or what ? The model ive got ist from hufa but i think ITS the p 3 Basic from the Looks . ITS the Version in 610 mm so the handle From the P3 masterpiuma would fit without any Problems in thery. But the p5 ist the one i would Like
Кстати. Мне не ответили на электронное письмо в вашей организации. Пришлось искать другой путь покупки и доставки. Друзья помогли купить в Российской Федерации в Москве (более 4000 км от меня). Жду доставку. Трудно было дать адрес и телефон представительства в Москве?
Very excited to use the P5!!!
This guy is the best. I'll buy anything he's selling
Before watching this I read this comment and laughed… now I’ve watched it and I want 2.
Hahahahah same 😂😂😂😂 @@mikewaters6980
¡Montolit a la vanguardia!
Se ve Execelente la P5...
Saludos a todos desde Aguascalientes México 🇲🇽.
Fantastic video demonstration and explanation, you guys are the worlds best! I currently only have your Minimontolit as it is my first time trying Montolit, but since I've been so impressed i will get one of these new cutters for sure! Best regards from Texas, USA.
Ciao, thanks for the feedback! My colleague Giuseppe will be in Texas from march 28th. Please send him an email at export@montolit.com
😊😊pó❤
😊
does this machine cuts marble tiles? @@MontolitTilingTools
Just purchased a 93 masterpiumaP5🎉. Can’t wait to use it.
Love my P3 it’s been a real asset
Is it big enough for 600 x 600 ? Trying to see online, but it isnt very clear. Sorry to hassle you.
@@7eVen.si62 I have the 36" size cutter so that would easily cut 600mm tile
@@DJWerkz Thank you 👍I bought the P3 this morning.
@@7eVen.si62 depending on how much use it will get I would get a spare cutting wheel. Also keep a supply of the oil
@@DJWerkz I did actually buy a cutting wheel but not the oil. Is the oul for only porcelain tiles or all ?
Just bought my first cutter from you guys. Montolit P5 The 36in. Looking forward to its first use. Switching over from years of Rubi use. Bought the Table one and love it.
@handy Have You Used P5.. You Like It. Regards
How does your cutter work? Is it any good? I have also p5, ten days now, total disappointment. Tile braker I call it
Just order one. My first professional tiling tool👍👍
I love mine! How do you like it?
Just got a 49 can't wait to try it out. 👌
That was a great demo. Thank you.
titanium wheel with stainless steel guide it's a very good improvment vs P3. Great work
Thanks for your support guys!
bravo , love the machine ！solute from canada
amazing Italian machine.
How do I get one in Indiana? This cutter looks awesome and I need a new one.
Please call my colleague Mike 715 302 4087
I pre ordered mine here: www.contractorsdirect.com/montolit-masterpiuma-p5-tile-cutter
Just ordered !
Where can I buy one my p3 is a beast still had it for 2 years
Where are you located?
Hawaii ,I would like to order it online
@@808mexi Please call my colleague Mike 715 302 4087
I pre ordered mine here: www.contractorsdirect.com/montolit-masterpiuma-p5-tile-cutter
Whats the difference between the evolution 3 and p5
I looked for this p5. I am using p3 at the moment. You are selling these in Holland too?
Yes, please call Ronald 653 812987
I need a 30 inch cutter im used an ishii forvyears i like that non slidd pad all the new cutters don have that
Great demo!!!!!! Bravissimo!!!!! 😀 I still with my 50y old models from my grand father, but I think that one would be the best upgrade that I need for the usual jobs! Can you tell me when it will be available in Australia (Melbourne)? 🙂 Grazie Mille!!!!!!!
Yes it is available in Australia!
Please send an email to Matteo.casartelli@montolit.com
When can I buy one?
Hi, where are you located?
Philadelphia pa usa
@@gregorygartner1630 Please call my colleague Mike 715 302 4087
I pre ordered mine here: www.contractorsdirect.com/montolit-masterpiuma-p5-tile-cutter
I heard this was coming out. Why does it sound different? Also, I'm from Illinois, USA. Who do I contact? Mike?
Yes please, contact him
I pre ordered mine here: www.contractorsdirect.com/montolit-masterpiuma-p5-tile-cutter
@@buildingtools2675 thanks. Shortly after this post mine came. Got to use it for the last part of a shower project. Been tiling for almost forty years. Even this cutter has a slight learning curve. Thanks again.
In this video the man doesn’t always lift the handle to release the rubber snapper from its lock. Why does he sometimes lift it before he snaps and other times he doesn’t. I thought you always had to raise it slightly in order the release the rubber snapper. Was this just a mistake or for a reason?
Hi, raising the handle and releasing the rubber snapper is giving a wider leverage, very useful for thin cuts, fragile tiles, mosaics and cutting in angle. For normal cuts it is not necessary, you can save a lot of time just splitting the tile at the end of the incision.
@@MontolitTilingTools Thanks! I have the P3 and it’s the best cutter I’ve ever owned. When snapping the tiles should you hold the tile with one hand or is it better to not touch it at all?
@@ozziegb we do recommend to press down the handle so that the tile is not moving, with the other hand tap for splitting 👍
Hey do you guys have the p5 in Canada ?
Yes it is available! Please send an email to development@montolit.com
Thanks
I’m located at Orange California USA
Where can I buy one please!
Ciao, please send an email to Jason.gauert@benojgundlachco.com
Здравствуйте. Многие пользотватели ваших станков говорят, что смазка способствует накоплению мусора под режущим диском. Смазка это хорошо. Но установите в ручке пыле уловители из войлока. Так, чтобы они охватывали рельс спереди и с зади. А так же охватывали режущий диск. В таком случае пыль не попадёт ни на диск, ни на ролики внутри ручки. Пыль и микро осколки работают как образив.
Что-то подобное раньше устанавливали в магнитофонах, для отчистки резиновых ремней от пыли (белый войлок).
Ни у одного производителя нет этих элементов. Даже у тех, кто делает плиткорезы с подачей смазки.
very nice tile cutter, where can I buy P5 in Canada Calgary. who is your representative in Canada?
thanks
Hi, it will be available very soon through Prosol
@@MontolitTilingTools Nevermind I just cancelled my amazon order I will be buying the P5 instead through Prosol. Thanks
What is the difference between Montolit 125P3 125/49 and Montolit 125P5?
Hi. I would like to buy Power 5 as soon as possible. I'm from Poland who to contact?
www.protilertools.co.uk/search?category_id=&search=montolit+masterpiuma+P5
Can the Handle from the p3 basic changed to that from the p5 ?
Yes it is possible.
You just need to check when ordering because there are 2 different sizes for the handle, it depends on the bar.
@@MontolitTilingTools you mean the leangth or what ? The model ive got ist from hufa but i think ITS the p 3 Basic from the Looks . ITS the Version in 610 mm so the handle From the P3 masterpiuma would fit without any Problems in thery. But the p5 ist the one i would Like
Can this one cut 48 in tile?
Looks awesome. 1000 bucks on amazon. interesting.
Where can I buy this p5 in Nigerian
Like my comment is not problem but given a vital information how to make a purchase in Nigerian is . thank you.
Fino a che misure arriva per tagliare di lungo ad esempio una finto legno da 130
Dipende dalle misure, abbiamo una misura fatta per tagliare 131 cm 👍🏻 La misura più grande è 161cm
Donde la puedo comprar en colombia
Sold
Per tagli a rombo che misura ci vuole ?
Dipende da che misura le serve. Qui può trovare una tabella con le misure della diagonale www.montolit.com/prodotto/masterpiuma-power-5/#datitecnici
Why would you put sticker ruler in a such nice tile cutter . Is been 1 week it already came off .
Hello, sorry about your issue. Can you please tell us where are you located?
Кстати. Мне не ответили на электронное письмо в вашей организации. Пришлось искать другой путь покупки и доставки. Друзья помогли купить в Российской Федерации в Москве (более 4000 км от меня). Жду доставку.
Трудно было дать адрес и телефон представительства в Москве?
пожалуйста, напишите на matteo.casartelli@montolit.com
Он может помочь тебе
@@MontolitTilingTools чем помочь?
My jaw dropped when he ripped a 1”x24” sliver into half inch slices. That’s absurd accuracy and power
Again mashine for left handed.Why the demonstrator dont put the tile on the right side of the mashine were is longer measurment then do the nerow cut.
Tamil
Do you guys make a US version with Inches?
Hi, yes of course. It is already available all over US
If anyone wants to see a side by side of P3 and P5 I just did one
th-cam.com/video/xr3fgKiSMAc/w-d-xo.htmlsi=bFRsZbVvSx1j1fCv
The worst tile cutter i ever used .
Why?
Why?