Great tut :) I am considering to get the s4, but need help wif some questions, hope u could help :) 1) i would be using both normal vinyl and timecode vinyl, is there a way to switch between the two quickly as i plan to mix it back to back. 2)can i switch my turntable channel back to my samples decks quickly. 3)can audio from regular vinyls be recorded to the software/loops section. **my planned setup is 2 technics turntable and a kontrol s4 Thanks in advance. :)
Excellent tutorial, just picked up the time code vinyl and was having an issuing getting the configuration correct, excellent pace and delivery. Now to order the book!!!!
I've an S4 and Reloop 8000's. This video was perfect, helped me give me the idea to run both scratch and vinyl control with 4 decks running 2 as live inputs
last year i bought traktor kontrol s4 and it comes with traktor pro 2 ..now i just bought traktor z2 and it comes with scratch version..please help me how should i install..should i remove the pro version and install the new scratch version.or should i continue to install scratch pro and will i end up with both the version in my mac...help really needed...
set the decks input to live input mode by clicking on the down pointing arrow on the top right corner of decks C-D and rout your cables from the CDJ's into the back of the Kontrol S4...I have been doin it this way until I can get Scratch upgrade.... but I like being able to play live decks through tractor this way as it gives me access to the effects section...so I might hold out on the update...as I am sure ya can find a usable version of scratch with timecode in a Torrent somewhere
hello, I have traktor scratch A6 and 2 reloop 6000 turntables + a vestax dj mixer. i follow ur tutorial to set up the hole combination and configuration but the sound quality is very poor (bad) when i play a track troughout the timecode vynil and even when i play a normal vynil troughout the thru mode from the A6 sound card. Bref is there something that i've done wrong or my A6 sound card is defected??? i need a help please.
I have a S4 mk3 running om traktor 3 version. I have 1 sl1200 connected which is complete 100% technical ok. I can't get a good signal and see in red Low Input. Stange is that it works wel and the sound is ok, but i cant get 2 nice signal cirkels from. I realy don't know what i do wrong???
Hey ! Can you please tell me if there is solution to fix my problem. MY traktor S4 MK2 has this problem of not able to load tracks using load button right side on deck B. Also sometimes it auto loads the track into deck B. The buttons and cue tack 1 button flickers light and there is no problem whatsoever with the left side .can someone help me .
Great tut :) I am considering to get the s4, but need help wif some questions, hope u could help :)
1) i would be using both normal vinyl and timecode vinyl, is there a way to switch between the two quickly as i plan to mix it back to back.
2)can i switch my turntable channel back to my samples decks quickly.
3)can audio from regular vinyls be recorded to the software/loops section.
**my planned setup is 2 technics turntable and a kontrol s4
Thanks in advance. :)
Excellent tutorial, just picked up the time code vinyl and was having an issuing getting the configuration correct, excellent pace and delivery. Now to order the book!!!!
For some reason the icons (with the turntables) don't shine. They appear but they are not bright. Can't find the reason why. Help?!
When you are talking about the software - it won't let me change the scope. It is greyed out and i can't change it
can you help?
Gibts das auch in deutsch
I've an S4 and Reloop 8000's. This video was perfect, helped me give me the idea to run both scratch and vinyl control with 4 decks running 2 as live inputs
gibts das auch in deutsch? währ ganz nett.
I connected the decks but the the volume is so weak. Seems everyone has the same issue and NI have no fix -.-
last year i bought traktor kontrol s4 and it comes with traktor pro 2 ..now i just bought traktor z2 and it comes with scratch version..please help me how should i install..should i remove the pro version and install the new scratch version.or should i continue to install scratch pro and will i end up with both the version in my mac...help really needed...
does the s4 comes with tracktor scratch pro or do I need to purchase TSpro and S4?
I have turntables already, please help thank you
Hi, noticed that the BPM is fluctuating in Traktor, when using the Timecode.Is this normal?
In the input routing my 4 options are "Traktor Kontrol S4 Ch C L" ... instead of "In Ch C left". Does this means something is wrong?
plz help only one of my tracks r working on tracktor how do i fix this?
set the decks input to live input mode by clicking on the down pointing arrow on the top right corner of decks C-D and rout your cables from the CDJ's into the back of the Kontrol S4...I have been doin it this way until I can get Scratch upgrade.... but I like being able to play live decks through tractor this way as it gives me access to the effects section...so I might hold out on the update...as I am sure ya can find a usable version of scratch with timecode in a Torrent somewhere
How do I put "Timecode" on preference???
thnks how works this with the s5
This was very good thanks.
hello,
I have traktor scratch A6 and 2 reloop 6000 turntables + a vestax dj mixer. i follow ur tutorial to set up the hole combination and configuration but the sound quality is very poor (bad) when i play a track troughout the timecode vynil and even when i play a normal vynil troughout the thru mode from the A6 sound card.
Bref is there something that i've done wrong or my A6 sound card is defected???
i need a help please.
I have a S4 mk3 running om traktor 3 version. I have 1 sl1200 connected which is complete 100% technical ok. I can't get a good signal and see in red Low Input. Stange is that it works wel and the sound is ok, but i cant get 2 nice signal cirkels from. I realy don't know what i do wrong???
Hey ! Can you please tell me if there is solution to fix my problem. MY traktor S4 MK2 has this problem of not able to load tracks using load button right side on deck B. Also sometimes it auto loads the track into deck B. The buttons and cue tack 1 button flickers light and there is no problem whatsoever with the left side .can someone help me .
Nice video tutorial. Thanks !!
Turn on the CC and have fun :))
Outstanding tutorial! Thank you so much
Thanks so much, just connected my technics and sounds horrible might need to get a pre amp. thanks again
Thank you so much for the big help. 😀👍👍👍👍👍
Thank-you! Very helpful!
Thank you for your help here!!
Thank you !!!
Thanks Klaus Schwab 😂
thx very good
its Bodzin!
Yaldy!
music will not load - low input - working fine then broke over night - apple laptop - numark mixer - tech - turntables
You solve the problem??? I have the same issue
Great tutorial. I feel like I'm getting settled in a Lufthansa flight about to take off. "Please secure your overhead baggage before taking your seat"