Nice find! Lowest connection that i remember is the heated seat control module under passenger seat mine was fried after a flood wouldn't let the car start because of the CAN connection. No other connectors under carpet.
Definitely great idea putting new coil packs their good for about 75k & then they start to go one by one putting new packs in very good idea also empty the gas tank put new fuel filters better to be safe than sorry
Looking forward to this, as I have one. My Suggestions are Clean out fuel tank. New headlights. Front splitter. Paint calipers. Wickerbill spoiler. Rear window spoiler - the most aggressive is the Duraflex Brizio one for the later model, so needs customising. Rear diffuser. Exhaust with big tips. New hood. Starlight headliner. Coloured seatbelts. New stereo. Android Tv screens in head rests. Plus a Whipple supercharger to really draw in the viewers. Loads to mess around with. 👍
Thanks so much for watching and for the comment! Really appreciate all those great ideas & advice, I’ll be looking into everything!!! Stay tuned my friend😄😄
@@freeboydebo14Hahah don’t worry we’ve got tons of 6.1 content coming. We’re coming up on the end of our Charger series and then we will be focusing on this build💪 Lots in store👀👀
I gotta say I love this type of content finding a car at the auction and fixing and giving it to fans is crazy and so generous keep up the great work guys 🚘💯
New upload! I get stoked every time you guys put out content! A part of me is sad that the charger series is coming to an end and the other is happy because we get to see the winner!! The charger series will always be a classic👌🏻 Exited for the 300 content though! Keep it up ABC!! God bless y’all brother 🙏🏻
Dude you’re the best! I’m right there with you, I’m super sad our charger build is coming to an end up super excited to get going with this 300! We couldn’t be doing this without you, thanks so much for all your support!!🙏🙏🙏
next you should remove the back seats and check the fuel and the pump if any sign of water got into there and check the wirings especially through the door or any low spots if it has carbon built up or rust, wish all you the best and keep up the good work and good luck.
Was definitely best to go over & check/change everything! My 17 392 was flood as well and the rear fuse box was fried and had to be completely replaced along with new relays, it was fine afterwards. For whatever reason I’m thinking this SRT8 will end up being even better than the infamous RT Pursuit WB 🔥🔥🔥
Oh wow, flood damage can be scary. Looks like you might have gotten lucky here, as the damage doesn’t seem too bad. The corrosion on the underside might need a closer look, but it doesn’t look like a deal breaker. The fluids looked great when you drained them, with no metallic bits (*whew*). The harness definitely needs inspecting, and make sure you get a look under the carpets and check the HVAC for mold (notice any funny smells?) So unbelievably cool the previous owner saw the video and reached out! If you make shirts/merch for this car, definitely send him one! How funny would it be if he won it back? 😂 This is going to be a fun build. Maybe do a Challenger at some point in the near future, as the MOPAR crowd are already paying attention. Enjoying watching your channel blow up! Have a safe and happy NYE!
You got the oil and trans fluids but don't forget the rear diff. Idk about mopars but many diffs are vented so it could be filled with water. Drive it like that and it'll be done.
@ I love this series and the Pursuit as well. Glad I found your channel I’ve been here since the start. That said, admittedly I’m not a mopar guy but other than the diff, I can’t think of any. You’ll flush the brake fluid as part of your routine maintenance. I just didn’t wanna see you guys accidentally cook that (I suppose) limited slip diff driving it full of water. Keep doing what you guys are doing, great channel. You’re gonna blow up!
@@brandonbman5921So glad you found it too, seriously can’t thank you enough for the support and encouragement!! We couldn’t be doing this without you, thanks again for the watch and your comments😄😄😄
Great video. You really did find a hidden gem 🔥 and very cool that the previous owner reached out to you to let you know what might be wrong with it. Looking forward to more videos 😊
If your car doesn’t start after you replaced the rear fuse box you will probably have a blown fusible link, my 06 300c srt8 had a short and i was going crazy, replaced battery, alternator, pcm, starter and it didn’t want to start, and ended up that the fusible link wire at the bottom harness by alternator was toasted. Replaced and car started right away.
Wow thank you so much for the input!! We have been sitting here thinking about next steps if the new fuse box doesn’t work so I really appreciate your insight here. I’ll look into that for sure!!🙌🙌🙌
@@Atlanticbeachcustomsyesir i am here for it and the build and to support if i dont win it i will continue to support i belive you will build this thing and get it back running on the road where it should be
Nice Project I've been trying to get my hands on a Chrysler 300C, but they are rare in good conditions with the big HEMI engine. At least Here in Germany. Much Love and anticipation❤❤❤
Thanks so much for the encouragement!!! I know this one will be interesting but it will just make the final product so much more meaningful! Happy New Years to you as well!🎉🎉🎉
It’s actually insane the previous owner seen his old car on yt. That’s cool! So far so good it seems like the only water damage was the electrical and not engine or transmission. 👍 🤞
BOY!!! If you got this thing at $2900 and it indeed has no water in the block or any water damage in the block itself you really came out with a STEAL! Coming from someone that hydrolocked his 6.1 this past June it's looking pretty promising. Oil looked solid. Plugs looked solid. I can't wait to see the next upload.
Thanks for the forecast! I have a quick question: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?
Love it. Great work so far. Please consider raising the car by an inch or so. Personal opinion, but it looks too low to me. Hopefully it starts up just fine!
Hey... not subscribed, but i would definitely look at unbolting all of the ground wires in your trunk and cleaning them up. I see rust, and that could affect your connection for ground. Good grab, i have to say. Nice looking car!
Looks good so far. Check the grounds leading into the cabin for corrosion. Definitely make sure to get the new fuse box on correctly, these can be very annoying. Can’t wait to see the pursuit mods
Depending on how deep you want to get into it, I’d replace the cam, lifters and timing chain but it really depends on if it was abused in the past. Mine recently hit 300,000 miles and still going strong
Thanks for the input!! Those definitely would be some great things to just take care of. That’s so awesome to hear about yours!!! What motor does your have?
You can rotate the engine at the crank with a breaker bar and socket since you already have the plugs out. If it doesn't rotate the engine is locked up. If the engine does rotate and water is present enjoy the show. Clean all those ground points in the trunk and replace bolts. Replace 12v battery while replacing rear fuse box. After replacing the fuse box and the doors unlock and cluster/gauges turn on you should be in good hands. Do not say body harness!
6:43 - In the future remove the spark plugs first, spray fogging oil in the cylinders, then try to turn the engine over by hand. That will tell you quickly if the engine is locked up before going further. 12:12 - that rear fuse box doesn't have a harness plug? That sucks if you have to pin that whole thing. Hopefully no corrosion wicked up into the wires. Good job so far, I'm rooting for ya! 🏆😎💪
Awesome ABC《☆》Y'all got the MIDAS touch with these Auction cars👍🏾🍔🤳Lots of great suggestions in the comments. The only other thing I can think of is with it being an 08 model is having the older problematic Cylinder heads unless they've been upgraded. I think the newer Eagle HEMI heads were introduced later like around 2014. Good Luck guys✌🏼😎☯️🏄♂️🏄♀️❄🌲❄
Yep I’m actually probably going to buy an entire used 300c😄 I can get a solid one with trans issues for $800. I saw all the wiring harnesses are the same for all trims
WD40 is your greatest friend. Believe it or not it works wonders with electrical parts. I work as a heavy equipment mechanic and a lot of our equipment deals with rust and corrosion especially our scissor lifts. Not 100% sure how long that rear fuse box was under water but as long as it wasn't too long you hopefully will be ok soaking everything in wd40. The fuses and box you can easily replace, you don't want the corrosion eating its way into the wiring, that's when the problems with power distribution occur. Soak it heavily in WD now while you wait on the box and fuses to arrive that way it should prevent any further rust penetrating into your harness. 👍 The fluid in rear diff & bore scoping the cylinders like others mentioned are great ideas.
Man you are awesome thanks so much for the advice and input!! I swear I learn more from y’all than anywhere else haha. I’ll get that WD soaking now while we wait, and yep I’m planning on changing that rear dif fluid too!! 🙌🙌
Letsss go we appreciate you Darryl! 🔥she’s a beauty!! Let’s keep the content coming ABC! I’m still in love with the pursuit but I’m excited for this 300! 🙌❤️
Yup pretty much. If it doesn’t have power they’ll just mark it as mechanical unless there are very clear signs and history of something else like flood damage
I sure wish we could too, these projects always have hidden surprises. At the end of every build series we will make a full length 1 hour video of the full process🙌
@Atlanticbeachcustoms better safe than sorry I've tried to warn a couple of people in the past & they choose not to listen one of them was set back a few dollars as a result also I just found your channel & your doing amazing great to see father & son taking pride in hard work with such passion ya don't see much of that anymore it is the recipe for success I can only imagine how much the channel will grow over the next year or 2 God bless happy holidays
@@marksullivan8200Dang yeah better safe than sorry for sure. Thank you so much for support and encouragement, I’m glad you’ve been enjoying the videos! My dad and I left our jobs recently to pursue this passion and have been having a blast, we couldn’t do this without you!🙏
I hope you keep the red color and not wrapping the car. 392 swap it. That motor doesn’t have that much life left. They are notorious for dropping value seats. Starlight roof, carbon fiber front lip and rear diffuser, new screen, exhaust Borla or Corsa, fix the front bumper paint, new tires keep the rims, new steering wheel. I’m sure whatever you do it will be great. Definitely 392 swap! 😂
Thanks bro!! I know the red is super clean, I’ve got a super cool wrap planned but we will be rocking the red for a while! Can’t wait to show you what all we’ve got planned😄😄
Here for that discount code lmao getting my orders in manismith much love brother seriously I don’t care if I win or not you really are the goat and I hope you know right now mark my word your going to be a huge car content TH-camr. You seem honest and genuine ❤
You are the goat! Thanks so much for watching and for the amazing comment, it made my day! I’m super grateful and lucky to have such awesome viewers that help motivate us to keep going!🫶🙏
@ most definitely brother im trying my hand at youtube with my tech channel i just need to stay consistent. but we appreciate you my brother, ill be looking for the next one
That’s actually so clutch you got that info before you tried to start it. Fluids look good but always good to replace those in case
I know right!!! Darryl came in so clutch!🙏
Borescope the cylinders. No rust, and you're golden.
Okay awesome will do, thanks for the input!!🙌🙌
Nice find! Lowest connection that i remember is the heated seat control module under passenger seat mine was fried after a flood wouldn't let the car start because of the CAN connection. No other connectors under carpet.
Thanks!
Wow thank you so much!!! I seriously can’t thank you enough for all your support from the beginning. I won’t ever forget you!🙌🤝
I wish you the best.. I’m trying to support as much I can.. you deserve it.
@@omarkurdi9008 Thank you so much!😄😄😄😄
Definitely great idea putting new coil packs their good for about 75k & then they start to go one by one putting new packs in very good idea also empty the gas tank put new fuel filters better to be safe than sorry
Absolutely!! Thanks so much for the info I’ll get working on those🙌
I also can’t wait for that charger performance video 🤣 I need it already!!!
Next week!!!🤞🤞🤞
Looking forward to this, as I have one. My Suggestions are Clean out fuel tank. New headlights. Front splitter. Paint calipers. Wickerbill spoiler. Rear window spoiler - the most aggressive is the Duraflex Brizio one for the later model, so needs customising. Rear diffuser. Exhaust with big tips. New hood. Starlight headliner. Coloured seatbelts. New stereo. Android Tv screens in head rests. Plus a Whipple supercharger to really draw in the viewers. Loads to mess around with. 👍
Thanks so much for watching and for the comment! Really appreciate all those great ideas & advice, I’ll be looking into everything!!! Stay tuned my friend😄😄
Been waiting to see this one pop up lol
Can’t tell you how much I appreciate the support🙌🙌🫶🫶
@@Atlanticbeachcustoms absolutely!
Excited for this one too !!!!! cannot wait for the Giveaway winner to be announced!!
So glad you’re excited, this one will be fun!! I know I can’t believe the charger giveaway is in less than a month now!!!
supporting still! i needa more 5.7 content pleaseee
Yessir these next 2 weeks are going to be PACKED with Charger content!😄😄
@@Atlanticbeachcustoms thank you !
Nooo more 6.1
@@freeboydebo14Hahah don’t worry we’ve got tons of 6.1 content coming. We’re coming up on the end of our Charger series and then we will be focusing on this build💪 Lots in store👀👀
Notification Squad 🔥🔥💯💯
Love my Noti squad!!! Send me an email to atlanticbeachcustoms@gmail.com so I can send some stickers out for ya😄🤙
Check for corrosion on the wires , if you do find some trace it back till you see clean copper, cut and splice in a new wire!
Thank you!!! Really appreciate the input, we’ll start looking through those wires🙌🙌
I gotta say I love this type of content finding a car at the auction and fixing and giving it to fans is crazy and so generous keep up the great work guys 🚘💯
Congrats bro on the 15k subs I remember you had 3k 🎉🎉🎉 and hopefully not to many issues on this car too
Man thank you SO much!!! Couldn’t be doing this without you, so glad you’ve been here since the start! Won’t ever forget you🫡😄
New upload! I get stoked every time you guys put out content! A part of me is sad that the charger series is coming to an end and the other is happy because we get to see the winner!! The charger series will always be a classic👌🏻 Exited for the 300 content though! Keep it up ABC!! God bless y’all brother 🙏🏻
Dude you’re the best! I’m right there with you, I’m super sad our charger build is coming to an end up super excited to get going with this 300! We couldn’t be doing this without you, thanks so much for all your support!!🙏🙏🙏
next you should remove the back seats and check the fuel and the pump if any sign of water got into there and check the wirings especially through the door or any low spots if it has carbon built up or rust, wish all you the best and keep up the good work and good luck.
Water damage does not look too bad. Good luck👍
Hoping so!! Thanks for the support Michael!🙏🙏
Was definitely best to go over & check/change everything!
My 17 392 was flood as well and the rear fuse box was fried and had to be completely replaced along with new relays, it was fine afterwards.
For whatever reason I’m thinking this SRT8 will end up being even better than the infamous RT Pursuit WB 🔥🔥🔥
Oh wow, flood damage can be scary. Looks like you might have gotten lucky here, as the damage doesn’t seem too bad. The corrosion on the underside might need a closer look, but it doesn’t look like a deal breaker. The fluids looked great when you drained them, with no metallic bits (*whew*). The harness definitely needs inspecting, and make sure you get a look under the carpets and check the HVAC for mold (notice any funny smells?) So unbelievably cool the previous owner saw the video and reached out! If you make shirts/merch for this car, definitely send him one! How funny would it be if he won it back? 😂 This is going to be a fun build. Maybe do a Challenger at some point in the near future, as the MOPAR crowd are already paying attention. Enjoying watching your channel blow up! Have a safe and happy NYE!
If the new fuse box don’t work try pcm
Will do thanks man!!🙏
Gotta work ona 2013 camro
Yes I’d love to get a Camaro build going on the channel in the future!🙌
You got the oil and trans fluids but don't forget the rear diff. Idk about mopars but many diffs are vented so it could be filled with water. Drive it like that and it'll be done.
Ahhhh thanks so much for the comment!! I’ll get that replaced too, anything else fluid wise I should look into changing before starting it up?
@ I love this series and the Pursuit as well. Glad I found your channel I’ve been here since the start. That said, admittedly I’m not a mopar guy but other than the diff, I can’t think of any. You’ll flush the brake fluid as part of your routine maintenance. I just didn’t wanna see you guys accidentally cook that (I suppose) limited slip diff driving it full of water. Keep doing what you guys are doing, great channel. You’re gonna blow up!
@@brandonbman5921So glad you found it too, seriously can’t thank you enough for the support and encouragement!! We couldn’t be doing this without you, thanks again for the watch and your comments😄😄😄
Great video. You really did find a hidden gem 🔥 and very cool that the previous owner reached out to you to let you know what might be wrong with it. Looking forward to more videos 😊
Thank you so much as always Raven!!! Can’t wait to get this thing driving again and show you all what we have planned!😄😄
If your car doesn’t start after you replaced the rear fuse box you will probably have a blown fusible link, my 06 300c srt8 had a short and i was going crazy, replaced battery, alternator, pcm, starter and it didn’t want to start, and ended up that the fusible link wire at the bottom harness by alternator was toasted. Replaced and car started right away.
Wow thank you so much for the input!! We have been sitting here thinking about next steps if the new fuse box doesn’t work so I really appreciate your insight here. I’ll look into that for sure!!🙌🙌🙌
@@Atlanticbeachcustoms you welcome brother, can’t wait for the next video
Also what’s the song at 7:05 ?
Made it myself lol, I make all my own music in these videos so I don’t have to worry about copyright & stuff
@@Atlanticbeachcustomsdang, seems I’m not the only one who thought the beats were awesome😂
@@hazed2513Hahah I think I just saw another comment about the songs in this video too😂 Glad y’all like the songs!
@@Atlanticbeachcustoms Sounds like that idea of dropping beats may come in handy xD
Cant wait ti see this build🤗
Thanks for being here and supporting! This will be a fun one, just need to get it running first😄😄
@@Atlanticbeachcustomsyesir i am here for it and the build and to support if i dont win it i will continue to support i belive you will build this thing and get it back running on the road where it should be
@@Chuckyy_209Thanks!! Yep we will get it back up in no time🙌🙌
Love this car & series already
LESSGO!
the plugs from the harness that go into fuse box or the whole harness
We all need more videos of the 6.1 hemi
Got LOTS coming!!!
Darryl should enter the giveaway for this bad larry. Imagine if he won... that'd be crazy
Hahaha I know I should tell him to enter! That really would be the craziest thing ever, I still can’t believe he found this😂😂
Nice Project I've been trying to get my hands on a Chrysler 300C, but they are rare in good conditions with the big HEMI engine. At least Here in Germany. Much Love and anticipation❤❤❤
Hello my friend!! Oh wow yeah I bet they are hard to find there, which is wild because you see a dozen every day here😄 Good luck with your search!
Dude, you should give the car back to him, that would be an awesome episode!
That would be so cool!!!
Love the build, dude. This one looks like it will be tough, but you guys got this! Happy New Year, brother.
Thanks so much for the encouragement!!! I know this one will be interesting but it will just make the final product so much more meaningful! Happy New Years to you as well!🎉🎉🎉
It’s actually insane the previous owner seen his old car on yt. That’s cool! So far so good it seems like the only water damage was the electrical and not engine or transmission. 👍 🤞
Beautiful car! 1 of my all time favorite srt8's. Great video.
BOY!!! If you got this thing at $2900 and it indeed has no water in the block or any water damage in the block itself you really came out with a STEAL! Coming from someone that hydrolocked his 6.1 this past June it's looking pretty promising. Oil looked solid. Plugs looked solid. I can't wait to see the next upload.
i get so excited when i see these videos pop up 😂
& I get so excited when I see comments like yours pop up😁😂 Thanks so much for the support, glad you enjoy the vids!!🙏🙏
Whaddup love watching this dude fr
Man I appreciate that sm! Have a good weekend over there bro🙌
Love this video!! Excited to see you get this beast back up and running 🔥
Thanks so much man, this project is gonna be a ton of fun! 😁😁
Thanks for the forecast! I have a quick question: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?
I’ve got no clue sorry😂
Love it. Great work so far. Please consider raising the car by an inch or so. Personal opinion, but it looks too low to me. Hopefully it starts up just fine!
Thanks!!! Yep I will prob be raising it here soon, it’s sooooo low
Hey... not subscribed, but i would definitely look at unbolting all of the ground wires in your trunk and cleaning them up. I see rust, and that could affect your connection for ground. Good grab, i have to say. Nice looking car!
Looks good so far. Check the grounds leading into the cabin for corrosion. Definitely make sure to get the new fuse box on correctly, these can be very annoying. Can’t wait to see the pursuit mods
Thanks for the info and advice! I’ll check all of those and make sure we get that fuse box situated correctly. Let’s get this thing running!!
Nice Vehicle!!!!!!!!! Flooded? This is going to be a wonderful video!!! Nice!!!!!!!🔥🔥🔥🔥🔥🔥🔥
Depending on how deep you want to get into it, I’d replace the cam, lifters and timing chain but it really depends on if it was abused in the past. Mine recently hit 300,000 miles and still going strong
Thanks for the input!! Those definitely would be some great things to just take care of. That’s so awesome to hear about yours!!! What motor does your have?
Looked forward to that video man, happy holidays everyone keep at it 💪💪
Thanks so much brother!! Happy holidays to you as well, excited for what we’ve got in store for 2025!🙌
You can rotate the engine at the crank with a breaker bar and socket since you already have the plugs out. If it doesn't rotate the engine is locked up. If the engine does rotate and water is present enjoy the show. Clean all those ground points in the trunk and replace bolts. Replace 12v battery while replacing rear fuse box. After replacing the fuse box and the doors unlock and cluster/gauges turn on you should be in good hands. Do not say body harness!
Awesome thanks for the info!!! I’ll try that out, fingers crossed once we get the new fuse box/fuses and battery in we get power🤞😫
Very clean 🧼… can’t wait to hear it running 🔥🔥🔥❤️💪🏽300GANG🙌🏽FAM🫡
Thanks!! I know I’m dying to get her up and running and out on the streets😁😫
Please check the rear differential fluid as well. Also the tire pressure sensors.
Yes thank you!!!
6:43 - In the future remove the spark plugs first, spray fogging oil in the cylinders, then try to turn the engine over by hand. That will tell you quickly if the engine is locked up before going further.
12:12 - that rear fuse box doesn't have a harness plug? That sucks if you have to pin that whole thing. Hopefully no corrosion wicked up into the wires. Good job so far, I'm rooting for ya! 🏆😎💪
Awesome thanks so much for the advice, I’ll do that next time!! & yeah sadly there isn’t any nice harness plug anywhere so we have to remove it all😫
Thanks for the support!!🙏🙏
Hope I win the Chrysler or the pursuit
Hoping for you too! Crazy the Charger drawing is in under a month!!!
You can have the pursuit I want this Chrysler so bad 😂 my dream car
Sick car! Excited to see where this goes 🤟💪👍👍👍
Change body harness it’s not hard at all I had to do it on my 2006 Chrysler 300c
Awesome ABC《☆》Y'all got the MIDAS touch with these Auction cars👍🏾🍔🤳Lots of great suggestions in the comments. The only other thing I can think of is with it being an 08 model is having the older problematic Cylinder heads unless they've been upgraded. I think the newer Eagle HEMI heads were introduced later like around 2014. Good Luck guys✌🏼😎☯️🏄♂️🏄♀️❄🌲❄
Hahah thanks friend! Tons of great suggestions, yall are awesome!! Good to know on the cylinder heads, thanks I’ll check those out!!🙌🙌
LOOKING AMAZING SO CAN'T WAIT ✨️🫡✨️
I love this channel
Dude you rock! Seriously can’t thank you enough for all your support🥹🙏
Still supporting!!! This video was awesome🔥🔥
You’re one of the OGs I’ll never forget!! Thanks so much for all your continued support with all our videos, you are AWESOME🙌🙌🙌
Just entered for the Chrysler 300, been trying to get one for about 4 years now, wish me luck on this one.🤞🏽🤞🏽
Let’s gooo that’d be so awesome if you just won this one!! Wishing you the best of luck🙏🙏
@ Thank you nd your team for the opportunity to win my dream car🙏
Prob should start looking for a used wiring harness. That one’s toast. 👍
Yep I’m actually probably going to buy an entire used 300c😄 I can get a solid one with trans issues for $800. I saw all the wiring harnesses are the same for all trims
WD40 is your greatest friend. Believe it or not it works wonders with electrical parts.
I work as a heavy equipment mechanic and a lot of our equipment deals with rust and corrosion especially our scissor lifts. Not 100% sure how long that rear fuse box was under water but as long as it wasn't too long you hopefully will be ok soaking everything in wd40. The fuses and box you can easily replace, you don't want the corrosion eating its way into the wiring, that's when the problems with power distribution occur. Soak it heavily in WD now while you wait on the box and fuses to arrive that way it should prevent any further rust penetrating into your harness. 👍
The fluid in rear diff & bore scoping the cylinders like others mentioned are great ideas.
Man you are awesome thanks so much for the advice and input!! I swear I learn more from y’all than anywhere else haha. I’ll get that WD soaking now while we wait, and yep I’m planning on changing that rear dif fluid too!! 🙌🙌
Great work it's going to start 💯👌
Thanks so much for the watch and encouragement! We will get this beast up and running here soon!!🙌🙌
Why is the audio recording not in Bulgarian?
Looking forward to this build
What’s up Tim?! So glad to hear that, have a great weekend ahead over there!🙌🙌
The 6.1…so much potential
There really is so much potential!!
Looks hella good can’t wait to see how it comes out. 😎
Thanks for the support! This build is gonna be fun! 😁
I’m in Florida and have that fuse box from an identical car 07 300srt that I bought wrecked for the 6.1
For sale?
@ where you located, only thing is I cut it from the harness so you would have to solder all the wires but honestly you can have it lol
wow nice car bro may be one day i will have one
It's definitely a dream car, I'm glad you like it! 😎
Take your door panels off to see where the water level got to. I’m pretty sure they didn’t do that when they cleaned the car
Trueeee smart idea I’ll do that! Thanks🙌
Letsss go we appreciate you Darryl! 🔥she’s a beauty!! Let’s keep the content coming ABC! I’m still in love with the pursuit but I’m excited for this 300! 🙌❤️
Thanks brother!!! I know Darryl came in so clutch!! Can’t wait to get out pursuit content out👀👀😄😄😄
So really if the auction listings marks it as "mechanical" that could be really mean anything?
Yup pretty much. If it doesn’t have power they’ll just mark it as mechanical unless there are very clear signs and history of something else like flood damage
Good question
Too bad it has that flood damage. Hopefully the electrical issues can be resolved without much more effort.
Yeah hopefully so!🤞
What would be nice is fixing a problem from start to finish in 1 video. Like VGG 1 long video.
I sure wish we could too, these projects always have hidden surprises. At the end of every build series we will make a full length 1 hour video of the full process🙌
Good luck nice car
Thanks, man! I appreciate it!
cant wait for this content🔥
Thanks for being here!💪💪🙏🙏
Discount code isn't working brotha
Was a limited time promo! We’ll be getting another one running here soon to celebrate our charger performance mods tho so stay tuned🙌
@@Atlanticbeachcustoms would it work for the 300 when yall run the new one?
Noti Gang
👏🙏🙏🙏🙌🙌
16 spark plugs is insane
change the diff oil
Yes will do thanks!!🙏
I could tell it was flooded in the first video because of that clip of the seats I noticed oxidation on the seat rails
Good eyes!! You knew it😄🙌
Love to watch your videos while being high af
Ayyyy right on!😮💨🤙 Appreciate the watch & support🙌🙌
Drop the tank empty out the old gas it's likely turned to varnish & I wouldn't run bad & or contaminated fuel through that motor
Super good idea I will definitely do that before we try to run it! Thanks for the tip🤝
@Atlanticbeachcustoms better safe than sorry I've tried to warn a couple of people in the past & they choose not to listen one of them was set back a few dollars as a result also I just found your channel & your doing amazing great to see father & son taking pride in hard work with such passion ya don't see much of that anymore it is the recipe for success I can only imagine how much the channel will grow over the next year or 2 God bless happy holidays
@@marksullivan8200Dang yeah better safe than sorry for sure. Thank you so much for support and encouragement, I’m glad you’ve been enjoying the videos! My dad and I left our jobs recently to pursue this passion and have been having a blast, we couldn’t do this without you!🙏
Song at 5:30 and 9:38???
They’re songs I make myself actually haha. I make my own music to use in my videos so I don’t have to worry about copyright & stuff
@ send the link to them two songs bro
Good luck guys 🎄🎉🎉😊
Thanks friend!!😄
I hope you keep the red color and not wrapping the car. 392 swap it. That motor doesn’t have that much life left. They are notorious for dropping value seats. Starlight roof, carbon fiber front lip and rear diffuser, new screen, exhaust Borla or Corsa, fix the front bumper paint, new tires keep the rims, new steering wheel. I’m sure whatever you do it will be great. Definitely 392 swap! 😂
Thanks bro!! I know the red is super clean, I’ve got a super cool wrap planned but we will be rocking the red for a while! Can’t wait to show you what all we’ve got planned😄😄
Here for that discount code lmao getting my orders in manismith much love brother seriously I don’t care if I win or not you really are the goat and I hope you know right now mark my word your going to be a huge car content TH-camr.
You seem honest and genuine ❤
You are the goat! Thanks so much for watching and for the amazing comment, it made my day! I’m super grateful and lucky to have such awesome viewers that help motivate us to keep going!🫶🙏
@ most definitely brother im trying my hand at youtube with my tech channel i just need to stay consistent.
but we appreciate you my brother, ill be looking for the next one
need to coat that trunk to keep the rust from spreading
Yes thank you!! Any suggestions on what to use to coat it?
@@Atlanticbeachcustoms amzoil MP HD
@@Atlanticbeachcustoms AMSOIL Heavy-Duty Metal Protector
I Want Dat Charger 🍀
Deadline to enter is coming up in like 2 weeks!!! Crazy it’s almost time🙏
My good sir love your content I’m looking for a 06 dodge charger rt or one of those 300 can you help me obtain one please and thank you
Thanks for watching! Like from an auction?
@@Atlanticbeachcustoms yes sir for the 06 charger I would like to create a sleeper with a hellcat engine swap or the Chrysler 300 with the same idea
Were you hiding my Charger 😂😂
Huh what charger👀👀😂😂
FINALLYYYY
I might have to enter to win 👀
You should! You never know🤷♂️
If I win I’m going to go crazy lol. This is the first giveaway I’ve participated in.
Oh I don’t blame you!! I can only imagine that feeling of knowing your entry was drawn and you won…‼️‼️
Get a new harness
I think we will buy another cheap 300 so we can just replace any and all harnesses🙌
Nice
Thanks😄
🔥🔥
Appreciate you as always brother🙏
Here in zimbabwe 🇿🇼
Hello from across the 🌎! Thanks so much for watching!!😄😄
Earlyyy
Let’s goooooo!!! Have a great weekend over there🙌🙌
@@Atlanticbeachcustomsyou as well hope you have great holidays
@@Chuckyy_209Thanks you too!!!
Like someone said before, check them pistons the heads rods
Will do, appreciate the input!🙌