🎶 track? It’s *I Am Nothing* by *Heyson* - and yes we are THRILLED to be your trusted provider. th-cam.com/video/mdMdA89RDgU/w-d-xo.html // Epidemic Sound
Thanks a lot! We try our best.. and tbh.. shooting the B-roll is my fav. part!! Hope we can impress you again in the next video(s).. Working on many many vids for july!
Thanks so much! Matt does make great videos as well! For asthetic reasons we went with the Montech RX120 Fans throughout the whole Build! And thanks for watching ☺
I use SignalRGB to sync up everything. (Basically i try to connect all parts to the Motherboard via ARGB Headers and than create profiles in the Signal RGB Software! Glad you liked the video and thanks for watching!
@@TekTherapyhi ! I don't understand it. Did you daisy chain the rgb headers to 1 rgb header on the mb? Or did you use the included rgb/fan hub from montech and connected the data cable to data power and then download rgb fusion?
@@reactionswithmike Hi Mike! I daisy chained all fans (maximum three fans per ARGB Port) on the ARGB/PWM Controller that´s integrated in the case. And than connected the ARGB/PWM Cables from the controller to a dedicated ARGB / PWM Header on the Motherboard. For the AIO i used a separate ARGB Header / AIO PWM Port on the Mobo. After that i use SignalRGB to sync everything up and create a theme/profile. Hope that helps!
que vídeo FANTÁSTICO! Parabéns. uma dúvida: caso eu queira adicionar fans na parte superior, eu devo compra-las na versão normal ou reversas? Obrigado!
Muchas gracias :-) ¡Me alegra que te guste el vídeo! Yo usaría esta configuración: Atrás/Arriba: Extractores. Lado/inferior: ventiladores inversos (ventiladores de entrada)
Hey! Sorry for the late reply, missed the comment. Under load around CPU temps 65-67 deg. Idle 27-28 deg. on average (celsius). GPU Idle 23-25deg - Load 63deg. 20 Minute load test.
What did you manage to get all 4 dims of ram running at? Its supposed to be pretty difficult on ryzen. Ive had the exact same cpu and board and been too scared to go near 4 dims 😅
Hey! Honestly i had less problems getting 4 Ram Sticks running on AM5 Boards than on Z790 Boards. But just my personal experience. But running them at full speed is another story. But in that case i was able to run them around 6400 Speeds back than.
Almost certain! 6000mhz shouldn´t be a problem at all. I had multiple sticks from Teamgroup and Crucial running at that speeds in different Boards from ASUS and ASRock over the last two years! Glad i can help!
I appreciate feedback. But the whole concept of the vids will not work. Newer videos are more level on the sounds. But we will not remove the music because it is essential for pacing.
If you have the same 7900xt.. it will fit easily. You could fit even a bigger GPU. Even if you use the vertical GPU mount! Are you certain you have exactly the same parts!
This deserves more views, great channel! Great Videos!
Thx a lot much appreciated!
The video quality is a standout. I can tell that you guys put a lot of effort into ensuring a visually pleasing video.
Envy of that white build. Really nice part selection for an AMD build.
Came out nice didn´t it? We tried to put a nice theme together in this one!
Love the screwing noises in the build process
It´s our fav part of making the videos ;-)
Thank you for the awesome PC assembly video ^^
Thx for watching!
Спасибо вам за прекрасный обзор, вы крутые!!!
Спасибо за просмотр!
Just discovered you channel, every video is far above others in my opinion
Thx a lot Denny!
You guys make it seem so easy everytime
Love this build so much. This is my dream. The case looks so nice🤩
Thx a lot Nelson! Glad you like it!!!
🎶 track? It’s *I Am Nothing* by *Heyson* - and yes we are THRILLED to be your trusted provider.
th-cam.com/video/mdMdA89RDgU/w-d-xo.html
// Epidemic Sound
Thx for all the epic tracks!!!! 🙌
I love your video. The quality, lights, camera pan and styling, everything. Just outstanding! ❤
Thanks Raul! Really really appreciated it! We try our best!
Such a nice looking case!
Agreed!!! Thx for watching
The B-roll is absolutely stunning
Thanks a lot! We try our best.. and tbh.. shooting the B-roll is my fav. part!! Hope we can impress you again in the next video(s).. Working on many many vids for july!
I recently came across your channel. What you do is super unique, i am really impressed of all your videos!
Thanks a lot!
What a beaultiful build, congrats.
Thx a lot!!! Glad you like the build and thanks for watching!
Super nice build guys! Greeting from eBay Germany haha
Thx a lot man!!!!
Actually didn´t know NZXT had motherboards. But it did looked good visually in that build!
They have been doing mobo´s for a long time actually. Mostly 2 Boards per platform AMD/Intel (B650/Z790 etc.)
04:08 AUCH!
Awesome video. I love the King95 case. In fact, I want to buy one for my next build
One of my fav cases as well!!! Glad you liked the video man!!
This inspires me to build one!
Oh thanks a lot.. that just motivates us to do more content!!
Wow! Impressive build and video edition! Reminds me of Mr Matt Lee (another champion). Which fans are you using on the Deepcool AIO?
Thanks so much! Matt does make great videos as well!
For asthetic reasons we went with the Montech RX120 Fans throughout the whole Build! And thanks for watching ☺
RTX GPUs are cool and all, but always refreshing to see some Radeon
100% agree ☺ Thx for the comment
Hey, nice video.
I hope you dont mind if i ask, but how do you control the rgb of the fans?
I use SignalRGB to sync up everything. (Basically i try to connect all parts to the Motherboard via ARGB Headers and than create profiles in the Signal RGB Software!
Glad you liked the video and thanks for watching!
@@TekTherapy ty
Anytime 🙌@@ExeLBozo
@@TekTherapyhi ! I don't understand it. Did you daisy chain the rgb headers to 1 rgb header on the mb? Or did you use the included rgb/fan hub from montech and connected the data cable to data power and then download rgb fusion?
@@reactionswithmike Hi Mike! I daisy chained all fans (maximum three fans per ARGB Port) on the ARGB/PWM Controller that´s integrated in the case. And than connected the ARGB/PWM Cables from the controller to a dedicated ARGB / PWM Header on the Motherboard. For the AIO i used a separate ARGB Header / AIO PWM Port on the Mobo. After that i use SignalRGB to sync everything up and create a theme/profile. Hope that helps!
que vídeo FANTÁSTICO! Parabéns.
uma dúvida: caso eu queira adicionar fans na parte superior, eu devo compra-las na versão normal ou reversas? Obrigado!
Muchas gracias :-) ¡Me alegra que te guste el vídeo!
Yo usaría esta configuración: Atrás/Arriba: Extractores. Lado/inferior: ventiladores inversos (ventiladores de entrada)
7200MHz in with the AMD Ryzen 7 7800x3D 👀
We chose because it fit the build just nicely.. and we "only" had the 7200Mhz White Rams around at that point. Thx for watching!
i wanted to ask if u changed the fans when installing the aio
Hi thanks for watching! Yes we changed the original Deepcool Fans to the AX120 PWM Fans to fit the theme of the Build!
I removed the unused hard drive bin, mounted my psu at the top, and gained even more room for cables.
I actually did the same on the build since it was so great for cable management!
What are the temps in this case?
Hey!
Sorry for the late reply, missed the comment. Under load around CPU temps 65-67 deg. Idle 27-28 deg. on average (celsius). GPU Idle 23-25deg - Load 63deg.
20 Minute load test.
Hey your ssd was black 😠 jk awesome build. The motherboard looks incredible!
But but but.. It´s hidden ;-) I´ll try to find a white NVME SSD some day!!! Thx for the comment and watching!
Montech 95 pro or Antec c5??
Both solid choices. But i did get slightly lower temps on the King95!
@@TekTherapy Thanks !!
@@kush252 Anytime!
What did you manage to get all 4 dims of ram running at? Its supposed to be pretty difficult on ryzen. Ive had the exact same cpu and board and been too scared to go near 4 dims 😅
Hey! Honestly i had less problems getting 4 Ram Sticks running on AM5 Boards than on Z790 Boards. But just my personal experience. But running them at full speed is another story. But in that case i was able to run them around 6400 Speeds back than.
@TekTherapy thank you! So do you thing running 4 dims at 6000 cl30 would be likely to work without much hassle?
Almost certain! 6000mhz shouldn´t be a problem at all. I had multiple sticks from Teamgroup and Crucial running at that speeds in different Boards from ASUS and ASRock over the last two years! Glad i can help!
How much is the pc ?
Will be around 2000 USD
Shut up and take my money.
😀🙌
Take the music off kills so many videos
I appreciate feedback. But the whole concept of the vids will not work. Newer videos are more level on the sounds. But we will not remove the music because it is essential for pacing.
I just bought this exact build. I wonder why i cant fit the GPU? 🤔
If you have the same 7900xt.. it will fit easily. You could fit even a bigger GPU. Even if you use the vertical GPU mount! Are you certain you have exactly the same parts!