I do like the Japanese carpentry I must admit, the self-closing joints they make are something else. They're some thin auld shavings there, they'll make your cabinet scraper embarassed to be a cabinet scraper, I reckon they'd be sound as a sort of woodsman's Rizla as well
My grandfather was a carpenter and I spent all my childhood and early teenage years working wood with him. He taught me everything about tools and how to sharpen them and maintain them in the best conditions. I just discovered your videos and I can't stop watching them. It brings me so much joy and beautiful memories of the amazing time I spent with my grandfather. I had forgotten how much I love the smell of those wood shavings! Can't wait to watch your next video. Thank you for sharing, Eoin 🤗
Planes used to be ridicously common. I've got like 10 very usable old wooden planes for 10€ each. They just needed a bit of sharpening and a flat sole again 👍
Watching so many Japanese joinery videos was what got me into watching all these woodworking TH-cams. There are those annual shavings competitions in Japan but there is also one in the US, just north of Berkeley, Calif. (east across the bay from San Francisco). Lovely stuff. There is just something mesmerizing about watching an expert with his chisels and the joints they make. Great video.
I have a bunch of old planes box up when we moved. Can't wait to get my barn built so I can get my work shop back. Learned a lot from you. Thanks you can always teach an old dog new tricks (67).
Joiner from Germany here, we will set our planes differently from this method. We glance along the bottom of the plane and eyeball how far it sticks out, then you hit the blade until it is even and sticking out just right. It takes a while to get the hang of but since most planes are made from wood here around you have to set them every time you use them. Becomes second nature real quick and it takes mere seconds after a while. I prefer wood planes because they are much lighter than steel ones and when running a plane along a piece of wood a couple hundred times a day, that adds up quickly. As a bonus you can run maintainance on them in your wood working shop.
I was watching "the carpenter life" he is an American in Japan learning traditional carpentry. And visited the craftsman making plane blades and plane bodies. It was interesting to see two different craftsmen working on a plane. But they both leave the last bit of adjustment on the plane for the user to dial in for use. There is a micro plane and cabinet scraper they use for adjusting the sole of the wooden body. But I've never seen the Japanese to oil the wood body just the blades.They like the dry wood body to glide over.
I have one of those, thanks for your detailed explanation on setting it up. I've got another for shaving bonito "Katsuo" fillet blocks that are hard as wood. Your sharpening explanation will hopefully help me get good shavings from that instead of dust. Cheers!
Your videos are so interesting and relaxing. I get so inspired after to fix broken things in my house, even just mend clothes or pick watercolour over digital art. Keep it up!!
I just stumbled across your channel, and am so happy I did. Your work reminds me of working with my grandpa on the farm in 1980. Thank you Eoin for sharing your skills.
The more you play with it, the easier it is to set. I have an antique western wooden plane that I can set up in seconds to take super thin shavings. And I’m a complete amateur. It’s a ton of fun!
I have a plane (the normal metal kind) kicking around, I've never mastered how to use it properly... you've inspired me to dust it off and have another go!
I got my caprtenty and joinery qualifications as a young man but ended up as a chef because of, life. I don't want to go off to commercial woodworking but you are absolutely reopening a passion I had as a child/young man, I have very few tools and it is quite difficult to come across (decent) old hand tools as I've discovered as I look for them second/third/fifth hand, as there's no way I could ever afford even basic tools new, but I'm slowly trying to build enough of a collection to be able to do some actual wood work again! ::) I love the longer form videos and thank you so much for reawakening an old passion, I don't like power tools but you have reminded me that I don't HAVE to use them, I can truly build with my hands... once I can finally get some proper tools, I can't make much with a rust based, snapped hand saw, a snapped hammer, no materials and a leather punch.... but one day, so again, thank you friend, from New Zealand ::)
I'm in the same boat. It can be really tough to work up from nothing with no capital. I've found Rex Krueger's series, "woodwork for humans" to be pretty helpful and inspiring. I know its not kosh to talk about other channels but I think this is an educational/inspirational community, so I hope no one minds.
You've stepped up your game with this vid Eoin! Great angles, properly mic'ed up, lovely lighting. I'll miss the cheeky phone being propped up, but I'm far more excited for what's to come. Please keep up the great work 🤙🏼
I love my Japanese plane! Working on the pull stroke is much easier on your back and shoulders and also allows you to work from a seated position instead of standing. Can be a great advantage for someone (like me) who is disabled.
It’s so wonderful how we came up with such simple technology yet it works so beautifully.. easy thing about this world is if it’s not broken, why bother fixing it! I love that you focus on hand tools, so entertaining and I really feel like I’m learning something valuable!!
I've been interested in Japan and Japanese traditional carpentry for years. I love the sound of a plane shaving that ribbon off the wood. I haven't tried Japanese planes but would love to get one. I've read they leave such a nice finish you don't need to do any sanding before finishing work. I'd love to get a good set of chisels from Japan. Love the look of them. Now I want to pull out what I do have and make something. Thanks for sharing your videos.
Love your videos lad! You could be an actor in movies or tv. It’s so much more logical to me to use the pull stroke than the push stroke in woodworking. I don’t own any Japanese planes currently but I do own a Japanese pull saw that I love.
I think what is more important is the finish left on the wood. I have seen a difference between my old Stanley and a more "modern" Lie Nielsen A2 blade which didn't quite give as good a finish to be honest.
The push plane you showed there, I picked one up the other day and used it for the first time last night. Took it apart to see how it worked, how the heck to I get it lined up well now? :D B&Q did me dirty with a good deal, but no instructions ^_^
Been a year, dunno if anyone told you this but dont seem anyone mentioned in these coments so, maybe not. There is a particular reason for that pulling technique which you can benefit. Their planing tables/set ups usually involve having the piece sloped down so that you can plane with a little help from gravity. The blocky nature can also help to use some techniques for pushing if you really need to where you equally de-emphasize where you distribute the power through your whole bother more evenly rather than emphasizing arm muscles (less tiring overall), while also using help from gravity and body weight, and/or skeletal strength too.
Needed this video about a month ago, bought a nice kanna about a year ago and was finally setting everything up. Got the job done in the end but it would have been helpful to have one more video to watch
It's worth remembering that a lot of Japanese tool technology can be explained by their relative lack of fuel and iron ore, leading to the need to economize on quality steel.
Just got shavings at 0.12 thou (3.05 micron) with an L-N 62 and an 01 steel blade sharpened to 0.3 micron lapping film and the stropped on untreated leather.
I'm a new sub and though your hard work does not go unnoticed, I'm sorry but I can't help but simp 😅 any ways, I adore your work (I'm a builder, not cabby). You put so much effort into everything, and effort shows in the finished product❤ Love from New Zealand 🇳🇿 Ps. Your sweater collection is wicked
Must not be much sunshine in Ireland. I'm Dutch and that's about as white as it gets, but I'm easily several shades darker. Get some sun, if you can; it is good for you! I kind of like the idea of pulling sharp instruments than pushing. Much safer, I'd wager.
you spoke of moisture potentially warping the wooden body of the plane, but would soaking the wooden body in something like varnish work to protect it from moisture? That way you'd only need to sand down the bottom a bit to your get it back to snuff again, perhaps rub a bit of oil on for good measure and it would be fairly well protected against moisture warping the body.
Love your videos. They always make me think if I should quit my software dev job and become a carpenter. One question though: where is that pullover from? It’s awesome
Juat to clarify, as far as i can tell the record is 3 microns (micrometers), which is actually 3 thousand nanometers. for reference if it was 3 nanometers, that would only be about 100 hydrogen atoms thick. You got to 25 micrometers thick with your final shave in the video, so the record is about a tenth the thickness
To adjust the sideways movement in case it's not parallel/even, Japanese masters hit the back corners of the body, rather than the steel. Usually you just sight it in, works quite well with a little practice.😊
Hello, I am curious if you sell any of your work. I'm getting into primitive camping and love your craftsmanship. With that being said I'm needing a good camp hatchet and would love to buy one from you
I wonder if there is an actual use for wood shavings like that? I mean they're paper thin so perhaps ltierally as paper? Good campfire kindling at least...
Can really see the improvement in this video. Full thumbnail nice angles framed well. You have come far in just a couple of months
Thank you so much. I really appreciate your comment,
@@EoinReardon yeah your quality has gone up nice to see you care about your audience
Eoin is a fast learner!
I do like the Japanese carpentry I must admit, the self-closing joints they make are something else. They're some thin auld shavings there, they'll make your cabinet scraper embarassed to be a cabinet scraper, I reckon they'd be sound as a sort of woodsman's Rizla as well
Glad to know I'm not the only one who thought the shavings looked like kingies
My grandfather was a carpenter and I spent all my childhood and early teenage years working wood with him. He taught me everything about tools and how to sharpen them and maintain them in the best conditions. I just discovered your videos and I can't stop watching them. It brings me so much joy and beautiful memories of the amazing time I spent with my grandfather. I had forgotten how much I love the smell of those wood shavings! Can't wait to watch your next video. Thank you for sharing, Eoin 🤗
You make me want to spend all my money on planes
That’d be the dream.
Thats the plane and simple choice here
Planes used to be ridicously common. I've got like 10 very usable old wooden planes for 10€ each. They just needed a bit of sharpening and a flat sole again 👍
Have done it and still doing it ever since watching Eoin. Already living paycheck to paycheck I might aswell have some good tools to have fun with
@@Layzieee ;;(99
Watching so many Japanese joinery videos was what got me into watching all these woodworking TH-cams. There are those annual shavings competitions in Japan but there is also one in the US, just north of Berkeley, Calif. (east across the bay from San Francisco). Lovely stuff. There is just something mesmerizing about watching an expert with his chisels and the joints they make. Great video.
I have a bunch of old planes box up when we moved. Can't wait to get my barn built so I can get my work shop back. Learned a lot from you. Thanks you can always teach an old dog new tricks (67).
The way he says "we" makes me feel like I'm working there alongside him.
Eion, thank you for your videos, so calming and relaxing watching and listening to you, keep up the good work ❤
Cheers.
Appreciate that big time
@@EoinReardon no, thank you 🙏 your videos are so good for my mental health!
Joiner from Germany here, we will set our planes differently from this method. We glance along the bottom of the plane and eyeball how far it sticks out, then you hit the blade until it is even and sticking out just right. It takes a while to get the hang of but since most planes are made from wood here around you have to set them every time you use them. Becomes second nature real quick and it takes mere seconds after a while. I prefer wood planes because they are much lighter than steel ones and when running a plane along a piece of wood a couple hundred times a day, that adds up quickly. As a bonus you can run maintainance on them in your wood working shop.
Kezurouki is the name of the competitions he's talking about with the wood shavings. It's crazy watching
I was watching "the carpenter life" he is an American in Japan learning traditional carpentry. And visited the craftsman making plane blades and plane bodies. It was interesting to see two different craftsmen working on a plane. But they both leave the last bit of adjustment on the plane for the user to dial in for use. There is a micro plane and cabinet scraper they use for adjusting the sole of the wooden body. But I've never seen the Japanese to oil the wood body just the blades.They like the dry wood body to glide over.
Man, iv been going through alot and honestly how calming you are and how enthusiastic you sound has really helped me get through things
Forget the chisels, get a nice set of Japanese pull or draw saws. Wonderful tools.
I love listening to him talk and I have no idea why
I have one of those, thanks for your detailed explanation on setting it up. I've got another for shaving bonito "Katsuo" fillet blocks that are hard as wood. Your sharpening explanation will hopefully help me get good shavings from that instead of dust. Cheers!
Your videos are so interesting and relaxing. I get so inspired after to fix broken things in my house, even just mend clothes or pick watercolour over digital art. Keep it up!!
I just stumbled across your channel, and am so happy I did. Your work reminds me of working with my grandpa on the farm in 1980. Thank you Eoin for sharing your skills.
Thank you for all the great videos! Loving these long form ones. Good luck with uni you can do it!
The more you play with it, the easier it is to set. I have an antique western wooden plane that I can set up in seconds to take super thin shavings. And I’m a complete amateur. It’s a ton of fun!
I have a plane (the normal metal kind) kicking around, I've never mastered how to use it properly... you've inspired me to dust it off and have another go!
I got my caprtenty and joinery qualifications as a young man but ended up as a chef because of, life. I don't want to go off to commercial woodworking but you are absolutely reopening a passion I had as a child/young man, I have very few tools and it is quite difficult to come across (decent) old hand tools as I've discovered as I look for them second/third/fifth hand, as there's no way I could ever afford even basic tools new, but I'm slowly trying to build enough of a collection to be able to do some actual wood work again! ::)
I love the longer form videos and thank you so much for reawakening an old passion, I don't like power tools but you have reminded me that I don't HAVE to use them, I can truly build with my hands... once I can finally get some proper tools, I can't make much with a rust based, snapped hand saw, a snapped hammer, no materials and a leather punch.... but one day, so again, thank you friend, from New Zealand ::)
I'm in the same boat. It can be really tough to work up from nothing with no capital. I've found Rex Krueger's series, "woodwork for humans" to be pretty helpful and inspiring. I know its not kosh to talk about other channels but I think this is an educational/inspirational community, so I hope no one minds.
@@ScottCalvinsClause I'm sure Noone will mind, thanks alot friend! I'll check it out ::)
You've stepped up your game with this vid Eoin!
Great angles, properly mic'ed up, lovely lighting.
I'll miss the cheeky phone being propped up, but I'm far more excited for what's to come.
Please keep up the great work 🤙🏼
I love my Japanese plane! Working on the pull stroke is much easier on your back and shoulders and also allows you to work from a seated position instead of standing. Can be a great advantage for someone (like me) who is disabled.
It’s so wonderful how we came up with such simple technology yet it works so beautifully.. easy thing about this world is if it’s not broken, why bother fixing it! I love that you focus on hand tools, so entertaining and I really feel like I’m learning something valuable!!
I've been interested in Japan and Japanese traditional carpentry for years. I love the sound of a plane shaving that ribbon off the wood. I haven't tried Japanese planes but would love to get one. I've read they leave such a nice finish you don't need to do any sanding before finishing work. I'd love to get a good set of chisels from Japan. Love the look of them.
Now I want to pull out what I do have and make something. Thanks for sharing your videos.
Love your videos lad! You could be an actor in movies or tv.
It’s so much more logical to me to use the pull stroke than the push stroke in woodworking. I don’t own any Japanese planes currently but I do own a Japanese pull saw that I love.
Incredible work, didn't even know about any of this and i still feel super impressed, i love these videos :)
Love the video very informative and very fun
I think what is more important is the finish left on the wood. I have seen a difference between my old Stanley and a more "modern" Lie Nielsen A2 blade which didn't quite give as good a finish to be honest.
Great job! 👍🏼
Pretty innovative workbench light
the quality of everything about this video is great! incredibly relaxing and informative content thank u for doing what u do
I love this Irishman
Great video. Enjoyed the look into the delicate art of Japanese planes
The push plane you showed there, I picked one up the other day and used it for the first time last night. Took it apart to see how it worked, how the heck to I get it lined up well now? :D B&Q did me dirty with a good deal, but no instructions ^_^
Thanks for such an awesome video! These are all things I want to know and learn more about! Love what you do, keep it up!
cheers lad, thanks for the support, will do.
Smashin jumper dude, nice video too👍
You make great content. Thank you. What's the most exotic wood you've worked?
you have gotten me into wood and technology thank you! and great video 💪🏼
Been a year, dunno if anyone told you this but dont seem anyone mentioned in these coments so, maybe not. There is a particular reason for that pulling technique which you can benefit. Their planing tables/set ups usually involve having the piece sloped down so that you can plane with a little help from gravity. The blocky nature can also help to use some techniques for pushing if you really need to where you equally de-emphasize where you distribute the power through your whole bother more evenly rather than emphasizing arm muscles (less tiring overall), while also using help from gravity and body weight, and/or skeletal strength too.
Idk anything about woodworking but I came for his accent
Needed this video about a month ago, bought a nice kanna about a year ago and was finally setting everything up. Got the job done in the end but it would have been helpful to have one more video to watch
I like this guy talented makes me wanna have my own workshop
Who needs a receipt printer when you have a Japanese plane?
As an engineer who uses micrometers. We say it as my crom it ter
But it my be my geordie accent
American: My-crahm-met-tur
It's worth remembering that a lot of Japanese tool technology can be explained by their relative lack of fuel and iron ore, leading to the need to economize on quality steel.
You've made your own extra long Rizlas.
Just got shavings at 0.12 thou (3.05 micron) with an L-N 62 and an 01 steel blade sharpened to 0.3 micron lapping film and the stropped on untreated leather.
That... is a nice sweater indeed
Your videos are always so interesting educational to me 😊
I'd suggest an air tight box maybe to help keep the wood as stable as can?
I'm a new sub and though your hard work does not go unnoticed, I'm sorry but I can't help but simp 😅 any ways, I adore your work (I'm a builder, not cabby). You put so much effort into everything, and effort shows in the finished product❤
Love from New Zealand 🇳🇿
Ps. Your sweater collection is wicked
Soon Eoin will be smooth as a baby
Ooof really nice job mate 👍🏼 makes me want to start lol
Did you invest in a better camera? (and mic but I can see that in your neck) It looks pretty good definitely better then the vertical phone camera lol
More close up shots would be a game changer. Great video non the less. Your going places for sure. Fair play good sir
Must not be much sunshine in Ireland. I'm Dutch and that's about as white as it gets, but I'm easily several shades darker. Get some sun, if you can; it is good for you!
I kind of like the idea of pulling sharp instruments than pushing. Much safer, I'd wager.
you spoke of moisture potentially warping the wooden body of the plane, but would soaking the wooden body in something like varnish work to protect it from moisture? That way you'd only need to sand down the bottom a bit to your get it back to snuff again, perhaps rub a bit of oil on for good measure and it would be fairly well protected against moisture warping the body.
@Conquering Death Yeah, that would work I think. Linseed oil is more dilute than varnish, so would penetrate the fibres better I think
Great and informative Eoin!
Love your videos. They always make me think if I should quit my software dev job and become a carpenter. One question though: where is that pullover from? It’s awesome
Juat to clarify, as far as i can tell the record is 3 microns (micrometers), which is actually 3 thousand nanometers. for reference if it was 3 nanometers, that would only be about 100 hydrogen atoms thick. You got to 25 micrometers thick with your final shave in the video, so the record is about a tenth the thickness
Small recommendation. Never hit the iron, use a small mallet on the front or back surface of the body to seat the iron and adjust it.😉
Also, your Japanesse pronounciation was FAR from the worst I've ever seen, quite decent.😁👍
To adjust the sideways movement in case it's not parallel/even, Japanese masters hit the back corners of the body, rather than the steel. Usually you just sight it in, works quite well with a little practice.😊
Keep up the great work. What part of Ireland are you in? I went there a few years ago and it is one of the best countries I’ve visited.
Co cork I think , what did you like about my country of ireland
You fulfill every positive Irish stereotype
Hello, I am curious if you sell any of your work. I'm getting into primitive camping and love your craftsmanship. With that being said I'm needing a good camp hatchet and would love to buy one from you
With japanese steel I am not surprised
Really cool thing
Nice sweater
I wonder if there is an actual use for wood shavings like that? I mean they're paper thin so perhaps ltierally as paper? Good campfire kindling at least...
Good guess, it was used for both 👍
Well, good for composting too
Jealous of your accent 😂 great video!
This tool turns wood straight into paper
Can’t beat county Naas 😉
Would you use these shavings to seal the endgrains on a project?
love this
Eh Eoin, I got a great topic idea for your next video, making my Eoin Reardon signature Ash Hurley 36” Kilkenny style Hurl 😂
where can i buy one of those in the states?
Why did you take some off the sole of the plane?
I want one
Naas, county Kildare?
what drand is your diamond stone and holder
How are you doing Eoin? Is there anything I can pray for you about
very interesting vids....here's a YT video I found on wood shavings in Japan...incredible
Old fashion way to make toilet paper
"Please take your receipt"
3nm eh
Making toilet paper
I mean no disrespect what you ever but your like the Alec Steele of wood working two two would get together and make something
This is plane jk