Interns or little brothers are worth their "15 minutes of flame" and they heal fast at that age anyway. He did a great job, both feet and all ten toes, dug into the task. Also, nice of him to act as an early warning device for paint damage on OL' Betsy during the burn. Duct tape, bailing wire and J-B Weld, the essential field service repair kit, must haves. Real nice burn too, did not disappoint.
If you need a "welded repair" in the future chris, try to find a TIG Welder. Better chance of getting rid of pin holes in the welds. Great videos as always, thanks for taking the time to show us how things are done "over the pond" 😉👍🍻
At least that Isuzu doesn't have a VGT. I'm waiting on a whole turbo for our deere 270D. Vanes all seized up with rust and carbon, plus a bunch of compressor end play.
working hundreds of miles from home as a welder, i have seen more machines burn to the ground from oil or fuel leaks, that i told them to shut the machine down it will burn, but no way, keep them going, so i never felt bad when i burned a machine to the ground, as company policy was you had to have a fire watch guy when any cutting or welding was dont on them, but you were always over ruled by foremen, threatening suspension with out pay for not doing as your told.. ok,, fire time
I hope Thomas is not allergic to poison Ivy. When I was a kid someone cleared a lot across the road from my house, When they quit for the day I went over exploring ( in shorts and bare feet ) I got the worse case of poison Ivy I ever had on my feet and legs. Great video :-)
Glad to see that those filters arrived in great shape. That package of oil filters are the pictures I used on the ebay ad for those filters. It's not often I get to see a package after I've sent it. You're welcome, keep up the great videos.
Good thing you had those cylinders repacked. With that thing leaking like it was IT could have become the "burn pile". Should have invited the neighborhood to bring marshmellows and a very long stick. It looked like a hot fire. I am glad it is raining somewhere. Here in middle Ga it is still hot and dry. Glad you got your oil line finally replaced.
I miss living in NC, my youth in Albemarle and Pops family around Plymouth. Recognized your vernacular right away. Wondering if a GPS Location of job sites a possibility, or do guided missile tracking systems pose too great of a threat?
Hi I have ben waching you on u2 for sume time see you work hard to get you home dune for your kids and your wife in my eyes you good job doing all of that just got good job keep up the work holp you be dune be the fust sonw come in good luck may god look you and family
Chris, could you have used hydraulic hose initially to fix that oil leak? Just cut off the ends of the original piece and use them with hose clamps? Quick, Cheap... temporary fix.
My advertisments are from a hospital in Okla for knee replacement. Had that done 10 years ago. Grammarly and the body shaper get mixed in as well. I think some of the girls i dated in the 60/70's wore a girdle. Shapers were not around back then, not enough stretchy..
J-B weld I love that stuff really good material I had a crack in my oil pan of my trans am nothing at work for two and a half years before I finally had to replace it really good stuff shout-out J-B weld
And see I thought you was in recovery from your addition of fire and here you go and have a relapse lol . Always good to see a good fire on your videos . It means the job is getting done and done right
Question, what would you do if you had the bucket in the fire pushing on a log and the injection pump blew, and the motor died? How would you save the machine? Asking because the injection pump just went out on my skid steer, and I had the bucket in front of the door and couldn't get out (*foot in cast) had to phone a friend, to pull me backwards while I rolled starter and released the pressure/rolling motor moved enough oil to roll bucket back enough for me to get out. LOL
Jon Schneck old Gehl, everything under cab. Lol. Had bucket almost straight down to pull side of a ditch. My leg is in a cast so climbing is severely limited. Lol
I saw a guy one time melt the batteries in an excavator because he was working too close to a burning brush pile. We had to drag the excavator away with two skidders.
so barefoot and shirtless at a fire , dumber than a box of cat litter. and burning the hydraulic lines off the machine???? nope, cheaper to do it myself, so is Chum Lee his brother?
Nice fire Chris. Nice to meet your brother as well. When does he get his own excavator? LOL
Aren’t you concerned about the hoses on the excavater catching on fire ?
Jeez Thomas, throw the diesel fiuel on the part of the pile that's not burning: not into the hot spot where it will instantly evaporate.
Interns or little brothers are worth their "15 minutes of flame" and they heal fast at that age anyway. He did a great job, both feet and all ten toes, dug into the task. Also, nice of him to act as an early warning device for paint damage on OL' Betsy during the burn. Duct tape, bailing wire and J-B Weld, the essential field service repair kit, must haves. Real nice burn too, did not disappoint.
If you need a "welded repair" in the future chris, try to find a TIG Welder. Better chance of getting rid of pin holes in the welds. Great videos as always, thanks for taking the time to show us how things are done "over the pond" 😉👍🍻
At least that Isuzu doesn't have a VGT. I'm waiting on a whole turbo for our deere 270D. Vanes all seized up with rust and carbon, plus a bunch of compressor end play.
If Chris isn't wearing his flip flops then barefoot is a really bad idea.
Pile it up because we all know fire burns up not down . Glad it rained so you could get on with burning and use you newest investment !
Does that turbo oil supply line need some abrasion resistant covering to prevent future wear-throughs?
Young people and brush fire burning. Great combination. lol 😝👍🍩☕️
Did you drag Intern Thomas away from a high school pool party against his will?😂 Nice fire👍
working hundreds of miles from home as a welder, i have seen more machines burn to the ground from oil or fuel leaks, that i told them to shut the machine down it will burn, but no way, keep them going, so i never felt bad when i burned a machine to the ground, as company policy was you had to have a fire watch guy when any cutting or welding was dont on them, but you were always over ruled by foremen, threatening suspension with out pay for not doing as your told.. ok,, fire time
We need more Thomas
You should get a stump shredder. you would love it, and easier to get rid of the wood.
I hope Thomas is not allergic to poison Ivy. When I was a kid someone cleared a lot across the road from my house, When they quit for the day I went over exploring ( in shorts and bare feet ) I got the worse case of poison Ivy I ever had on my feet and legs. Great video :-)
Does Thomas know about OH&S he should think about it next time when he’s wearing no shoes
Leave that lid open and power wash that engine compartment, you know it's going to bother you until you do!
A little violence is always warranted !! Lol
Wow, two fires in one week!
When will your brother be some more videos, like to see some young guys getting in to some hard working jobs .
Just like Red Adair!!!!!!!!!!!!
No shoes, no shirt, no service. LOL
S'mores anybody?
“Global warming” just hit the dislike button in this and in the previous video
Natural fires from lightning burning down miles of forest?
LOL! I'm pretty sure that running the Hitatchi is contributing to climate change more than the bonfire.
Distain of PPE runs in the family.
Glad to see that those filters arrived in great shape. That package of oil filters are the pictures I used on the ebay ad for those filters. It's not often I get to see a package after I've sent it. You're welcome, keep up the great videos.
thanks again, ones about to go on there now that ive got the oil leak fixed!
Chris was nice to meet your little brother, and it was nice to see his big brother 👉(you) looking out for him 👍
Man you need a ripper to split those stumps and increase the surface area to make them burn faster.
The people in that white house probably have their suite cases packed when they felt the heat from that fire...
As much brush as you burn I don't know why you don't hire a mulcher company or even buy a unit.
You could hire it out when you're not using it.
funny story, while I'm watching I smell smoke lol, neighbors burning some stuff....
Good thing you had those cylinders repacked. With that thing leaking like it was IT could have become the "burn pile". Should have invited the neighborhood to bring marshmellows and a very long stick. It looked like a hot fire. I am glad it is raining somewhere. Here in middle Ga it is still hot and dry. Glad you got your oil line finally replaced.
Idiotic bullshit letting the kid around fire barefoot with diesel. Not cool at all.
Man the things that I could get done on my property with your machine...
Thomas knows how to make the most out of his 15 minutes of fame 😉😂
Fame or flame????
Very nice again Chris, zending you six oil filters from Canada, finally you got the original oil line to repair 👍😎👌
Nyalic is right down the road from my house
Very class the machine escavatrice and tank you very much for vidéo and good moment with you.
Bowling with tree stumps
'burning good on the other side' is what those people in the white house said......
I miss living in NC, my youth in Albemarle and Pops family around Plymouth. Recognized your vernacular right away. Wondering if a GPS Location of job sites a possibility, or do guided missile tracking systems pose too great of a threat?
Think I would get another one of those oil lines.
@letsdig18 reminds me of when i had a GMC jimmy remote oil filter ,line leaked pain in the backside to change the lines and filter assembly
Hi I have ben waching you on u2 for sume time see you work hard to get you home dune for your kids and your wife in my eyes you good job doing all of that just got good job keep up the work holp you be dune be the fust sonw come in good luck may god look you and family
Lets start a fire then dig 18 HAHA
Ill vote for more intern Thomas. Get him in the machine! Seems like it would be interesting video!
The wisdom of youth lol cant tell them anything they know everything . Or think they do lol . Hahaha
4 weeks maby 5 boy i wold bend that pipe with my bare hands and give it to you within a week for a fraction of the price
Hire that man for the camera commentary. Funny. Lol
new guy
👍💜🤓
I think we definitely need to see more of intern Thomas!! lol
Chris, could you have used hydraulic hose initially to fix that oil leak? Just cut off the ends of the original piece and use them with hose clamps? Quick, Cheap... temporary fix.
it would have melted on the exhaust
Greetings from Puerto Rico I love all your videos I am a mechanic and operator of heavy equipment send me greetings ben your next video
Enjoyed the video bro and was neat to see your brother getting his few minutes of fame plus adding ventilation holes to his T shirt.
I hope someone brought the marshmallows.🙂
..one bid bbq,.great vid and fire..lol..
Ya might as well get it all! Burn, baby burn!
Noo way the burn was completed stone sober 🤣
Fire good... We're not "allowed" to burn stumps out here... not that it stops anyone but still... good times
thomas is going to make a good 2nd LT lol this coming from a retired Infantry SSG
Does that heat hurt the hydraulic lines
As little diesel and motor oil works good.
I felt that heat at 5.20 and I'm in no. Illinois
Chris....calm down !!! I can feel the heat down here in Florida!! 😀😬👹👺
it rains all the time
"No more oil leaks...One good machine now..."
Oh boy, now you've done it.
Never a wasted move!
Y'all gonna git a nite tyme sun burn 😆😆🤪
Naic, yur fires are the best.
Great that you finally got the correct turbo oil line. Good job with the video camera Intern Thomas and gettin' the fire going!
ROTC- made a killer out of me!
Great video Chris. I feel your aggravation about fixing stuff! You sure put in some FULL days!.
I was wondering if I was going to see the right video after watching two commercials for womens body shapers.
The adverts are based off your computers search history! lol
You got the easy ride, I always get fuckin " Grammarly ! " Ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
My advertisments are from a hospital in Okla for knee replacement. Had that done 10 years ago. Grammarly and the body shaper get mixed in as well. I think some of the girls i dated in the 60/70's wore a girdle. Shapers were not around back then, not enough stretchy..
And LOCATION. I get ads from local businesses @@HughzieTube
I've had Grammarly too but Im always checking spellings on google so its to be expected.
J-B weld I love that stuff really good material I had a crack in my oil pan of my trans am nothing at work for two and a half years before I finally had to replace it really good stuff shout-out J-B weld
Hey Chris, Can lil brosive operate equipment?
Hmmm! OSHA may be on the scene in the near future LOL!
You wouldn't even have mechanical problems if I worked for you Mr . Cris 👍
Great video enjoyed watching hope you are having a great weekend
Nice fire Chris just reminds me of when I used to grub out apple orchards with my dad when I was a kid good red hot fire they will burn anything
After seeing some comments on the last video, I think you should glue all that wood together and build houses for poor children lol
So after a night of drinking this would be a cake topper for me!!!!!
Oh Yea! Slinging stumps into the fire!! No tree to catch this time😉.
Nice 🔥 Chris your little bro is hilarious 😂😂 nice video 😎👍😅
Another Great one Chris !! losing a 1000 Bucks i bet you are pissed at it but, ya got licked now..Have a Great Weekend !
And see I thought you was in recovery from your addition of fire and here you go and have a relapse lol . Always good to see a good fire on your videos . It means the job is getting done and done right
Admit it! you are addicted to starting fires!! LOL.
Teach em 👍
Question, what would you do if you had the bucket in the fire pushing on a log and the injection pump blew, and the motor died? How would you save the machine? Asking because the injection pump just went out on my skid steer, and I had the bucket in front of the door and couldn't get out (*foot in cast) had to phone a friend, to pull me backwards while I rolled starter and released the pressure/rolling motor moved enough oil to roll bucket back enough for me to get out. LOL
watch it burn it about all you could do
most skidders have a manual valve to lower the boom just for that reason
Jon Schneck old Gehl, everything under cab. Lol. Had bucket almost straight down to pull side of a ditch. My leg is in a cast so climbing is severely limited. Lol
First
I have seen that you take great pride in your equipment's cleanliness and maintenance. New and used.
Thats awesome you are able to have your little bro out there with you but Wtf thats really intelligent having nothing on his feet!
Boys will be boys.
@@briangardiner1015 I gotta disagree with that statement!
You never did dumb shit after countless people told you not to as a kid?
I saw a guy one time melt the batteries in an excavator because he was working too close to a burning brush pile. We had to drag the excavator away with two skidders.
so barefoot and shirtless at a fire , dumber than a box of cat litter. and burning the hydraulic lines off the machine???? nope, cheaper to do it myself, so is Chum Lee his brother?
Dear Intern Thomas - I hope that you're as hard working as you are cocky, young man!
the saga of the oil line is now over.?. maybe.
Great job enjoyed that!!!! Let it burn
you want to kick that fire off try a leaf blower
I had no idea you were a certified JB welder.
yeah it is
Weenie Roast or s'mores anyone it's probably too freaking hot to get that close lol
Awesome fire Chris burn baby burn