This is why girls LOVE Harley Davidson
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Win a 2021 Ford Ranger Tremor! 100% of the proceeds go to benefit Forgotten Angels rafflecreator....
If you love what we do here and would like to support the channel SUBSCRIBE and check out our patreon here / shadetreesurgeon
Follow me on Social Media here
/ shadetree_surgeon
/ shadetreeyt
/ shadetreesurgeon
Want Shadetree Surgeon Merch? Grab it here
www.brapstar.com
Subscribe to Cheyleesi
/ @cheyleesi
Subscribe to Flip Na
/ @flipna
Follow Cassidy on Instagram here
/ abduxuels
Give Bert's a call and tell em Shadetree sent ya, they'll treat ya right
Bert's Harley Davidson
10525 49th St N
Clearwater, FL 33762
(727) 527-9672
Subscribe to Bert's Barracuda TH-cam channel
/ @bertsmotorcompany - ยานยนต์และพาหนะ
Go vote for Cassidy to be the Inked Cover Girl here! Lets get a Shadetree Army member on the cover!
cover.inkedmag.com/2021/cassidy-miller-2
Voted,u got this Cassidy 🖤
Went to link... pics look good,too bad there were not pics of her w the Goldwing....it would've sealed the deal
Done
Done.
Done and done! She is so freaking gorgeous! 😍
You can stop looking for dates now. Do whatever it takes to spend more time with Cassidy. She's damn near perfect.
Near??
This comment needs more likes
Josh would be dating up but hey, that’s what all guys should strive for!
I want to see cassidy and shadetree more on this channel.
@Al Gottsch check her onlyfans
Old shovelhead/evo exhaust flange trick... IF you have clearance/swing room for wrench = install longer full length thread bolts with nut & lock washer (washer facing flange)... snug bolts until seated ... use nut & lock washer to evenly tighten flange....puts more load on external bolt threads instead of internal threads...
Cassidy looks great with her hair "down." Good for The Crusty Glide. Good for Josh. I'm jealous. :-)
Carry tools on any Harley new or old you'll be glad you did. I have tools oil plugs plug wires and a set of points on the 72 FLH. Good video glad you got her back on the road.
My girl asked, "Why am I voting for this girl?" I just said, "Cuz Shadetree asked, so just do it honey." jajaja! +2 votes from DFW, TX!
Nice XD
2 from Jax, as well!
Whenever you’re getting on an entrance ramp I always hear: RAMMING SPEED!!!
WAGONS EAST!!!
My favorite thing
Followed up by a wide shot of him being passed by an elderly person on a Hoverround
Cassidy needs to be on the back of your bike permanently 👍🏼
You seem like one of the friendliest people out here on TH-cam. If I was cooler and came from your area I’d wanna be your friend. Looks like you’re always having a good time.
Does me good to see one of us uglies get the girl. Shes a keeper Shade!
When you called a can of starting fluid "a little bit of persuasion" I about died f****** laughing. I used to use starting fluid every time I started my truck. I also used to joke around that I had to persuade it to get started
There's a brand in Australia literally called "Start Ya Bastard" I want some just to have it..
"Start assist" lol
We need a “RAMMING SPEED!” Sticker!
Voted 🤙🏼
Re. The exhaust. If you don't want it to break again, try a rubber/flexible mount on the muffler. The engine is rubber mounted and moves in the frame so the headers want to move with the engine. The muffler, being solid mounted to the frame will cause problems. 👍🏼
“It’s not broken, just temporarily inconvenienced”
That needs to be on a t-shirt
i like....its not broken, its just loose
Theres pills for that now...
The exhaust has to move with the enhine. It will break, or the head studs will break if you don't rubber mount it somehow, or make a bracket that comes off the transmission.
I think I have a bracket for the trans that can be welded to, that you can have
I was thinking the same thing..lol
Shadetree mate, stop saying you're ugly in front of a pretty girl. Of all the things you do for others be a little better to yourself and start here. You're my favourite TH-camr, keep up the great work. 👍
The Crusty glided just got DPed! (two into one) Plus Shop safety fail with no glasses/googles on the drill press.
LMAO "It's freezing cold..." Okaaaay... it's 24 degrees where I'm at today, and that's mid-afternoon and the highest we're gonna get. And for all that, this is WARM compared to seasonal average here! My heart just bleeds for ya, brother......
She earned these votes. Both fixed and rode crusty glide in the same day. She earned that ride and that cover.
Dude right?
Hello ShadeTree, great video. One of your best this year. Cassidy shows respect for you, your bike, your tools, your broken parts. I really feel she is extremely talented and caring with great mechanical ability.the bonus is she is beautiful inside and out. I hope she wins as I will cast my vote tomorrow morning. Thank you for keeping it real, your good man with kind heart. I think we can all see that even when you say your bad. Hope your father is comfortable. Prayers sent!
I am going go way out on a limb here and say Cassidy hasn't heard the word no enough in the last several years for it to even registered anymore. Glad to see Cassidy back & the FXR back up and running.
Fair enough haja
Had the shifter on an 05 road king go to the floor board coming off the highway. Luckily I was headed to a HD shop and borrowed Allen wrenches from them also it was a heel toe so only the front was loose. Just heel toed it with the back shifter.
“that’s all that takes?”
lmfaoooo. that’s how everyone feels when we first start wrenching.
Love your vids my man! .... don't want to be a negative nelly, but the motor is rubber mounted and jumps around a lot, and the muffler bracket you made is connected to the frame. something's goanna give, but I applaud the effort! ROCK ON!!!
There’s a FXR bike show at the buffalo chip campground in Sturgis every year. You really need to bring that and show everybody the rolling work of art you have created or have kept running.
I never used to like the look of the two-in-one pipes but now that I've tried them out I'm hooked.
You guys got great chemistry together, a cowboy wizard with a goth never looked better together.
Nothing like turning wrenches to make a bike really feel like its yours... this winter I am workjng on my 81 FXB Sturgis replacing a few bearings (primary and starter shaft), putting in a new clutch and changing the ignition from points to electronic... I'm gonna be walking instead of riding come spring as I never done these jobs before...
Barf Party rides again! Love the 2 into 1! It sounds slower..🤣 Great vid man and feel free to bring Cassidy in many more Vids..she ain’t hard to look at! 🤘🏻
I love the sounds of a 2 into 1 under load
That baffle will give it alot more bottom end torque and help the bike run better u may wanna try it and see what u think. I have a 2 into 1 on my evo which I tried both ways and baffle in is definitely the way to go👍
I've always had in interest to learn n fix bikes, but where I'm from in Singapore, you can only do it thru months long courses, and workshops are always full of work. So this vid puts a smile on my face!
Lol apparently the Goldwing is a goth girl magnet. I need one ASAP! Also love the motivation of going back for the gloves. It reminds me of Harold and Kumar "you want to go back and get it?"
"No we've gone too far."
Oh, & "Never broken, just temporarily inconvenienced," is the quote of the day!
Cassidy is the cutest Hefer in the Shadetree Herd..
I just realized I used to buy Motorcycle Parts from Shadetree parts.. I acraully bought a new Exhaust for my Yamaha Snowmobile from them and they are located I think in TN .
Sounds SOOO much better with the 2 into 1 !
"Not always a guarantee."
I've never had a problem out of a Honda Motorcycle yet that wasn't my fault. Mine died a few times, but that was poor maintenance and also being stranded without gas. She's due for a few things, but mine has taken everything I've thrown at her with such grace.
Honestly same with my Honda Shadow 125, I just sold, she struggled and had problems but nothing a good service and polish every now and again wouldn't of stopped before it happened
@@conner1466 My Honda Shadow 700 lacks a little in parts availability, but people have provided me with places to look, and if they are actual leads, I might be set.
@@BikerThoth yh part could somtimes be a pain but somtimes it same part our other and most honda 125s use so half time wasnt to bad, it was always the odd obscure things that were hard to find and thus expensive
@@conner1466 With the dead reliability of mine I don't see needing any of those parts anytime soon. Most of the parts I actually need are more cosmetic or are for my comfort, such as the busted lighting cluster. Shifting into 6th causes the overdrive light to go on and lights me up like a drunken sailor.
@@BikerThoth can u explain the overdrive gear on my vt500e, not been able to ride and figure it out but specs show say it has a 6th overdrive gear and no one I asked given me a straight answer and Google didn't help much either
I wonder if the exhaust will melt the saddle bag. Maybe check? Maybe just fix the whole it makes meh.
Barf Party Starts
Shadetree: “wow this is a lot quieter”
Camera: “What!? I can’t hear a thing! My ears are bleeding!”
Shadetree for president
Would be better than what’s going in
Might as well
Make America crusty again
Got my vote fuck
🤣
Need to keep Cassidy on the back Crusty. Two mechanics are always better than one. Oh, well you need a tool roll too. She's beautiful!!! And I'm not talking about Crusty Glide.
She's gorgeous! Love her fearless attitude. She did well with some direction of the great Shadetree! As always, great vid man!
love the wing since I also have a black/silver 87 Aspencade . For less than $3000 many around and capable, with a cassette deck
"Careful they may be sharp"..... Such a sweet Talker. You are a Rockstar!
Yes, the exhaust on the Crusty Glide is much better. I love it.
You need to come up with a bracket that moves with the motor since it's a rubber mounted bike or else you're gonna crack the bracket, pipe or even the studs in the cylinder head. Most fxr 2 into 1 fxr exhausts either mount on the trap door on the side of the transmission or on the older ones there was a place to bolt a diamond shaped part with a rubber donut in the middle to allow the exhaust to move with the rest of the drivetrain. Be careful riding with that mount Ive even seen ppl crack cylinder heads with the exhaust mounted like that on a rubber mounted bike
i love the raspberry buffet bike. I've seen some fxr on ebay lately. i like old harley davidsons with sidecar.
Well holy crap Josh. That was a legit video! Nicely done. Exhaust looks and sounds good.
I think it sounds a lot better with this exhaust
Sounds Good!
i give this guy crap about his girl friend dumping him but man he doesn't deserve thumbs down / i love his content he has great videos.
Nice FXR and Covergirl. You really have to get used to clamping down stuff on your drill press so the part doesn't come around and injure your operator's pretty face...
Brother I just wanted to say thank you for giving us content to watch. You certainly made me want to ride more, and become a motovlogger. And now i'm doing both! I hope to see you out there on the journey for BEER! Stay say man, hope life flows like the beer in our veins.
Same here, finally have everything I need I think so hopefully we can get out there too and make awesome content
@@jerlaine1638 Hell yeah man! My buddy and I are hitting up the Dirty Shame and acouple other bars once this bike of mine stops giving me trouble with this drain plug. Gotta see this man bartend once in my life.
I can just see me rolling up to my MOT station (annual Safety inspection in UK) on KrustyGlide, and they guy writing out a fail notice without even taking the bike indoors.
Nice “new” exhaust and even the seat got an upgrade!! Glad Cassidy gave the crusty another try after some good ole elbow grease.
Oh hi Beth :)
Came back to look at the comments again now while on the Flip's Livestream and here u are :D
fxr are rubber mounted, bracket to footpeg = broken exhaust in the future.
Shadetree Surgeon, Voted for Cassidy and will vote for her daily till Voting ends. Crusty Glide doesn’t sound bad with the new exhaust. Nice fix for a bracket. Crusty Glide will live forever!!!!
"You can't buy that kind of patina." Hahaha love it!!
Love it!
This is hands down my favorite TH-cam channel. Go get em Cassidy
That 2 into 1 sounds pretty good though, good thing it gave it a boost in performance.
Good job guys looking awsom. Hey was thinking about it can't u use the original exhaust bracket and do some thing off the back of it and I don't really think you'd see it that bad but looks good a Neuf to keep it on the bike
I love the new sound! Nice low rumble. Well done, Doc!
I like this date video a lot more than the last one.
Dude, I knew that chick was hot if she wanted to be. Just her hair alone did the trick. Then being interesting in working on bikes is the icing on the cake. Lets see more Cassidy for sure.
Josh, i could throw a basic tool kit in one of Barf Party's bags, but that would leave less room for beer and snacks.
Wouldn't be a bad idea to use a rubber mount on the exhaust bracket. 4 wheeler engine mounts works perfect
How do you not have a monster tool roll on Barf Party at all times? Like really!
Maybe when that new pipe melts the bottom of the bag off he will weld a tool box on that side.
Cassidy is good people. She did my latest tattoo while I was in Tampa last. All she has to say is I was fixing an FXR the other day... instant street cred
Still really sorry I didn’t get to hang when you were in town
All good bro. Life happens sometimes. I shall return.... 🤣😂
"you gotta turn some wrenches on Crusty Glide to really learn to love it"...... Yep, I've rebuilt 2 EVO bikes and I love em.... Rode a TC around North Arizona for a weekend and missed my crappy old EVO
“I’ve never done this before”
A lie all females tell
Cassidy has The ability to make this old man cry
From mounting a gopro on the tank of a rocket 3 and hitting it with handlebars to modeling your harley in the brap star shop.
You sir. Are a legend of the swamp!
Stay wierd.
Dude decent exhaust but I noticed that your fabricated bracket is attached to the frame but the engine is rubber mounted which is going to play he’ll on your exhaust. As the engine moves from vibration and torque, that muffler should move with it and not stationary. Trying to help, take care shadetree.
That mod made the fxr at least 10 times better looking! Where does one get a Cassidy?
To be honest. Cassidy looks like a cool chic.
Vote made for Cassidy - check.
Good to see her back.
The shifter fell off my bike one time, 300 miles into a 500 mile trip. I reached down and put the lever back on the shaft at 65mph. I then rode for 50 miles holding the lever on with my left foot til I could find an open hardware store to buy a wrench and hardware to fix it. Good times.
No problem. Try 175 miles of 200 on a bicycle with a broken rear shifter. That means two gears inside of 12 Now with one of my motorcycles will I ride today , Felling lazy I am.
I love that she loves your Harley :)
You're in Florida IT DON'T GET COLD!!!!!!!!
You'll want to change the rear muffler mount to a rubber mount or your exhaust will break off . I used a 1961 american motors motor mount on mine (hours of searching ! ) ,pretty heavy duty & never broke . I had a 40 year clubber tell me if you can pick your bike up by the exhaust it might be strong enough .
Nice upgrades bro!
Cassidy being the best😛👌🏻
Done did voted!
She’s like a tatted Gwen Stefani 😜🤤
I have never been a fan of ink, and a really funny like piercings, but damn...she is gorgeous. And she's got a great attitude. You need her on the channel more often.
Gotta say, I've been following this channel for years and the barf party is the most visually obnoxious harley I've ever seen and I fuckin love it! Keep it weird!
Cassidy is a natural! Take her tool shopping, and then dinner.
As much as I like loud, deep growls sound so much cooler haha
Best thing I did was rip off my crap pipes and throw on some SE stuff. Sure it’s lower volume, but the deep rumble is so much more satisfying.
In the current state of politics I hope all of you a good run no matter what side you are on. And I hope you live the life you wanna live without anything political raising your blood pressure like mine. God bless you all and god bless America 🇺🇸
I noticed a Triumph rigid frame in the background. I suspect Josh and Weems will collaborate on a Turnip chopper build sometime soon. Crusty Glide lives (well..., sort of).
2 grinders is good and 3 is even better. I always keep a cut off disk a grinder and a flap wheel on mine.
You know, we all make fun of it, you included, but jokes aside the Barf Party really does exemplify everything riding is all about.
Crusty is one finely tuned machine, you sir have a thing of beauty! :)
The new pipe is too nice fer Crusty..
Crusty takes the swamp!!
The 80's music fill-in around the grindng shot reminds me of Knight Rider hahahaha
Pro Tip: Go to HDWR store and buy 3' of chain, attach one end of chain to chuck wrench, attach other end to drill press.
2-1 is the way. Its what I have on my 14 Ultra Limited, sounds good and runs great.
Krusty Glide- what is dead may never die!!!
Am I the only person that stopped the video @ 14:35 for two reasons.
She is actually good at this!!
Cassidy is getting my vote just because she's brave enough to get on the back of those bikes.
Shadetree you are still scaring me
Hammer is basic harley tools, my vote is for her.
South Texas Red&Gold !
Cassidy is definitely the best right after Chey
Dude if you ride a old EVO or Shovel, tools are a must hah! My whole right bag on my Shovel is full of tools
I have a fricken backpack and i have to customize the load of tools depending on what has been broken lately....
I've always run 2 into1s like an inch and 3/4 pipe. I think it's funny everybody puts 4-5 " pipes on and wonders where their toque went and why it sounds like shit on decel. Love,love that sissy bar. I've had that on a couple bikes as well. Wish it would go on my roadking. It will go on my Kawasaki, if you have no use for it later. Then I can have a kawaharley. Ps I think it sound great pps eating vegan let you live an extra day.
If I rode my 2000 wide glide from MS to FL can we ride and slam some beers?? Def my favorite channel here on TH-cam.