iPhone 6s charging flex replacement - Easy way

Replacing the charging flex on an iPhone 6s requires some technical knowledge and precision, but with the right tools and guidance, it can be done relatively easily. Here are the basic steps to follow:
Turn off the iPhone 6s and remove the two screws located on either side of the charging port using a pentalobe screwdriver.
Use a suction cup or a spudger to pry the screen from the bottom of the device, being careful not to apply too much pressure or damage the screen.
Use a small screwdriver to remove the metal plate that covers the battery connector, and then disconnect the battery from the logic board.
Use a spudger to disconnect the three cables connecting the display to the logic board, and then remove the display completely.
Use a screwdriver to remove the metal plate that covers the charging flex connector, and then disconnect the charging flex from the logic board.
Install the new charging flex, reconnecting it to the logic board and replacing the metal plate that covers the connector.
Reconnect the display to the logic board and reattach the metal plate covering the battery connector.
Reattach the screen and replace the two screws on either side of the charging port.
It is important to note that these steps are a simplified overview of the process, and it is recommended to follow a more detailed guide or seek professional help if you are not confident in your ability to complete the replacement yourself.
#youtube #iphone #repairing