How To Very Easily FIX A BROKEN SPARK PLUG WIRE!!
ฝัง
- เผยแพร่เมื่อ 9 เม.ย. 2019
- How To Very Easily FIX A BROKEN SPARK PLUG WIRE!!
In this video I fix a broken spark plug wire on my 2003 Chevrolet Suburban 1500. I decided to check the condition of my spark plugs and got through two on the passenger side just fine. When I went over to the driver side the first plug I pulled broke. So, instead of dropping $100 dollars to buy a new set I decided to fix it.
ACDelco Spark Plug Wire Set: amzn.to/2WWorjK
**This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional. The methods I use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Working on cars is extremely dangerous. I am not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
FTC Disclaimer: I am an Amazon affiliate. As such, I earn a percentage of sales made through Amazon Affiliate links found in the description of my videos and on my website and other places. - ยานยนต์และพาหนะ
THANK YOU! Not only do I have a broken spark plug, but I broke a wire like this and I didn’t want to have to buy another set of wires, too... This was awesome, thank you for helping me out!
Just did this, this morning! Thank you!!! This video not only satisfied my curiosity but saved MY REAR LOL. I HAVE the money just not ready to spend on it this yet. The wires are new and I was taking the manifold off.
This is EXACTLY what just happened to me. I already put 2 and 2 together and fixed it but I support this video bc other people may not be able to improvise like this. Thanks!
there are too many dumb people on earth who cant think outside of box, so videos like these are treir only remedy. Or a thick wallet that pays for everyhting.
Glad I searched this. I just replaced the plugs wires months ago. So I am ready to replace the plugs I pulled out the wire it came loose. So I'm glad I found your video. Thks
Fixed mine using this method. Thank you very much! Was gonna buy a new set, but this saved me!
Your videos are really informative and intended to help people save time and money. Good job
Thanks man, Ive had a set in my car for 2 months bought them new and 3 of them just did this when I was checking the spark plug cables! So glad I came across your video!
This was very informative and actually an entertaining watch. Thanks!!!
Great. Saved me $89 plus tax and shipping! easy for follow and the grease trick worked great. Thank You!
Murphy's law dictates the last plug I replace would do this 😥 thank you so much for saving us! Didn't want to have to replace our already newer wires!!
U keep working on One of The easiest to work on Vehicle's of the 90's and beyond, some what modern but no where near MODERN at the same time........................
EXCELLENT DIY, just had this happen to me, saved my day, peace!
i do the same thing but i use basic wire crimpers. they usually have a spark plug wire crimper built in
Thanks for the video.Applied it to riding mower and it worked.Saved me some money and time.
Just did the exact same thing to the exact same wires! Thank you!
Me too
Thanks for posting this. I fixed my sparkplug wire thanks to your video.
Thanks a lot! Now I can confidently fix mine now.
Pretty good explanation tbh so far the best I could find on yt
Your videos are good !
Awesome fix. Had to do it on my msd wires. Thnx
دظزنحهغفل رانك ججج غفف5غ6 حكم الوعد8جm 1 m
thankyou very much for the tip on the die electric super lube grease, i need it for fuses and seems good for just shining up the motor protection maybe similar to silicone spray which cost too much now for detailing use...
This was very useful to me. Thank you!
Thanks for this video. I personally think this fix will last a lifetime, unless your try to take out the spark plug again then you might disturb the plug wire again. Otherwise I think it's a pretty good and solid fix.
Awesome video! Thank god the envoy has coils :D
I thought I was doomed I love you for this. Their like $100 just for the set of wires it would be nice if they sold individually
Good stuff ! Helpful⚒️👍
You saved me a trip to the parts store. Thank you
This worked for me! Thanks
Done this many times in the past minus the grease. One time a repair shop claimed they had to replace a bad plug wire and replaced it with one with a plastic boot that ended up cracking my spark plug in half. Had to buy a new spark plug and I replaced their plastic boot with a rubber one from an old set. Yeah they replaced a wire from an almost brand new set.
Thank you! You just saved me!!
Fixed my lead and saved money, thanks!
Sweet!
Also to find out if plug wires are good check the resistance.(OHMS) ... Great Fix. 👍
very nice video... Thank You so much for making this... i had a no start condition so i check for spark and i had non. i removed the coil and cleaned mounting surfaces. and regap coil. still no spark found end of coil wire at spark plug faulty connection could not believe it, trimmed end off recheck and now it working great, just crazy problem... yep it was the end of the wire at the plug... who would of thought no spark problem is at the end of the wire at the spark plug connection ???
Thank you for sharing this!
Just happened to me an hour ago...luckily my wires had the imprint and I could clamp them how they were truck ran as it did prior...I stumbled upon this video to see if Itll be okay or if it was a temp or if it was really that straight forward and easy to fix....on a scale of easy to easiest, I'd give this the easiest thing I had to fix
My Jeep Wrangler #6 spark plug wire kept popping off whenever I'd hit a good bump. Pulled over on the freeway as I was half way to picking up my wife from the airport. Took Super Glue I had in the glove box and put a few drops around the rubber boot and popped it back on the spark plug. Been running good for a week, lol. I did order a new set of wires and have the tools in the Jeep to fix it should it break while driving and of course have a roll of Duck Tape......
Thank you for the informative video, added a pair of needle nose to my emergency kit, lol
Great video, helped me out, had to do this today.
Thank you! This has saved me about £50!
Thank you! I have the same problem!
Still get the Aceel ceramic boot wires there completely worth it
You can buy one AC Delco spark plug wire from Advance Auto too.
No you can't
Yes, you can: Part No. 349V. Also at Amazon and Home Depot.
Why do I get the feeling you were rough with the last one you checked, just so you could cover this topic? lol
Just kidding, top notch content as always.
Chuck
Thanks for this! Didn’t wanna buy a new set of wires!
I 👍ed because I enjoyed it 'at least just a little bit'!
I've spent a coupla days trying to fix a strimmer. Seen all the videos. Turns out there is something wrong inside the 6" ( ?) of ht wire. It's moulded into the coil, which are cheap enough but a) the principle of the thing, b) month by slowboat from China. Looking at doing a splice but didn't realise how THIN the one strand of wire is inside, and DELICATE! Even your one has its own private insulation!
Can I still use the spark wire by plugging it back in the hole with the metal piece still on the end of the spark plug?
4 of mine just did the exact same thing on my suburban lol thanks for this
Mines is still in my wire set. Looks like when I pulled it off it got stuck a bit so now it’s like at the tip of the wire instead of all the way inside.
Mines broke at the bottom behind tire.loud ticking.Wat to do
Thank YOU!!
good job I have a lot of spark plug wires, I will fix it by same way.
This video just saved me from spending the money I don't have thank goodness
Thank you I broke 2 on my ute and I was not spending 50 bucks on a new set
I like it 👍👍
When your on tight budget it great solution get by but if going do spark plugs might as well do plug wires as there usually what ages the worst and cause misfire in first place unless new enough to where most vehicles use coil pack to spark plug now
Love the acting at the start of the video we've all been there 😂
Haha
Me 5 min ago
@@garrettgiuffre7298 me earlier today 😩
After this video 😏
What about the curved spark plug boots? Any way to fix those?
Thank you!
Good job. I quit a job today beacuse i pulled the wireand it broke. Then i saw your video.
Your my hero
Thank You!!!!
What do yall do if the boot wont stay on the plug?
What do I do if I lose the little connecter?
really awesome dude !
i have not seen that in a while. and that stuff actually happens.
awesome video !!
I pulled the spark plug wire off of the boot. When I took the boot off of the spark plug, the crimp was still in boot. Can I fix that?
You sabe my day
awesome vid , probably it'll work for my motorcycle , i made the mistake twice, technically a 12 v whatever should be ok BUT it fries the starter solenoid i can get used or aftermarket cheap, so next i have old carbs i clean over and over , this time spotless mostly BUT i find two funky spark plug wires (big 4 cylinder) so i realize the messed up running has been a short and not running probably the both wires same time but i think it'll get me rolling fast/lol i saw the vid a while back but i went legally blind a spell , very depressing and aging i guess anyway i got projects all over now i can see but i'm out of shape from the ordeal still , it's been awesome though i had faith and learned alot about the temp state but man imagine i'm 40's , 75-80 year olds pull rvs, boats still i felt old a moment /ranting thanks for the vid i'll try to update if it works for me, i think i have to buy two entire coils used to get the boot and maybe i should study aftermarket , it's good to learn to test the coils too (i'd need to look up ...i have a pilot valve driving me nuts , the idle jet breaks and the carbs are as much as a lower mileage motor but with no carb rack or airbox needed for correct performance if i went back from slide valves ......
Nice fix jimmy i have learned alot with your videos 👍👍
Do a show on cross threaded plugs!
Good fix Bro! Thanks for sharing
Put the lube on the wire next time...not my first Rodeo..Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸
Holy hand bouncing, Batman! Thanks for this, you just saved me $50.
Great VEDIO !!!!....
the only time this has happened to me when I got a truck where the person just replaced the spark plugs and wires with copper plugs instead of double Platinum two weeks before I bought it with no grease in the spark plugs boot. I just decided to go ahead and replace the cables. I rather would not have taken a chance.
Thanks
What are the symptoms if u ride with 2 that are broken
Make sure the shortened cable still reaches the plug
Nice boss.
Kuya pano po ayusin yung spark plug ko nabubunot ng kanya o natatanggal minsan sa kalye tas tumitigil ako.. Sa mio soul i 125 po
What if the tiny wire has broken off?
This applies to lawnmowers too!
Ive built spark plug wires for a old tractor i bought new wires but had to put ends on them and cut them to length it is possible to fix and make custom ones
I don't understand how a cased wire makes contact with the metal couplink..tried soldering the wire, it just melts. Weird space stuff I reckon, but I crimped it back together and will try it out on the buddy's car
The core is not "wire" any more. It's a ferrite-coated fiberglass strand, reducing radio interference while functioning as a high-voltage conductor.
Yay not a click bait video.
Why would it fail again? You did the same thing they do at the factory.
It would fail depending on the workmanship of someone doing it after watching the video
@@conesillyvalley7182 COULD fail, not would fail. And that's true of anything that anyone does on their vehicle.
The factory assembled part failed and so once you re-do it, it will fail again!
The only way to avoid failure is to pull the boot back on brand new leads, apply some super glue and put the boot back in place. Wait 12 hours and then install. They’ll never ever fail!
Cant you put some solder on that wire to the crimp after crimping, as a justin case thing?
No solder won't stick to the composite wire
Great! Just saved $60 and more work.. Now more $$ for Beer, Beer, Beer... I love Beer...
I've had luck spinning the boot to crack it free then I pull the boot and wire at the same time both hands
I've had that problem with the same spark. Plug wire same truck same everything
I need help! The connector is stuck on the spark plug and I cant remove it or remove the spark plug because the socket doesn't fit on the spark plug.
Any ideas?
Rui Carvalho Use a long thin nose type plier to pull out the connector.
@@navdeepsingh9593 Thank you ! In the end I solve it. Thanks
Should test the resistance after fixing the cable
How did you get the spark plug out tho...
with a spark plug socket.... like normal.....
@@captainboose8788 they meant how did he get it out with the metal conductor on the end which he didn’t he used pliers to pull the conductor off then pulled spark plug out and put the conductor back on for the video to show what it looks like
@@davidsimmons4491 a normal spark plug socket should have more than enough clearance to remove the plug with the connector
@@captainboose8788 mine doesn’t lol maybe it’s a Canada thing lol
Any sugggestions for divorcing the crimp from the plug? They’re not rusted or corroded but they are freaking married for eternity haha. I have the spark plug pliers, have tried twisting the wire and the spring coil, I’ve tried turning it in a wide circle, but so far the only way to get it is to eventually tear the rubber part, pull the coil, then pull off the crimp from the plug
Hey Jimmy what's up you didn't post videos for a long time
Check my video list... I've uploaded decently regularly.
Did this to my ford 2000 tractor 1967
Lol i just shoved it back in the boot
Keep your hands still! You have the shakes!!!!! Too much caffeine?
Alittle dialectic grease goes along way😀
3:56 heard that one before
My 1996 range decided to do this to me haha
Haha I am here because of my 96 Range Rover
Things are so cheaply made now. I hVe done this far too many times. When it happens I just use it as an excuse to uograde to MSD wires, coil, and maybe ignition box and distributor. But, can get away wifh just wires.