In this video i am showing you how to fully assemble a FX Dynamic and Panthera block from scratch . Use AIRBUKS10 CODE for 10% off on the new Sekmeth gauges! www.sekhmetonl...
Thank you! I watched Ernest Rowe's video on how to change barrels. After installing the pellet probe his instruction was to make sure it was seated correctly by bulling back the cocking lever to make sure it clears the magazine well, it does but it does not pull back far enough to cock. Something is stopping the lever from pulling back any further to cock. Any advise is greatly appreciated!
Mathis, your explanation is perfect and I really appreciate the time you take to explain each step, where, in other videos they don’t take time to explain very well. They move too fast because they know what they’re doing and they forget there are newcomers out here.
can you please link the vid from Ernest regarding the O-rings you were discussing at 1.15 in the vid...1st day of shooting my new King and one of the O-rings at the barrel support housing somehow got chipped and was leaking air making my last round in the magazine stuck...only way I found out was by taking the barrel out (after releasing the plenum pressure) and it was just a tiny bit of 1.4 in of o-ring right there inside the barrel at the end of it...not sure how that happen...now I'm gonna take it in for service after one 3mag shooting session...ugh
Can I permanently removed the 2 gauges with some sort of plate or other cover and just preset the reg pressure prior. I hate the look of the 2 gauges makes me feel like I’m about to do a 1/4 mile on the drag strip
great video, just watched Mr. Rowe's video, and this is where he stopped!, didn't touch the trigger block at all, apart from the regulator, maybe even for airguns you still need a gunsmith?, but still an insight into the wonderful mechanics of these things.
Thx for the support. I can’t give you a answer to that question as they implement small improvements as they go along so I don’t think there is a certain serienummer from where these parts get added
Really well done, Mathias. Thanks for putting this out for the community.
Thx mate ! I don’t know if i am a man now as I also spray painted my gun 😅👊
Beautifull, you are the Master pro, thank's a lot for this video
🤙
Can you share the deminsions of the valve seat puller please
Hi there if de gased my gun to fit a bigger bottle after assembly my gun is leaking air thru the barrel
Great video thanks buddy, when buying the block can you buy the list of parts needed as a package? For people wanting to build there own
Please help
The brass plug 19694
Can you tell me the upper diameter of it and the groove diameter where the o-ring sets ?
Thank you!
I watched Ernest Rowe's video on how to change barrels. After installing the pellet probe his instruction was to make sure it was seated correctly by bulling back the cocking lever to make sure it clears the magazine well, it does but it does not pull back far enough to cock. Something is stopping the lever from pulling back any further to cock. Any advise is greatly appreciated!
Mathis, your explanation is perfect and I really appreciate the time you take to explain each step, where, in other videos they don’t take time to explain very well. They move too fast because they know what they’re doing and they forget there are newcomers out here.
can you please link the vid from Ernest regarding the O-rings you were discussing at 1.15 in the vid...1st day of shooting my new King and one of the O-rings at the barrel support housing somehow got chipped and was leaking air making my last round in the magazine stuck...only way I found out was by taking the barrel out (after releasing the plenum pressure) and it was just a tiny bit of 1.4 in of o-ring right there inside the barrel at the end of it...not sure how that happen...now I'm gonna take it in for service after one 3mag shooting session...ugh
Mine blew out small o ring came out of valve seat striped it replaced o ring now when i presserise air comes out barrel.
aren't 'hex' and 'allen' the same? I think you meant torx
WHAT SIZE OF HEX KEY OR I THINK ITS TORX KEY
What screw ? There are many 😉
How is the bellville stacked? I cant tell sorry.
Olá amigo esse bloco tem pra vender??
Can I permanently removed the 2 gauges with some sort of plate or other cover and just preset the reg pressure prior. I hate the look of the 2 gauges makes me feel like I’m about to do a 1/4 mile on the drag strip
Hahahahah exacly my thouchts 😆😆
great video, just watched Mr. Rowe's video, and this is where he stopped!, didn't touch the trigger block at all, apart from the regulator, maybe even for airguns you still need a gunsmith?, but still an insight into the wonderful mechanics of these things.
Thx, I try my best 🤙
Nice presentation as always. Do you know from which series number they implemented the updates/improvements?
Thx for the support. I can’t give you a answer to that question as they implement small improvements as they go along so I don’t think there is a certain serienummer from where these parts get added
Helo
Ernest Rowe 🖕🏽
This is called "Master
💯
I have just ordered one. I tuck your advice. The anticipation!!!!
Nice congratulations 🎉
Would it be possible to convert a panthera to .35cal when u use the dynamic parts?
Great rebuild and explanation 👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎
Thx 👊
Thank you much appreciated 🙏
👊 thx
Hoho yes, bloody good video. 👍
Thx 👊
Perfect Details bro
Thx 🙏
Great job man 😊
Thx 👊
😂😂😂
?
Do you use facebook