Hyundai Getz Head Unit Install (Full Start to Finish)
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2020
- Complete head unit install on the Hyundai Getz!
Guys if you have any questions just drop them in the comments section!
Thank you for watching!
The tools i use:
www.shoptfb.com
GET IN TOUCH:
www.aesonline.com.au
FOLLOW ME:
/ nathanstephenss
EMAIL:
info@aesonline.com.au - ยานยนต์และพาหนะ
The trick of just chucking the cage in and bending the tabs, golden! Cheers mate!
This video really was a life saver. I initially forgot to also unclamp the cables themselves From the black bearings after taking off the loops. But when I finally did it the head unit came out easily :) Thanks again! So much fiddeling for a car stereo...
Thanks bro this is super helpful your right it is a tricky process compared to other cars
My partner cracked up immediately the moment you said “we’re about to do a head unit in one of the most deceiving cars” ahhh the perks of having a Hyundai Getz hahaha!
Thankyou so much! Great video, clearly presented. Enabled me to do this easily!
Thankyou... You made the job so much easier 👍
Thanks a lot man. Great help
Thanks for this! I was really struggling to figure it all out 😓
Thanks - that cage was flummoxing me! Very helpful video, and no unnecessary waffle.
Very helpful video, thank you
Wish I found this video like 5 months ago.
Was scratching my head trying to remove the facia panel. It was kind of loose.
Now I know how to remove it and see if there are any issues.
I unscrewed that mechanism on the right, nearly broke my neck and arms trying to get it back in. 😬
Edit: I cool it's Right hand drive as well.
Just fantastic
Epic. Thanks mate.
Hi there. Thanks for the video. My mom also have the same vehicle and I need to remove the radio in order to clean it inside. I have been using a cd cleaner but did not quite helped. I am planning to open the radio and clean thoroughly. Regards 😃
Very good explained...👏👏👏👍👍
nice video bro.i thought youre gonna remove the fascia...thats what i want to watch the next tym.im tryin to repaint the plastics inside the car.
I'll Just Follow Same Procedure By Uncliping The 3 Clips. I just Need To Replace The 2 Air Vents. Will This Be Fine?
How would you get the steering wheel controls to work? I heard the Axess SWC is the right one to use for the classic three wire analog controls but not too sure.
From what i understood all that work was because the original cage right? does that mean that if you were to replace a radio unit that's already not the original one, you won't need to do all that?
Hey bro, I got a pioneer DEH single din for my getz, but no audio is going through at all. Also tried back onto the factory audio as well, I'm not sure what I did to get no sound on either one now. I also hard-wired just as you did in the video. Could you give a lad some help? Cheers mate.
Hi where can I buy the harness adaptor for my getz
Will the steering wheel button still work?
Can you please show me in a video about how to connect SW control.. I have absolutely no idea. tried couple of time but failed. can you please make a short. video on any social media. i will follow
Anyone had problems with the factory unit sound cutting in and out randomly?
I bought a pioneer single din thinking the stock one was on its way out but had no sound at all with the pioneer and I get an amp error message and now no sound at all at all the stock unit 😑
Just put a new one in. This certainly made things easier. Glad I bought an adaptor wiring harness as well as the new stereo, just plug and play and worked first time much to my astonishment, that hardly ever happens
Hello I would appreciate it if you named the correct harness to use. Cheers
@@abettertomorrow5928 I tried but I don't think youtube will let me post the link
@@samtriglone8858 hello do you have a name of harness and part number. Hopefully I can buy one from Supercheap auto or auto barn here in Australia
seller is called adv_auto
Hi where can i buy it < i cant find it on amazon>. I live in France.
thanks a lot, I wish I would've seen this earlier, my stupid mechanic ended up cutting the fascia to remove the inner cage
SoLTY Oh no! Sorry to hear that
That's why I do EVERYTHING myself :/
Can you use the buttons on the steering wheel?
Glad I found this, I'm about to fit an amp, som components and a sub to my daughter's getz. It already has an aftermarket head unit but I'm going to have to pull it out and run rca's. Is there an easy way to run an 8 ga power wire through the firewall? I haven't as yet found a grommet to use.
They’re a pain in the backside to run powers through haha
i need a demo for the steering control..
How do you romove the wires from the back of the radio I'm stuck on there
It was a bit hard. My friend help me to do it. Get a flat head and scrape all side of the cable (the square side?) out. Hope it makes sense..
How can I install a 2 din radio?
Super helpful thank you. Did you get as far as running a Bluetooth mic in a Getz? What’s the best route to run it?
Thank you.
Martin Connolly We like to put it in the roof liner behind the mirror.
Run down passenger side behind A pillar
Behind glove box
To radio
:)
The Fitting Bay thank you legend. All in and sorted. Thanks for the vid and help 🤙🏻
I couldn't remove the fascia, because I were unable to undo the air duct flap control cable from the knob. I'd had the feeling that I was gonna break something. What's the trick?
Endre Juhász Follow instructions in the video , you need to follow the cables to what they’re driving and use small pliers
Thanks a lot for this video, it was super helpful 👍
managed to get factory cage out by just removing the glove box cable there is enough room to unscrew and flip the cage up for removal
thanks for this vid The Fitting Bay great work helped me alot
Do you know how to pull wires from the battery in to the cabin of the car ? For subwoofer?
With great difficulty
The light has gone from behind my heater controls, is this how you get to the bulb?
Yep
Hello, thank you for this awesome video! Hopefully I can follow your guidance without any problem. Do you have a recommendation for Getz 2005 budget head unit with bluetooth connection?
Kenwood :)
@@TheFittingBay thanks! I bought the Kenwood head unit, about to try to change it today. Quite nervous about it, as my friend said it might be not a good idea to do it myself haha. Just a question, I bought the harness ISO for APP095 and the APP095 cable. Will it be easy to connect them?
@@TheFittingBay update, thank you for your awesome guide! We did it ourselves successfully!! I wish you put the part where you pull all the wire out from the old head unit. It was pretty hard. Thanks again :)
@05:37 I really don't understand, if you use a converter (APP085) cable then why would you need step 2 and do some hard-wiring? Isn't it supposed to connect directy to the Kenwood device?
Great video, I was wondering. Can I fit a double din radio in there if I trim the middle piece? I think it could be very exiting to install apple carplay in my Getz from 2008. But I can't figure out if there will be enough space for this, do you know? -Thanks
Krisitan Krogsøe Hey mate! Thank you. I looked at this myself. Very close fit but I didn’t go ahead so can’t be sure. Why not go with the pioneer flip out screen?
Yeah, I looked at this flip-up screen, but I can only find some very expensive once, where the full double DIN is more budget friendly. Furthermore, the flip-up screen cover for the airflow, would it not be a problem you think? Thank you for the answer by the way.
if you trim the storage space under the factory system there is enough space to fit a double din just measure and use a rotary tool to cut the storage tray out
Awesome video m8! I just got a Getz 2006 and the radio has no AUX. I know that an AUX/USB can be installed by soldering the cables to the main circuit, do you know how to do that for this specific car? I don't want to spend money in a new head unit, I am planning to use this money on changing the door speakers for better ones (with the proper RMS) for an improved audio experience. I found that the original radio delivers 22 W RMS as many of aftermarket radio systems do, so adding better speakers should be enough to improve the audio quality. Or am I wrong?
Put your money towards a new head unit :). The factory radio delivers poor power to the oem speakers. Adding AUX won't fix the power output - but changing the head unit will. I had a Getz and installed a Kenwood single din. After tuning it was like night and day. So you can change the head unit and you mightn't even want to change the speakers after just depends how good you want it to sound. But i'd start with head unit.
@@TheFittingBay Alright bro, thanks for this, I will follow your suggestion. My intention with the AUX is being able to connect my phone to the radio, I know that it doesn't improve the power/audio quality. I don't want to spend a lot of money, my plan is having the car for a year or so before hopefully jumping to a better option. I am trying to restore this car as well I hate how people don't look after their own cars haha. I will take a look of Kenwood or Pioneer units then :)
Great video, easy to follow. I have the same car and am looking at installing similar head unit but wanting to connect the steering wheel controls, are there wires on the back of the head unit that connect to the wires and plug you didn’t use? ( I’m hoping it’s that easy)
Hey mate! Depends what unit you get. If you get something with self learning, you can hardwire it and plug it in and set the controls. Most likely you will need another module
(hardwired) if you end up going that way just comment what product you got and i can help, its fairly easy :)
@@TheFittingBay What Head unit would you recommend on a mid range budget and harness so it can be controlled with the steering wheel controls. did have in mind the ( Pioneer MVH-S425BT Double DIN Head Unit ) or (Pioneer DEH-S4250BT)
Calvin Le Roux Id go the DEH or an alpine unit.
I have Sony CDX-GT600UI, can u help me please?
Great video but why would you swap out a Bluetooth steering wheel controls deck for a non Bluetooth steering wheel control deck? If the reason is because of the pincode, I looked up online how to get that. Its as simple as using the last 4 digits of the serial number printed on the sticker on the top right hand corner of the deck and addind 1 to the first of the last 4 numbers then 2 to the 2nd of the last 4 numbers, then 1 to the 3rd of the numbers, 2 to the 4th and final number. So last 4 serial numbers XXXX + 1212 = XXXX and thats your pin code. Easier to write out the maths then the answer as your pin code.
What if i dont have a cage with the one i will replce with.?
I did a video recently installing a 10" screen in my getz. You can watch that and i explain what to do *provided you have the oem cage* if you have 0 cages you'll need to get one.
I am completely new to this sort of thing, just bought my first car and it's a good old Getz 2006. The car has no AUX tho, and I'm not too sure if it's possible to just buy a head unit with aux, and have it work? Or does the car simply not come with the ability to use AUX at all with the stock speakers and such?
If that makes any sense haha
Great video btw :)
Hey mate! So the car currently has no AUX. but if you get a single din unit with AUX and Bluetooth and follow this install method, you’ll have the features you want. Those features are only limited to the radio that is currently in there :)
@@TheFittingBay Oh okay cool, thank you for the help :D
Bit late to the party, but great video! How hard would it be to wire in the steering wheel controls to get them working with an aftermarket system?
Thanks man. Very easy :) but you’ll need a module or a unit with self learning swc
@@TheFittingBay okay awesome, thanks so much for the reply!
@@Brightside0208 all good :) I’ll do a video on it when I put a different unit in my Getz (not in this video)
@@TheFittingBay looking forward to watching this vid!
So you lose steering wheel controls.
Do the steering wheel controls work with that unit
Yes!
About to do this with my Hyundai Tucson 2009 model. Hopefully the process isn't too dissimilar!
Aaron Cheater Fairly similar, Facia has to come out to remove the cage :)
The Fitting Bay Thanks! Shame I can’t just use removal tools. I tried taking the fascia off a couple of years ago to get the code off the oem radio. Got pretty far but couldn’t get the stupid plug for the aircon control out as it was stuck. Hopefully I’ll have better luck this time!
Aaron Cheater Plastic trim tools can be very handy for that 😊
Great vid! Was just wondering what the tools you were using called?
Radio removal keys :)
4 butter knives, a small screw driver to pop off face plate on factory system, and a phillips head driver should be all you need the glove box cable can be removed with 2 hands no pliers needed there is enough movement on the facia plate when you pop it out (you can use butter knives for this) to get the screws out off factory cage and remove it with out doing the 2 cables on drivers side
@@micktaylorwolfcreekmechanical my boy
good job bro.. what did u do that original radio? i want it for my getz 😉
Haha back to the customer I think!
dear customer contact me pls 😁
I just unscrewed the clips off the side of the Getz head unit then attached them to the new Sony and clipped it back into the original cage ..
Yeah this idea should work you dont have to pull out the panel
@@ofwdad5893 yeah I had to trim them but it fit perfectly with a few measurements
Hey mate, is there any chance you can do a more in-depth section on the hard wiring? Is the wiring harness necessary? Thanks
You can jump on www.aerpro.com and buy the connectors to make it completely plug and play :)
Why not use the mounting clips from the original radio like this bloke suggests? bobparker.net.au/mp3-05g/mp3-05g.htm Is there an advantage to tossing the hyundai factory mounting? Thx
Can’t mount the radio to that cage properly. You csn slide it in but it’s not held in by anything it’s just sitting there
@@TheFittingBay the screwed in factory mounting clips don't grip do you mean?
@@TheFittingBay ok thx. Really appreciate this video. Daughter bought a Getz two weeks ago & I watched this. Yesterday bought a new head unit on special from autobarn $97. Got home watched vid again, same head unit in vid & I noticed autobarn sign on wall. Sweet mmmmm888888!
Wow
Bro.. Just a question here.. If we have to connect it with steering then how can we do it. I want to connect it to hyundai getz steering but I don't have any idea.
SWC wires go to the 2 pin plug :) I think one is SWC1 and other is GND.
@@TheFittingBay there are two wires seperately for steering wheel control. Does it have any color code or we can connect swc wire and grounded (black) wire randomly to swc 2pin plug?
@@bikimaharjan2632 random is fine. One way will work and the other way won’t lol
@@TheFittingBay LOL mate. Hope I wont blow up the fuse box :D :D :D
i blew up the fuse. mistakenly. Happy that it was not serious. Can you please help me to get it to steering wheel control mate.
Ii
I hate this car hope this video helps..😢