Doing Tone Audiometry using the AD528
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Learn the basics of doing tone audiometry using the AD528 diagnostic audiometer by Interacoustics.
Interacoustics is a world-leading diagnostic solutions provider in the field of hearing and balance assessment. We design, manufacture, and sell products across the whole audiological spectrum, from small portable devices to full clinical instruments. Our products are sold in more than 100 countries through our extensive network of sales companies and distributors.
To learn more, visit our website at www.interacoustics.com or contact your local distributor.
This is wonderful! I’m going into audiometry next semester and was nervous till I watched this :) thank you so much!
Glad to hear you found the video helpful. Good luck with the studies.
Thank you for your vidéo ! How to print result with this unit?? Doctor use diagnostic software
I found how to sent result in diagnostic suite but i can't open thé patient'sresult in diagnostic software and print on A4 Paper. Please Can you explain me thé way to print result ? Thank you
Hi there!
Please refer to the manual at:
www.interacoustics.com/images/files/manuals/en/d_0133759_a_2022_09_en_ad528_instructions_for_use.pdf
Best regards,
Shane
Hola, desde chile quisiera comprar este equipo, favor indicar pasos a seguir.
Saludos
Gracias por su interés. Por favor, póngase en contacto con su distribuidor local. Puede encontrar su distribuidor más cercano en nuestro sitio web.
www.interacoustics.com/es/contact
Comment connecter a l imprimante
Hi there!
Please refer to the manual at:
www.interacoustics.com/images/files/manuals/en/d_0133759_a_2022_09_en_ad528_instructions_for_use.pdf
Best regards,
Shane
How to check mid frequencies in AD528??
Hi there,
I suggest taking a look in the manual: www.interacoustics.com/audiometers/ad528/support
Here you will have the option to download the manual in five different languages.
ETA: this post has been edited to show the updated link/oct2023
Best regards,
Shane
@@InteracousticsTV In frequency dial am not able to change into mid frequency. only 250,500,1khz,2khz,4khz,8khz can be checked and I cross checked with manual there is no information regarding that
@@hahahehe4666 Would you have the opportunity to write to our support team at service@interacoustics.com?
This goes to a 404 page "not found" @@InteracousticsTV
wow are these really the only frequencies that can be tested? That's quite limiting for the use I have in mind (checking the hearing of sound engineers)
Не знаю английский 😂