IOT Smart Plant Monitoring System | Smart Irrigation | Using Nodemcu ESP8266 Board | Blynk
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- In this video, we will make IoT Smart Plant Monitoring System with Nodemcu ESP8266 Board..
Join my telegram channel for discussion or any problem in your Project :- telegram.me/techiqball
Buy with the link given below:-
Moisture sensor:- amzn.to/3morxuU
Humidity Temperature sensor :- amzn.to/3fKfXce
NodeMcu: - amzn.to/3urzwdt
Relay :- amzn.to/3uxSeAi
Relay Module :- amzn.to/31Xvk8Q
Mobile i use in this video :- amzn.to/3rZ8AQq
Pump + pipe : - amzn.to/3usAQg8
pump :- amzn.to/2OtmcWx
jumper wire:- amzn.to/34CPHJW
circuit diagram and code : - www.techiqbal.com/plant-monit...
00:00 video promo of plant monetering
03:25 Material needed for plant monitoring system
05:26 circuit connection of plant monitoring system
13:12 Blynk application setting for plant monitoring system
18:24 code for plant health monitoring system
Follow the Facebook Page of techiqbal for science and technology-related update:- /
join Telegram:- t.me/techiqball
website:- techiqbal.com
Follow the Instagram page of techiqbal for science and technology-related update:- techiqball?utm_...
![[IN HINDI] IOT Smart Plant Monitoring System | Smart Irrigation](/img/n.gif)
Join my telegram channel for discussion or a problem in your Project :- t.me/techiqball
Sir please give me your mobile number
This code not working
i have one quary regarding smart plant project
Excellent work,thanks
Thankyou for always being there for me and my friends.
hey can you please mail me the code file
my all the dought get solved after seeing your video
great work brother
Thank you for this project 🙏
This is a very beautiful project Sir. I'll try this DIY
i like the way you tech
thanks for this video it helps us a lot
great explanation
Bhaiya apka explain karne ka tarika bhot acha hai mene 100 channel dekhe hai but aapke jesa ni explain kar sakta koi b, thank u
Thank you❤ 😃
Good lage raho scientific boy
BITS pilani- APOGEE 2nd position holder. 🙌🏻💥💥🔥🔥 KEEP IT UP👍🏻
Thank you 😊
Good Job sir
ohooo bhai jabardast
This is an excellent video on Iot based plant and irrigation module. You make an ordinary man a techie. So easy and simple narration with close ups.
Reall a great approach brother.keep up the good works. Thank you.
Thank you❤
thanks a lot its working with no problems you guided me finally my project is working once again thanks a lot
hey can you please mail me the code file
@@ajinkyapathare5014 do one thing just remove " this and re edit with " and replace it all do it and compile it.it will work
@@adarshkumarragula5544 bro please send ur eamil id . i need some help in this project
Can i contact u brod please help me bro
@@adarshkumarragula5544my motor is not turning on and display not showing anything.can you help.its urgent
Amazing ❤️❤️❤️🔥🔥🔥
Thanks 😊
For the relay, Is it okay if I using the SRD-06VDC-SL-C 5pin PCB instead of the Mini 5V DC Power Relay SRD-5VDC-SL-C 5 Pin PCB you listed above???
Thank you sir for your video i got full marks in my final year project
Welcome
Love this video
thnaks bro your video helped me a lot !!
sir, exactly Working your this Project ??
hey can you please mail me the code file
Hi how do you justify reason for using temp and mositure sensor. I am doing same project with raspberry pi I don't know what are the things that I can add
output=(145-map(sensor,0,1023,0,100)); // please explain how did you know that you have to subtract with 145 to get correct moisture reading ?
This is something bhai
We did this project and really worked so good so thanku for providing such a good information it really helped
Thank your 🥰
apko koi error nhi aya kya??
Sir, exactly Working your this Project ??
@@nainap22 library me a rahi he. Na...
I don't know why but only pump is not working can to help me in this?
I want some idea how to fit some machinism in agricultural fields to prevent crops from insects, birds etc. My current project automatic water irrigation by IOT but i want add that feature
Please make video blynk 2.0 on this project what changes are essential to make
is it okay if I use capasitative soil moisture and dht 22 sensor?
Can u suggest plants that can be grown in 2 weeks?
MashaAllah brother
I'm studying agriculture engineering can we do this project as mini project ?
Can we use aurdino uno instead of nodemcu
Brother in the blynk app.......Now there is nothing named nodemcu then should i choose ESP8266 instead?? and will it work?
can u add rain sensor with it
bahut khub
Thank you
Where can i buy the board to stack the circuit?
Sir how can I get download libraries option , in mobile
Which language is used for coding part?
Sir led light use nahi kare to chalega kya?
Because I want to show in my school tomorrow
Hi bro
I have different relay so can u tell how to do it
Sir, how to replace the relay with relay module......please provide connections
Which type of jumper wire you have used
Female- Female
Male-Male
Male- Female
Sir now blink aap has been updated so how should we work on this if we want to make this project
Blynk app new version ka download ho raha hai play store plzzz help me how to connect nodee mcu esp8266 with blynk iot app
Hlo sir.....sir blynk app is not showing the option "create a new account"....what can we do now
Can you provide libraries links.please.
Sir we are doing this projects in code side we are face an error the error is sketch_mar04n.ino:10:14: error: universal character \u201d is not valid in an identifier what is the problem sir
Sir i also want the data logging. Please tell me how to do it please 🙏 it's urgent
bro its new blink app how i can denote the last digital pin
Bro how to turn on again I am doing this project as main project I don't know how to show them when it will get turn off and turn them also it will connect to wifi how we are going to do it
Cai I use espe32 instead of esp8622
Sir to which pin of node MCU should we connect the "vcc" and "in" points of relay module
See in video
Can give me definition of this project
1-Bhai isme cooler me use hone wala bada pump b use ker sakte h kya.
2-Isme ek vantilation fan add kar sakte h for cooling if temperature rise.
3- or humidifier add ker sakte h kya is humidity rise.
Please make a new project loaded with all these functions -perfect for small terrace garden green house
yes
Can we skip moisture sensor
Esp32 node mcu ka use kr ke yeh project connection ka circuit diagram provide kijiye sir 🙏🙏
@Techiqbal sir I also want to show output to LCD also. So can I do that??
Yes you can do that👍
@@Techiqbal Sir I'm getting error while connecting to LCD would you please help me with the programming part. Or would you please send me code of LCD or any website resources so that I can go through that please.
@@sahilkamble8750 send me the error sc in Instagram or telegram channel- t.me/techiqball
@@Techiqbal Okay Sir I've messaged you on telegram on Techiqbal discussion forum. Please check and let me know.
Sir, this topic is good for electrical engineering final year project
Yes
Final year ? Lol this is good only for 1st or 2nd year
Hi bro
I couldn't control motor using buttons in blynk app, it is not working. What should I do?
same problem
How can we add raspberry pi in this project
My Nodemcu is connecting to internet but it is not showing online in blynk application kindly give any solution
Sir agar sirf readings display karne honge toh relay connect karna hoga kya ?
Nai sirf reading display k lia relay connect karna jaruri nhi hai
Ok. Thank you sir
Aap relay module ke sath bhe ek video banayain Khali relay nahi
Sir I am getting the hard Resting RTS pin what should I do to resolve this sir can u please reply.
That is not an error see the program that you upload in esp8266 board is working or not. I am sure it will work. It is the bug of Arduino ide that the text is showinng in red color that's why we think that is error but it is not error.
All the best 👍
Like and subscribe our channel and switch on the notification icon🥰🥰
please give all the components names briefly what ever used in this project(include small things )and model names of that components also
please respond as early as possible
yes me too
Given in the description box. For more query join the telegram channel link given in description box
some items only given ,i mean smaller things are not given ..so give me the each and every component name with models including wires also and i was already joined in the telegram channel ..so please give in that
bhaiyya can you please host a meeting, for some doubt clearing in this project .
Message me telegram group
I had made this project 3 years ago but did not upload it on yt
Can anyone please send the link of the app used here?
Sir coding me koi foult Nahi na
Sir, this project for electrical or electronic students
For both
Bro does this project will be accepted as final year main project
yes
Sir,can I use my 5V, 700mA phone charger to give nodemcu supply.
Yes
Bro led nhi mention hai description m
can you please provide this blynk app link
the relay isn't working with 3v output of nodemcu
Video kafi jaankari wala Hai lekink aap ne jo component list dikhaye usmain aap relay module dikha rahe hain aur circuit aap relay ke sath Bata rahe hain jisse dikkat aa rahi hain samjhne main please relay module ke sath ek video jaroor banane ka kast kijiyega, dhanyvad
Will this project work if we use 5v relay module to turn on motor
yes
I'm preparing the project now..everything is correct but I don't know why when I open blynk app it says wasn't online yet
Re-install and setup the app
Same problem here
sir code is compiling but not uploading....???
Instead of power bank what we can use any suggestions .
battery you can use
Sir I am getting this error while uploading the code.......please resolve it..............
esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header
bro this is not working for 5v relay module
I would do this what you have exactly done but relay module is not working and soil moisture not showing i used node mcu esp8266
join telegram and send video
Hii sir the new version of Blynk app is not the same as your version can you please teach how to make these settings in new version of Blynk app please
Same here I am also facing this & my project is yet not completed
Sir maine blynk sin up Kiya but muze Aut tokan Nahi Aaya muze
Hi. How to make this automatic like if moisture level falls below certain value then pump would switch on and would stop after certain level?
I will make the video soon👍
@@Techiqbal Bhai kbtk aajaegi video??
@@nischalsingh5556 inshaAllah before the end of this month
@@Techiqbal okay
@@Techiqbal abhi tak nahi aayi ye wali video bhai kab aayegi
Sir I want to help u
Jumper wire kaun sa lena hai male to maile Or male to female??
amzn.to/34CPHJW
Price kitna a raha hei? Total?
Sir, I have connected node mcu to relay module, green led light is blinking but, motor is not working(motor alone if connected to battery is working) Could you please resolve my issue..
solution given in telegram group
best project thank you. please if i would like to use this project on one hectare of land how to increase soil humility sensors. so that it detects humidity on a point X, a point Y and also a point Z.
hey can you please mail me the code file
Aruido based chahiye tutorial
maine coding aur conccection kar diya hai , but blynk app me setting kaise kare
, new Updated app me Kuch samaj nahi aa raha hai
Bada water pump use kar sakte hai kya
Yes
@@Techiqbal I need your help. I am an agriculture engineering student I want to do this project as a final year project. But I didn't know anything about coding and connections. So how to contact you when I have any doubt.?
Kya project successful ho jayega?
You can join the telegram group there you can contact me
Link given in description box📦
Can we use Arduino UNO instead of NodeMCU?
Will it work properly?
Then you have to use Bluetooth module or wifi module with arduino .
Yes it will work
@@Techiqbal Sir I'm using Arduino UNO instead of NodeMCU and with it I'm also using wifi module. But I'm not able to connect wifi module to Arduino UNO. Please help sir if possible.
Hello @Rakib Sadman
have you done the project with Arduino UNO. If yes please help me also in doing that.
Sir apne breadboard kyu nhi liya
What is the solution can you pls tell sir?
Isme buzzer lagake automatic alert add kr skte kya matlab agar moisture level bahut kam ho toh buzzer bajna chahiye and hame msg ya notification ana chahiye or automatic pump on hona chahiye aaisa kr skte kya
haan wo easily ho jaega. app graph bhi dikha skate.,message alert bhi add kr sakte ho.
@@Techiqbal kaise kre
@@nainap22 dekho blyn me hi option aata hai notification ka aur buzzer k lia 5-6 line code likhna padega. ho jaega easy hai
@@Techiqbal ok i will try