How nice is it to think you will need to do something elaborate as a solution yet come up with such a simple idea that will work break. Makes one feel good when that happens. I could feel your joy in coming up with that idea
don't do it!! I started building things using air cylinders now I can't stop!!! Door clamping table, and shaper coping sled. The cylinders are so cheap on ebay to. The Air clamps are next waiting for 10' coiled hose though!!!Been waiting months for it to come instock. I wanna build a pneumatic vise and a pneumatic pocket hole machine that mimics the castle!! have fun man!!
@@derekmoen5382 Amazon had a few sets. May have one or two more. I’ve been waiting almost 10wks for the air cyclinders to arrive. Just need to machine the slide mounts.
@@derekmoen5382 I agree once I got the slider the cam clamps and Kreg bits were nice but I have since seen way to many videos people using air clamps and have found where they would also increase accuracy it was game over.
So I can now see how these clamp are used and I guess you would not need to worry about kick back too with using those clamps plus it keeps your hands free and clear. btw nice job on the clamp mod!
Nice going David. I’m actually in the middle of building a similar clamp, but with the ability to lock the clamp in place with the use of a Kipp lever. It will make things faster during production ripping for me.
Thanks Tundra Whisperer. I’m sure you’re talking about something more complicated too. I just can’t believe how simple this was to do. And it works so well.
Great idea! I just realized the other day you can buy thin pvc strips with adhesive on one side . That would be good on the bottom of your Kreag clamp to keep from scratching your top.
These saws cost anywhere from 12k and up to a boat load. Lol. Go online and see the pricing from websites. Depending on models and options you’ll see prices all over.
How nice is it to think you will need to do something elaborate as a solution yet come up with such a simple idea that will work break. Makes one feel good when that happens. I could feel your joy in coming up with that idea
Guy you’re so right. It was like an epiphany. And so easy. Thank you for watching.
Very clever solution, significantly smoother then the original clamp!
Thanks Christian. I am so happy with it.
Nice. I have used them on my slider and they work well. I have however started building a set of air clamps
Thank you Stan. Air clamps seem pretty complex.
don't do it!! I started building things using air cylinders now I can't stop!!! Door clamping table, and shaper coping sled. The cylinders are so cheap on ebay to. The Air clamps are next waiting for 10' coiled hose though!!!Been waiting months for it to come instock. I wanna build a pneumatic vise and a pneumatic pocket hole machine that mimics the castle!! have fun man!!
@@derekmoen5382 too funny. It sounds like you’re hooked on it. I’ll bet they’ll all be great when you’re finished.
@@derekmoen5382 Amazon had a few sets. May have one or two more. I’ve been waiting almost 10wks for the air cyclinders to arrive. Just need to machine the slide mounts.
@@derekmoen5382 I agree once I got the slider the cam clamps and Kreg bits were nice but I have since seen way to many videos people using air clamps and have found where they would also increase accuracy it was game over.
So I can now see how these clamp are used and I guess you would not need to worry about kick back too with using those clamps plus it keeps your hands free and clear. btw nice job on the clamp mod!
Hey thanks my good buddy in Tennessee. I’m glad you watched it. These are great clamps Johnny. Seriously.
Nice going David. I’m actually in the middle of building a similar clamp, but with the ability to lock the clamp in place with the use of a Kipp lever. It will make things faster during production ripping for me.
Thanks Tundra Whisperer. I’m sure you’re talking about something more complicated too. I just can’t believe how simple this was to do. And it works so well.
Great idea! I just realized the other day you can buy thin pvc strips with adhesive on one side . That would be good on the bottom of your Kreag clamp to keep from scratching your top.
Yes you’re right. Those would be good to protect. Thankfully the kreg clamps already have them on the bottoms. lol.
@@davidbryanwoodworksandmore even better!
@@rodpotts2666 absolutely. Thanks Rod.
I've been using uhmw tape a lot for these kinda things works great and lasts forever!!
what did you put at the bottom of the bench clamp, looks like some sort of Teflon tape or low friction material?
The protective tape that the clamp comes with. That’s all.
If you dont mind me asking how much does saw like that cost
These saws cost anywhere from 12k and up to a boat load. Lol. Go online and see the pricing from websites. Depending on models and options you’ll see prices all over.
@@davidbryanwoodworksandmore thank you is it a single phase or 3 phase
@@ermesarredondo2528 single. I go over all of my requirements on the first video of the installation of the saw.