When I went into an arcade, I was going straight for Outrun or Pole Position. Hearing "get ready to qualify", INSTANTLY brought me back to childhood. Great restoration on one of the best games ever made.
I cannot express how much I enjoy what has at this point become an entire restoration series. Can't wait to see the next project, and anything else you have in mind for the channel.
When I'm frustrated or spending hour after hour editing video and trying to make it just the way I want, it's definitely worth it knowing that there are people out there who can enjoy my long, drawn-out journeys with these games, and all the silliness that goes with it. I hope to keep creating this kind of content as long as I can keep finding interesting things to feature. Thanks so much for the kind words!
@tcurtis49 I can guarantee a lot of people love them consider yourself the ultimate in long form restoration on arcade machines ..........would love an outrun with mechanical base or a sit down star wars. ❤
This video is the definition of Grit ❤ I also love how you are showing all the setbacks and showing how you still can succeed if you just don't give up 😊
Did I expect to spend my Sunday watching a 2 hour restoration video? No. Did I enjoy every minute of it? Absolutely. Well done, Tod. Love your channel!
Haha. Do I expect anyone to watch any of my silly long restoration videos? No. Do people watch them anyway? Apparently! Thanks for the compliment and glad I could provide a little entertainment for you :)
Glad you enjoyed it. I try to keep it pretty straightforward and detail the thought process. My next video will cover just about every aspect of a restore, for sure :)
protip on the pin extractor- hold onto the wire from the back, and push it into the connector, then press the extractor into the housing, while pushing on the wire. this will make it significantly easier. otherwise, the barbs on the pin will dig into the plastic and making it difficult to remove. if done right it should take almost no pressure to remove the pins. if the barbs dig in you might have to press the wire into the housing with needle nose pliers.
For someone who confesses not to be a professional and does this for a hobby, you do a better job at this than some of the so called professional restorers' that I watch. Great job on this. I played this game so much back in the day! :o)
I’m kind of weird because I’m a perfectionist but a realist. I’d like for things to be perfect but I also want to maintain some of the flaws that make a game original. So there’s always a balance between the two. I also like to try new approaches just for the sake of seeing what works and I’m sure some more experienced restorers shake their heads watching me fumble along but that’s part of my fun. I appreciate everyone’s kind words and glad to see people enjoying it.
I just started watching your video's, started off with Tron and now this. You have amazing patience and skills. I enjoy your video's and whilst amazingly detailed and lengthy I like the extra time and appreciate the efforts you have done
Hey Tod! I hope you see this comment, But i was watching your Tron restoration yesterday and watched your Red Tent video today. I saw an Atari Race Drivin in the background.... and thats when it hit me. I thought to myself I remember seeing that carpet, and that minty restored race drivin on KLOV. I SOLD YOU THAT GAME! I hope you're still enjoying it!!
It’s still running great! If I run out of current projects I might do a retrospective on it since it was a bit of a crazy restoration. I still don’t know how we got it loaded on that trailer-it weighs a ton!
Have you ever attempted to restore a vintage HIFI receiver and speakers? A lot of your skills are directly transferable. I have the exact same desoldering pump and multimeter. I splurged on a hakko soldering iron and it is an excellent tool.
It's wild to me how well evaporust works. I was looking for something to remove rust off the metal shielding and screws on a vintage keyboard. Didn't want to use an aerosol can product because I didn't want to fill the screw holes. Tested out the evaporust at someone else's suggestion and crazily 4 hours of soaking later the rust was gone. Also, yes it does eat through plating and coating. Which is fine in most cases because the rust probably ate through it first. Just means the plating or coating will need to be reapplied or some other type of protection is needed if you want to prevent the rust from coming back.
It is a amazing product, it is completely harmless for most plastics and metals, but it will destroy stainless steel, AISA 304 at least the 316 type is better resistant against it. I work at the company that makes it and you don't want to know how we found out 😅😅
That’s correct. In my other videos I should look more like someone who knows what they are doing. This was kind of a weird situation spot painting here and there. Thanks!
Thanks for throwing in enough parts to make it happen :) It worked out well and was fun to tinker with. I hadn’t planned on keeping it but we are having a lot of fun with it in the arcade.
Thanks! I’m on it but it will be a bit. I wasn’t expecting these to be so popular so suddenly and have been focusing my time on my console collection. But I do have new arcade projects that should make for a couple of interesting videos this summer.
I’ve been binging your videos for a bit now and you’re doing some incredible work here. Just a tip, but you should try some Ospho on the corroded bare steel parts. I use it all the time in automotive restorations for neutralizing rust. It should also protect your parts before you’re ready to paint them as well.
Thanks! I'm experienced but not expert--there are some really knowledgeable people out there and I've seen some really impressive work. I'm good at trial and error, though, and usually find my way through projects :)
Wow, thanks! For a guy with a tripod and Adobe Premiere and no real experience working in the arcade repair business, I’m doing my best :) Maybe someday!
@@tcurtis49 All I see is professional enough to be on Netflix, and homemade enough to get connected with the creator and the content. It feels like those reality shows that I love to watch, that portray everything in a "real life" vibe. I stumbled upon your channel a few days ago and I am hooked! I now have hundreds of hours to watch haha keep up the great job mate.
I already have :) Sometime I might make a retrospective video because it was a major restoration. And a surprise one, as I had no idea that was what was originally in a cabinet I bought.
I’m 15 and genuinely enjoy this I love older items as I have restored a vhs tape rewinder which has turned into a hobby of mine and honestly I would love to own a arcade cabinet as they would be fun for me to restore and for my parents to enjoy using.
2nd video of yours I've seen now. I love the content, your content is honest and genuine in every way. Enjoy your arcade, you have clearly put the work in to enjoy it. I saw the tron video. I didn't think it could he saved when I first saw it. Never saw tron in an arcade but remember playing pole position lots.
That’s very kind. I definitely started doing these just to entertain and show what the process is like for me. I knew it would be different than what people are used to but after putting the Red Tent video together (my first big one) I hoped at least some people would enjoy the longer journey. And it looks like there is an audience for it, which is great :)
@tcurtis49 you defo have an audience. Please keep doing what you do. And please enjoy playing the crap out of those things once you've fixed them! Closest I mostly get now is retropi! These things need preserving for future generations, I respect what you are doing very much and want to see your arcade grow.
How come you Americans have such massive houses !! Definitely makes me want to leave UK. Great video series. I love pole position on mame as I could never afford a real cabinet. Looking forward to following your channel 😀
Thanks! We have a lot of room to spread out and in rural areas like mine every house needs to be on sizeable land for septic systems, etc, so houses tend to be big. Especially in the midwest where nearly everyone has a basement. Pole Positions are readily available around here-seems like I see them for $400-600 quite often. Definitely a classic!
Found your channel as a suggestion. I'm 60 and I played most of these games, Pole Position, Zaxxon, ZooKeeper, and Galaga being my favorites. Fun to watch you restore these old favorites. Keep up the good work!
Thanks! I’m 52 so many good childhood memories for me as well. Makes finding and fixing these extra special. Zookeeper…hmmm…maybe you’ll see something related in a video this year…. :)
Yes, it is still behaving! After I finished everything I directly wired the 5V and Ground to test points on each board to help bulletproof things and it has continued to work great. It is indeed still fun to play, even after all these years :)
I was Born in 2002. My parents allways have the NES with the Tripple disk Mario, Tetris and Football. Thats my only ponit, near this things. But I love, watching you restore these old arcade games. They look so nice. (And I have never open an old tv or so, all of that was before me 😅😂)
I'm guessing we're about the same age. I was never an avid arcade goer back in my HS days (early 80s), but I do remember Defender. I would pump a few quarters into that one.
Pole Position was a favorite of mine back in the day. I loved the sit down version the most as I always seemed to score higher. Other favs were Robotron 2084, Defender 1 and 2, Missile Command and Star Wars.
I played a lot of Pole Position as racing games were my favorite. I have a Robotron and that game is really tough! But fun :) The others are classics that are always on my radar. Thanks!
The cigarette burns... It was probably in a bar, or pool hall, etc. I grew up on arcade games in arcades, gas stations, restaurants, and bowling alleys. I spent many nights playing street fighter, mortal kombat, killer instinct, and more with a cigarette hanging out of my mouth in my teenage years.
Oh, yeah, for sure. These games were everywhere and smoking was far more common back then. I was just admiring those burn marks a few days ago while moving machines around :)
Good morning, sir. I must say that I'm absolutely thrilled to have found your channel. I'm an electronics enthusiast by night and a builder by day. I just wanted to say that I really appreciate your attention to detail, and it is so great to see these games being saved and given a second chance at life. Thank you for the wonderful content and your hard work in bringing it to us. Keep it up, and have a great day. Thanks.
Outstanding! Love your restoration videos. Way to bring that classic back from it's rusty, dusty, nasty grave. It seems to want to keep one foot in that grave though with every time you turn it on! It was both funny and frustrating to see the continuous errors with the board! Your patience is amazing. I would have looked at the power supply and behind the marquee and said "Nope, no way!" You said "challenge accepted!" Hope you get another 40 years of play out of it!! Thanks for the T-molding tip about the electrical tape. I built a replica of the Star Wars Arcade cockpit (put a pc for emulation, video on my page) and had a bit of trouble with some molding fitment on the back side sharp angles. I'll try that trick and find some black brad nails to finish it up nicely.
Thanks! Yeah, I can be really patient when working on these projects as I know once they are done then life gets boring again :) It was getting funny to me how crazy the boards would behave--I had to cut out a ton of it particularly around the time of the vertical lines because it was just too much back and forth between working and not working. Right now they seem to be solid so replacing the chip I burned up was probably the right solution anyway. The T-molding tip works pretty well for sure. I read that one a long time ago and have done it many times. It was also funny that I went through 95% of my T-molding application with everything perfect then the last little bit got me. Pretty much summarized every aspect of fixing up the game!
Just made it to the end. Everything was right about this video; content, excellent storytelling, engaging, well edited, good video quality, etc (I definitely could go on.) I absolutely love your home arcade. I think I know what my first retirement project will be. Again, thank you for putting a smile on my face for nearly 2-hours. Can’t wait to go through the rest of your videos. 😊
Go find a fun arcade project and play around with it :) There are a ton of resources online and it is a great hobby. And enjoy the other videos-Tron and the RedTent were pretty insane compared to this one :)
I've enjoyed a couple of your restorations now and really enjoyed your attention to detail. If I could make one small suggestion though. When you're replacing discrete components, such as your capacitors, it's very bad technique to bend the legs over. It makes it harder to remove them, should the need arise, and I would have gotten a severe ear bashing from my Air Force instructor if I'd done that myself.
Totally get that and it is more of a pain when I redo someone else’s work. I do trim them pretty flush and when I’ve had to remove some that I put on in the wrong spots it’s never been trouble. I don’t know how else to put on a bunch, then solder a bunch, without doing that…or to keep them from slipping back out of the slots. I am definitely detail oriented and that’s partially due to my profession. The little details make all the difference. Thanks!
I found myself clapping and cheering as you brought it back to life at each milestone. As a 50+ year old male who enjoyed this when it was first released and came to my local 7-11 in a small East Texas town outside of Tyler, Tx, I really want to thank you for this excellent video and adventure. You’ve demystified one of my favorite childhood memories. I really appreciate you sharing this. Subscribed!!
I cannot believe you got that running again. I thought this was a lost cause early on. Glad you stuck with it! Pole Position was one of my favorites back in the day
Awesome build! Pole position was the closet thing to real racing up to that point. it was so realistic for the times. I would spend all my money I made from being a paperboy on it. Now I'm addicted to sim racing.. It would be so cool to have one of those, it brings back great memories.
Another fantastic full restoration. Definitely a lot of work, those old boards when they get a bit of corrosion and/or battery damage can be a challenge for sure. An absolute classic game that will definitely get some play I am sure.
I think the cigarette burns lend historical significance. I've watched this and your TRON restoration. I subscribed because your work is outstanding. Thank you for doing these.
You're the real deal, entire package, Tod! Cabinetry, paint, woodwork, mechanical, and electronics. Kudos on a pitch perfect restore. Imo, keeping original artwork warts and all is important history vs painting over large sections. You did just enough touch up, no more. Only place I disagree are the particle board replacements like the top rear handle panel. I would have replaced with plywood for load bearing parts like handles. The back door is just a cover, not load bearing so ok with particle board there.
Thanks! And fair enough on particle board vs plywood-which I do normally switch to for cabinet bases and so on-but here a small enough piece to be strong as long as it doesn’t succumb to moisture damage again. Glad you enjoyed it and every restore is a personal learning experience for sure :)
When will the next restoration video be up and I cannot wait to see which game it is I'm from the UK and we don't get these kind of games I live the methodical approach and the way the videos are edited keep up the good work.i just built a table top arcade and used a raspberry pi and it will do for now..
I appreciate the compliments! I just picked up a couple of projects the week before last that will be my focus for a while. My channel suddenly became popular so I will have to get moving on them pretty quickly. Tabletop arcade sounds fun-I’ve had some MAME machines in the last that provided a lot of entertainment.
Another great video on restoration!! Please post more… it seems there are only 2 and I’ve learned so much!! Would love to see anything else you e worked on. Thank you for such detailed, high quality videos ❤
Tron, Pole Position, and Red Tent are the 3 major restorations. There is also a nice video on a Sega store display cabinet. I’m working on projects now so more videos to come :) Thanks!
That was an AWESOME video! I really do love how you walk through the different steps and explain the chips and little tricks you've learned along the way of other video restoring! Helpful if I ever lose my mind and decide to tackle a video arcade restoration,
Man I just LOVE your restoration videos. The editing, the attention to detail. I love it all. Awesome job fighting through the board issues too! It all looks great.
Much appreciated! There was a ton of footage on this one and it was hard to decide what to include and what to discard. In the end I want to be educational for anyone wanting to understand the process but upbeat enough to keep the videos fun. Glad you enjoyed it!
I usually don't write a lot of TH-cam comments, but you sir, you've earned it! I just stumbled across your channel and the amount of skill in every field (electrical engineering, carpentry, paint jobs etc.) is amazing and very satisfying to watch. Keep up the good work! Hoping to see more brilliant arcade cabinet restorations in the future. Greetings from Germany.
@@tcurtis49 A good friend of mine and fellow collectors has three arcade cabinets in his possession. Klax, Xybots and Hang On. Some years ago we also had a TH-cam channel for retro gaming stuff and we did reviews of the cabinets. Looking forward to your upcoming projects.
I just happen to be working on not one, not two, but three separate projects of varying difficulty right now. All of which fell into my lap last weekend. One could be epic, one is straightforward, and the other is more console gaming than arcade. I may be able to bridge the gap with some shorter videos featuring interesting restores from my past…
I love this sort of content. I love retro video games of all kinds as well. Is that a whole house dedicated to arcade cabinet space? That is so sick and makes me jealous! 😂 Great work and great content. Look forward to watching more of these.
Great! I’m glad to be able to entertain. You can see the whole collection on a walkthrough video on my channel. The entire house is not dedicated to it, but it’s getting close :)
LOVE THE VIDEOS ... KEEP THEM COMING ... have you got a Q-Best machine ??? ... that was my game ... literally could put one quarter in and play for hours and hours (but usually gave up after 30-40 minutes) ... as far as the sit-down version of Pole Position having more speakers, I think those were heavy bass speakers, to give you a "rumbling" feeling when you went off course or got into an accident
I do have Q*bert! One of my favorites and a game I’m actually pretty good at as well. It has the cool feature of a pinball knocker low in the cabinet that clanks like Q*bert is hitting the bottom of the cabinet when he falls off the grid. Working on some fun projects right now. Thanks!
Great restoration. If I had all the quarters I spent playing this game I could probably buy one now. This was certainly one of my favs. But my game was Ms. Pacman.
Keeping those wonderful 80s old games running will be a chore in itself. You are young and dedicated though. An arcade room operator would be proud of your accomplishments 🥂 I used to like to do that stuff, I’m retiring soon.
People tell me all the time to use my games to open an arcade. Keeping games running is a non-stop task-there’s almost always something wrong with at least one game. I cross my fingers every time I power them up that they’ll all come on. So you know the reality of it and I couldn’t agree more :)
I just bought a baby pacman yesterday, it worked today. Then i tried to move it to its final home (3 feet away) and it died. This is my first machine, so I'm glad to see other people have issues with this too. It's super discouraging
@@tcurtis49 i'm cleaning the boards soon, do you have any advice for preserving the labels on the PCBs? It's mostly just stuff like who inspected it but it's still pretty cool and I'd like to keep them, but I'm not sure I'll do that and clean the boards
I'm watching you work on the wiring and I wanted to comment. I know this isn't normal, but having worked at Boeing for 15 years I've become a real proponent of having a text label on each wire (covered by clear heat shrink) detailing what the wire's function is. Something to think about! On my home automotive projects I've started using that practice with a Brother labeling machine and clear heat shrink. That's really worrisome that if the MOSFET fails, it can fry the rest of the board with 15V. Why isn't there a Zener or something to clamp the output to something safe? When you go over any logic boards, you might want to look very closely for any tantalum capacitors. Unlike ceramic capacitors, their failure mode is to short rather than fail to an open circuit. If your multimeter ever shows a short between 5V and ground, those are often a culprit.
Sounds like Boeing needs you now more than ever :) Usually I print the wiring diagram from the manual and it’s not too hard to keep track of everything, especially since many wire colors are used fairly universally for voltages and ground. And being 18 gauge a little hard to label, but still would be nice. It is a bad design on the AR boards and my Battlezone did indeed send that voltage to the logic boards last summer, resulting in months of detective work replacing what it zapped. There is also a sense circuit to up the voltage when it gets low that will overreact when the edge connector contact is bad and burn up a resistor. Some people have made mods to avoid that scenario, while others prefer to let it work as intended. Tantalum caps are definitely a problem on some games more than others. On my Gorf they were. huge issue, and definitely short to ground. All good tips and keep in mind I’m always learning as I go, so they are much appreciated!
Thank you very much. I'm enjoying all your videos. Your patience in disassembling old wrecks in order to get the best possible authentic restoration is amazing.
I worked in the arcade game industry back in the day for 15yrs, repairing, maintaining and upgrading games. BTW, My favourite upgrade was the Hard Drivin' EPROM update.. Anyway, we bought 5 units of Pole Position right when it was released originally @ $5K CAD per unit (in 1982!) and placed 1 each in our favourite arcades. They were labour intensive because we would have to go 2-3x per week to EMPTY the full cash boxes (which hold ~$1200 in quarters) because the full cash boxes would actually cause the coin mechs to jam up ! It was an amazing game at the time, first real first-person type racing game. Prior to PP, all racing/car games were top-down view games. In our experience, the game was pretty robust, not requiring much in the way of maintenance, the biggest issue was the gear change micro-switches, the encoder on the wheel held up really well. But the cool thing was that folk used the cowling over the controls to place quarters reserving the next game, needed because there were actual line-ups to be able to play, sort of the same way that folk reserve games on coin-op pool tables. Yeah, fond memories. But if you want a suggestion, get your hands on a Hard Drivin" sit-down cabinet. There are some really cools stories about how Atari developed that game, to the point where some employees at Atari actually learned to drive a manual transmission IRL by playing the game (!!), you could actually stall the engine in the game using the clutch improperly ! and the force-feedback wheel was a first. Just a great game, one of the absolute best IMHO.
That’s awesome! And I have a full cockpit Race Drivin’ that I fully restored a few years ago. Works beautifully. You can catch a glimpse of it in my video game collection tour video :)
@@tcurtis49 Yeah, sorry to bombard you with that long story, but I have fond memories of the games. One place I worked at even got raided by the RCMP for selling grey market PCB's, LOL. And I still have the JAMMA wiring harness pin-outs committed to memory.
Thanks! I’m always learning new tricks along the way and that’s what makes it so much fun. I just picked up a project today (a couple, actually) so hopefully more content coming soon :)
Haha! Skelly usually hangs from a tree by the road for Halloween with a plastic sword in his hand. We were glad he could stick around and play games with us :)
Only found your channel yesterday and watched this and your Tron restorations, both of which I really enjoyed. Absolutely top class restoration work and your videos are really well put together too. You deserve so many more subscribers! Looking forward to watching more of your content :)
Thanks so much! You’ll probably enjoy the Nintendo Red Tent as well- It’s similar to the other two. I’m glad people are watching and am hard at work on multiple projects right now :)
Great job Tod! Your attention to detail and skill make for excellent restorations. As a fan of the movie Airplane, I appreciate the subtle innuendos. 😂
I might, but after adjusting everything it’s not particularly noticeable. And it’s just a faint Game Over near the bottom. I tried to get an additional Matsushita monitor running to try in but it had numerous issues. I am probably going to leave it as is.
Can I recommend a small mirror on a small stand in front of the monitor for when you turn on the juice, that way you can watch the circuitry and see if the monitor lights without being in front of it? Great video, enjoying my childhood. Thanks.
I do that sometimes. I have a mirror from my childhood that I’ll get out of the drawer and set up. Essential on many cabinets when adjusting the colors, etc. Good tip! And glad you like the videos!
When I went into an arcade, I was going straight for Outrun or Pole Position. Hearing "get ready to qualify", INSTANTLY brought me back to childhood. Great restoration on one of the best games ever made.
Fantastic! Thank you so much for your time and dedication to restore these beautiful old Arcade cabinets from a golden time in history.
Thanks! It’s so much fun reliving that era working with these games :)
I cannot express how much I enjoy what has at this point become an entire restoration series. Can't wait to see the next project, and anything else you have in mind for the channel.
When I'm frustrated or spending hour after hour editing video and trying to make it just the way I want, it's definitely worth it knowing that there are people out there who can enjoy my long, drawn-out journeys with these games, and all the silliness that goes with it. I hope to keep creating this kind of content as long as I can keep finding interesting things to feature. Thanks so much for the kind words!
@tcurtis49 I can guarantee a lot of people love them consider yourself the ultimate in long form restoration on arcade machines ..........would love an outrun with mechanical base or a sit down star wars. ❤
This video is the definition of Grit ❤
I also love how you are showing all the setbacks and showing how you still can succeed if you just don't give up 😊
Thanks! More videos coming soon and I had plenty of setbacks along the way. All part of the fun!
Did I expect to spend my Sunday watching a 2 hour restoration video? No. Did I enjoy every minute of it? Absolutely. Well done, Tod. Love your channel!
Haha. Do I expect anyone to watch any of my silly long restoration videos? No. Do people watch them anyway? Apparently! Thanks for the compliment and glad I could provide a little entertainment for you :)
This is so thorough. Should be a training film.
Glad you enjoyed it. I try to keep it pretty straightforward and detail the thought process. My next video will cover just about every aspect of a restore, for sure :)
protip on the pin extractor- hold onto the wire from the back, and push it into the connector, then press the extractor into the housing, while pushing on the wire. this will make it significantly easier. otherwise, the barbs on the pin will dig into the plastic and making it difficult to remove. if done right it should take almost no pressure to remove the pins. if the barbs dig in you might have to press the wire into the housing with needle nose pliers.
Thanks for the tip! I’ll keep that in mind next time i’m struggling with one :)
This was AWESOME. Great job on having a killer game in an even more killer arcade!
Thanks!
You're a true inspiration to many. Keep it up!
Dude your videos are so much fun to watch. You need to do more of these.
I am. Expect 3 or so bigger videos this year. I had a busy spring and summer :)
You have become my favorite channel on here. Awesome work!
Thanks! Working on interesting projects right now so hopefully several more videos this year. If I can ever get them done…always new challenges :)
Brilliant stuff, excellent work and very entertaining. Hat off to you Sir.
Epic rebuild... thanks for sharing👍
Thanks for watching!
Glad you popped up as a suggested video. Im very meticulous like you, so its satisfying to see such a detail oriented restoration. Subscribed!
I definitely like to take my time and do it as best I can, which can sometimes really drag out a project. But feels good once it’s done :)
For someone who confesses not to be a professional and does this for a hobby, you do a better job at this than some of the so called professional restorers' that I watch. Great job on this. I played this game so much back in the day! :o)
I’m kind of weird because I’m a perfectionist but a realist. I’d like for things to be perfect but I also want to maintain some of the flaws that make a game original. So there’s always a balance between the two. I also like to try new approaches just for the sake of seeing what works and I’m sure some more experienced restorers shake their heads watching me fumble along but that’s part of my fun. I appreciate everyone’s kind words and glad to see people enjoying it.
Amazing video and restoration! Looking forward to more videos from your channel!
Thanks! Definitely more to come-I’m deep into 3 projects at the same time right now. Hopefully they will all make for entertaining videos :)
Hi from Brazil! You work is amazing!!
Hello from so far away. I’d love to go down there sometime. Thanks!
I love theses videos. If you ever do any more long form arcade restoration vides i am game
I’m early on another long project so may do some console-related videos next but there will definitely be more. Thanks!
@@tcurtis49 They are worth the wait for sure
this and your Tron video are fantastic. Good, long, detailed, all mistakes (learnings) left in. So fun to watch and I learn a lot!
Glad you enjoyed it! I don’t mind making mistakes and I don’t want people to think everything just happens perfectly. That’s certainly not reality :)
I just started watching your video's, started off with Tron and now this. You have amazing patience and skills. I enjoy your video's and whilst amazingly detailed and lengthy I like the extra time and appreciate the efforts you have done
Thanks! Glad you enjoy them :)
Hey Tod! I hope you see this comment, But i was watching your Tron restoration yesterday and watched your Red Tent video today. I saw an Atari Race Drivin in the background.... and thats when it hit me. I thought to myself I remember seeing that carpet, and that minty restored race drivin on KLOV. I SOLD YOU THAT GAME! I hope you're still enjoying it!!
It’s still running great! If I run out of current projects I might do a retrospective on it since it was a bit of a crazy restoration. I still don’t know how we got it loaded on that trailer-it weighs a ton!
Have you ever attempted to restore a vintage HIFI receiver and speakers? A lot of your skills are directly transferable. I have the exact same desoldering pump and multimeter. I splurged on a hakko soldering iron and it is an excellent tool.
No, I haven't. But I have certainly messed with a lot of different electronics over time. Maybe someday!
Awesome job!
Thanks!
It's wild to me how well evaporust works. I was looking for something to remove rust off the metal shielding and screws on a vintage keyboard. Didn't want to use an aerosol can product because I didn't want to fill the screw holes. Tested out the evaporust at someone else's suggestion and crazily 4 hours of soaking later the rust was gone. Also, yes it does eat through plating and coating. Which is fine in most cases because the rust probably ate through it first. Just means the plating or coating will need to be reapplied or some other type of protection is needed if you want to prevent the rust from coming back.
It is pretty amazing, especially given that it isn’t dangerous to work with. And reusable :)
It is a amazing product, it is completely harmless for most plastics and metals, but it will destroy stainless steel, AISA 304 at least the 316 type is better resistant against it. I work at the company that makes it and you don't want to know how we found out 😅😅
When painting, use sweeping movements, even in small areas. Start spraying outside the part and stop after you've passed the part.
That’s correct. In my other videos I should look more like someone who knows what they are doing. This was kind of a weird situation spot painting here and there. Thanks!
This is my dream cabinet. Nice job!
I always liked Pole Position but didn't realize how much I wanted to keep one until I got this project. It's got a permanent spot in the arcade :)
Great job on the restoration. Thanks for taking that ol pole position off my hands. Glad it found a good home.
Thanks for throwing in enough parts to make it happen :) It worked out well and was fun to tinker with. I hadn’t planned on keeping it but we are having a lot of fun with it in the arcade.
Snatched from the jaws of the crushers! You are so lucky to be able to restore these arcade cabinets. Thanks for sharing.
Thanks!
I've got one in my garage that's rotten about as bad or worse than the Tron cab you restored! The bottom is completely gone and it's about to implode!
It seems like a common problem for those-poor design. I hope you can salvage something from it!
I love this!! Need More!!!
Thanks! I’m on it but it will be a bit. I wasn’t expecting these to be so popular so suddenly and have been focusing my time on my console collection. But I do have new arcade projects that should make for a couple of interesting videos this summer.
I’ve been binging your videos for a bit now and you’re doing some incredible work here. Just a tip, but you should try some Ospho on the corroded bare steel parts. I use it all the time in automotive restorations for neutralizing rust. It should also protect your parts before you’re ready to paint them as well.
I will definitely give it a try. Thanks!
My only issue is that you are an expert at this point! Idont know how you could be better at doing these things.. im impressed!
Thanks! I'm experienced but not expert--there are some really knowledgeable people out there and I've seen some really impressive work. I'm good at trial and error, though, and usually find my way through projects :)
All this restoration content could easily become a Netflix show. Super entertaining videos my friend. 😊
Wow, thanks! For a guy with a tripod and Adobe Premiere and no real experience working in the arcade repair business, I’m doing my best :) Maybe someday!
@@tcurtis49 All I see is professional enough to be on Netflix, and homemade enough to get connected with the creator and the content. It feels like those reality shows that I love to watch, that portray everything in a "real life" vibe.
I stumbled upon your channel a few days ago and I am hooked! I now have hundreds of hours to watch haha keep up the great job mate.
i enjoy watching your videos. I hope you will restore my favorite arcade game, Robotron 2084
I already have :) Sometime I might make a retrospective video because it was a major restoration. And a surprise one, as I had no idea that was what was originally in a cabinet I bought.
I’m 15 and genuinely enjoy this I love older items as I have restored a vhs tape rewinder which has turned into a hobby of mine and honestly I would love to own a arcade cabinet as they would be fun for me to restore and for my parents to enjoy using.
Absolutely. That would be cool-I hope you find an arcade project to work on :)
@@tcurtis49 I hope I do just have to get the money to eventually work on one
The only one I found on Facebook marketplace was pole position which I wouldn’t personally mind
2nd video of yours I've seen now. I love the content, your content is honest and genuine in every way. Enjoy your arcade, you have clearly put the work in to enjoy it. I saw the tron video. I didn't think it could he saved when I first saw it. Never saw tron in an arcade but remember playing pole position lots.
That’s very kind. I definitely started doing these just to entertain and show what the process is like for me. I knew it would be different than what people are used to but after putting the Red Tent video together (my first big one) I hoped at least some people would enjoy the longer journey. And it looks like there is an audience for it, which is great :)
@tcurtis49 you defo have an audience. Please keep doing what you do. And please enjoy playing the crap out of those things once you've fixed them! Closest I mostly get now is retropi! These things need preserving for future generations, I respect what you are doing very much and want to see your arcade grow.
How come you Americans have such massive houses !! Definitely makes me want to leave UK. Great video series. I love pole position on mame as I could never afford a real cabinet. Looking forward to following your channel 😀
Thanks! We have a lot of room to spread out and in rural areas like mine every house needs to be on sizeable land for septic systems, etc, so houses tend to be big. Especially in the midwest where nearly everyone has a basement. Pole Positions are readily available around here-seems like I see them for $400-600 quite often. Definitely a classic!
Found your channel as a suggestion.
I'm 60 and I played most of these games, Pole Position, Zaxxon, ZooKeeper, and Galaga being my favorites. Fun to watch you restore these old favorites.
Keep up the good work!
Thanks! I’m 52 so many good childhood memories for me as well. Makes finding and fixing these extra special. Zookeeper…hmmm…maybe you’ll see something related in a video this year…. :)
Perfect timing! Just picked one up in about the same condition. Great job on the video!
I hope it works out for you as well as it did for me, but maybe with a few less headaches!
Maybe you should open a novelty arcade with those machines in it
That would be so cool but so much work keeping the games going, Maybe someday!
Top job. Did it stay behaving? It is a brilliant game still in my book.
Yes, it is still behaving! After I finished everything I directly wired the 5V and Ground to test points on each board to help bulletproof things and it has continued to work great. It is indeed still fun to play, even after all these years :)
I was Born in 2002. My parents allways have the NES with the Tripple disk Mario, Tetris and Football.
Thats my only ponit, near this things.
But I love, watching you restore these old arcade games. They look so nice.
(And I have never open an old tv or so, all of that was before me 😅😂)
Thanks!
I'm guessing we're about the same age. I was never an avid arcade goer back in my HS days (early 80s), but I do remember Defender. I would pump a few quarters into that one.
I always tried Defender when at the arcade but it took my quarters way too fast. Tough game!
Pole Position was one of my favorite arcade games as a kid/teenager in the 1980's.
Pole Position was a favorite of mine back in the day. I loved the sit down version the most as I always seemed to score higher. Other favs were Robotron 2084, Defender 1 and 2, Missile Command and Star Wars.
I played a lot of Pole Position as racing games were my favorite. I have a Robotron and that game is really tough! But fun :) The others are classics that are always on my radar. Thanks!
The cigarette burns... It was probably in a bar, or pool hall, etc. I grew up on arcade games in arcades, gas stations, restaurants, and bowling alleys. I spent many nights playing street fighter, mortal kombat, killer instinct, and more with a cigarette hanging out of my mouth in my teenage years.
Oh, yeah, for sure. These games were everywhere and smoking was far more common back then. I was just admiring those burn marks a few days ago while moving machines around :)
Good morning, sir. I must say that I'm absolutely thrilled to have found your channel. I'm an electronics enthusiast by night and a builder by day. I just wanted to say that I really appreciate your attention to detail, and it is so great to see these games being saved and given a second chance at life. Thank you for the wonderful content and your hard work in bringing it to us. Keep it up, and have a great day. Thanks.
Thanks so much!
Awesome restoration and the countless problem solving involved. I was born a year after this game released, but remember it from the movie D.A.R.Y.L.
Thanks! I don’t think I ever saw the movie but that’s a cool reference:)
Another great project video Tod! Can't wait to see what's next for you and the fam. ♥
Thanks so much!
Really impressed with the PSU resto part with the new coating, looked great.
It’s crazy, right? I couldn’t believe the before and after pics. It was a cool process. Thanks!
Awesome. Thanks a lot for the video, really amazing to watch how you go through the entire process. Amazing.
Thanks!
Outstanding! Love your restoration videos. Way to bring that classic back from it's rusty, dusty, nasty grave. It seems to want to keep one foot in that grave though with every time you turn it on! It was both funny and frustrating to see the continuous errors with the board! Your patience is amazing. I would have looked at the power supply and behind the marquee and said "Nope, no way!" You said "challenge accepted!" Hope you get another 40 years of play out of it!!
Thanks for the T-molding tip about the electrical tape. I built a replica of the Star Wars Arcade cockpit (put a pc for emulation, video on my page) and had a bit of trouble with some molding fitment on the back side sharp angles. I'll try that trick and find some black brad nails to finish it up nicely.
Thanks! Yeah, I can be really patient when working on these projects as I know once they are done then life gets boring again :) It was getting funny to me how crazy the boards would behave--I had to cut out a ton of it particularly around the time of the vertical lines because it was just too much back and forth between working and not working. Right now they seem to be solid so replacing the chip I burned up was probably the right solution anyway.
The T-molding tip works pretty well for sure. I read that one a long time ago and have done it many times. It was also funny that I went through 95% of my T-molding application with everything perfect then the last little bit got me. Pretty much summarized every aspect of fixing up the game!
Just made it to the end. Everything was right about this video; content, excellent storytelling, engaging, well edited, good video quality, etc (I definitely could go on.)
I absolutely love your home arcade. I think I know what my first retirement project will be. Again, thank you for putting a smile on my face for nearly 2-hours.
Can’t wait to go through the rest of your videos. 😊
Go find a fun arcade project and play around with it :) There are a ton of resources online and it is a great hobby. And enjoy the other videos-Tron and the RedTent were pretty insane compared to this one :)
More more more! I love your epic resto videos. And congratulations on your best back door of 2024 award!
More definitely coming…in the midst of some major restores right now :)
And haha!
Loving the mix of restoration, history, and learning a little bit about electronics. Very entertaining and informative.
Thanks! That’s my goal-I hope you like the other ones and I’m currently working on some interesting projects.
One of the first driving games I played by as a kid loved it
My first racing game I played was Night Driver, which was black and white. Then a lot of Sega Turbo.
I've enjoyed a couple of your restorations now and really enjoyed your attention to detail. If I could make one small suggestion though. When you're replacing discrete components, such as your capacitors, it's very bad technique to bend the legs over. It makes it harder to remove them, should the need arise, and I would have gotten a severe ear bashing from my Air Force instructor if I'd done that myself.
Totally get that and it is more of a pain when I redo someone else’s work. I do trim them pretty flush and when I’ve had to remove some that I put on in the wrong spots it’s never been trouble. I don’t know how else to put on a bunch, then solder a bunch, without doing that…or to keep them from slipping back out of the slots.
I am definitely detail oriented and that’s partially due to my profession. The little details make all the difference. Thanks!
Hi Tod. Loving the videos. Very well made, enjoyable and informative. You’re a lucky guy!
Thanks! I definitely am lucky and happy to share that joy with others. Glad you like the videos!
Wow! Awesome job. My first arcade cabinet restoration back in the day was a Pole Position and this really took me back.
That’s cool! And thanks!
I found myself clapping and cheering as you brought it back to life at each milestone. As a 50+ year old male who enjoyed this when it was first released and came to my local 7-11 in a small East Texas town outside of Tyler, Tx, I really want to thank you for this excellent video and adventure. You’ve demystified one of my favorite childhood memories. I really appreciate you sharing this. Subscribed!!
Much appreciated! There’s just something about the era we grew up in that was so much fun. I’m glad you enjoyed the journey back in time!
100% leave those cigarette burns. Adds so much to the patina. The history and culture is very much a part of these games. Great job!
Thanks!
Spot on.
Cig burns. Mild scratches on the sides, etc are part of the history of the piece.
I cannot believe you got that running again. I thought this was a lost cause early on.
Glad you stuck with it! Pole Position was one of my favorites back in the day
It’s a great game but definitely tested my patience :) Thanks!
Thanks once again Tod for this project, i have to say that you are at the Pole Position ! Great job :)
Thanks :)
I see for wood glue you use Titebond II. I find that Titebond III is much better, you should give it a try.
Absolutely. I’ve got a project that will need some here soon so I’ll give it a go :)
Awesome build! Pole position was the closet thing to real racing up to that point. it was so realistic for the times. I would spend all my money I made from being a paperboy on it. Now I'm addicted to sim racing.. It would be so cool to have one of those, it brings back great memories.
It's still a very fun racer. Fast-paced and requires quick reflexes. Thanks!
Thanks for posting in such detail. This gave me plenty of ideas for projects of my own!
Thanks-glad it might help!
Insane amount of patience and unparalleled tenacity for troubleshooting! Another amazing resto! Great work. START YOUR ENGINES!!!!
Another fantastic full restoration. Definitely a lot of work, those old boards when they get a bit of corrosion and/or battery damage can be a challenge for sure.
An absolute classic game that will definitely get some play I am sure.
Thanks! And it does get a lot of play :)
I think the cigarette burns lend historical significance. I've watched this and your TRON restoration. I subscribed because your work is outstanding. Thank you for doing these.
Thanks! And I agree :)
You're the real deal, entire package, Tod!
Cabinetry, paint, woodwork, mechanical, and electronics.
Kudos on a pitch perfect restore.
Imo, keeping original artwork warts and all is important history vs painting over large sections. You did just enough touch up, no more.
Only place I disagree are the particle board replacements like the top rear handle panel. I would have replaced with plywood for load bearing parts like handles. The back door is just a cover, not load bearing so ok with particle board there.
Thanks! And fair enough on particle board vs plywood-which I do normally switch to for cabinet bases and so on-but here a small enough piece to be strong as long as it doesn’t succumb to moisture damage again. Glad you enjoyed it and every restore is a personal learning experience for sure :)
When will the next restoration video be up and I cannot wait to see which game it is I'm from the UK and we don't get these kind of games I live the methodical approach and the way the videos are edited keep up the good work.i just built a table top arcade and used a raspberry pi and it will do for now..
I appreciate the compliments! I just picked up a couple of projects the week before last that will be my focus for a while. My channel suddenly became popular so I will have to get moving on them pretty quickly. Tabletop arcade sounds fun-I’ve had some MAME machines in the last that provided a lot of entertainment.
Skelly watched you paint that back door a dozen times -- he earned his gaming session!
Lol I went way too far with the paint...should have just gone with the first coat :)
Another great video on restoration!! Please post more… it seems there are only 2 and I’ve learned so much!! Would love to see anything else you e worked on. Thank you for such detailed, high quality videos ❤
Tron, Pole Position, and Red Tent are the 3 major restorations. There is also a nice video on a Sega store display cabinet. I’m working on projects now so more videos to come :) Thanks!
That was an AWESOME video! I really do love how you walk through the different steps and explain the chips and little tricks you've learned along the way of other video restoring! Helpful if I ever lose my mind and decide to tackle a video arcade restoration,
Thanks! That one wasn’t too bad-if you want to see me losing my mind watch the Tron and Nintendo Red Tent restorations :)
As always, love your videos Tod. The back door turned out nice, as did everything!
Thanks Kim!
Looks great Tod, enjoyed the whole process of the restore. Keep up the great work.
Thanks! It was strange in many ways but good experience working through it!
very nice video!
Thanks!
Man I just LOVE your restoration videos. The editing, the attention to detail. I love it all. Awesome job fighting through the board issues too! It all looks great.
Much appreciated! There was a ton of footage on this one and it was hard to decide what to include and what to discard. In the end I want to be educational for anyone wanting to understand the process but upbeat enough to keep the videos fun. Glad you enjoyed it!
Im binge watching your content, your restorations really relax me
Glad you like them and glad it can help you chill out.
I usually don't write a lot of TH-cam comments, but you sir, you've earned it!
I just stumbled across your channel and the amount of skill in every field (electrical engineering, carpentry, paint jobs etc.) is amazing and very satisfying to watch.
Keep up the good work!
Hoping to see more brilliant arcade cabinet restorations in the future.
Greetings from Germany.
Thanks! I’ve got 3 really cool projects all going at once, so more videos to come :) Thanks for watching from way over in Germany!
@@tcurtis49 A good friend of mine and fellow collectors has three arcade cabinets in his possession.
Klax, Xybots and Hang On.
Some years ago we also had a TH-cam channel for retro gaming stuff and we did reviews of the cabinets.
Looking forward to your upcoming projects.
I hope you have another resto going on. If so maybe release a project in 1/4 segments so we don't have to wait so long for a new video. ;-)
I just happen to be working on not one, not two, but three separate projects of varying difficulty right now. All of which fell into my lap last weekend. One could be epic, one is straightforward, and the other is more console gaming than arcade. I may be able to bridge the gap with some shorter videos featuring interesting restores from my past…
I love this sort of content. I love retro video games of all kinds as well. Is that a whole house dedicated to arcade cabinet space? That is so sick and makes me jealous! 😂 Great work and great content. Look forward to watching more of these.
Great! I’m glad to be able to entertain. You can see the whole collection on a walkthrough video on my channel. The entire house is not dedicated to it, but it’s getting close :)
LOVE THE VIDEOS ... KEEP THEM COMING ... have you got a Q-Best machine ??? ... that was my game ... literally could put one quarter in and play for hours and hours (but usually gave up after 30-40 minutes) ... as far as the sit-down version of Pole Position having more speakers, I think those were heavy bass speakers, to give you a "rumbling" feeling when you went off course or got into an accident
I do have Q*bert! One of my favorites and a game I’m actually pretty good at as well. It has the cool feature of a pinball knocker low in the cabinet that clanks like Q*bert is hitting the bottom of the cabinet when he falls off the grid. Working on some fun projects right now. Thanks!
Great restoration. If I had all the quarters I spent playing this game I could probably buy one now. This was certainly one of my favs. But my game was Ms. Pacman.
Haha. And Ms PacMan is certainly great as well! Thanks!
Keeping those wonderful 80s old games running will be a chore in itself. You are young and dedicated though. An arcade room operator would be proud of your accomplishments 🥂 I used to like to do that stuff, I’m retiring soon.
People tell me all the time to use my games to open an arcade. Keeping games running is a non-stop task-there’s almost always something wrong with at least one game. I cross my fingers every time I power them up that they’ll all come on. So you know the reality of it and I couldn’t agree more :)
I just bought a baby pacman yesterday, it worked today. Then i tried to move it to its final home (3 feet away) and it died. This is my first machine, so I'm glad to see other people have issues with this too. It's super discouraging
That’s a cool game and I’ve tried to get one several times. But prone to problems. Hopefully you’ll get it sorted out quickly :)
@@tcurtis49 i'm cleaning the boards soon, do you have any advice for preserving the labels on the PCBs? It's mostly just stuff like who inspected it but it's still pretty cool and I'd like to keep them, but I'm not sure I'll do that and clean the boards
I'm watching you work on the wiring and I wanted to comment. I know this isn't normal, but having worked at Boeing for 15 years I've become a real proponent of having a text label on each wire (covered by clear heat shrink) detailing what the wire's function is. Something to think about! On my home automotive projects I've started using that practice with a Brother labeling machine and clear heat shrink.
That's really worrisome that if the MOSFET fails, it can fry the rest of the board with 15V. Why isn't there a Zener or something to clamp the output to something safe?
When you go over any logic boards, you might want to look very closely for any tantalum capacitors. Unlike ceramic capacitors, their failure mode is to short rather than fail to an open circuit. If your multimeter ever shows a short between 5V and ground, those are often a culprit.
Sounds like Boeing needs you now more than ever :)
Usually I print the wiring diagram from the manual and it’s not too hard to keep track of everything, especially since many wire colors are used fairly universally for voltages and ground. And being 18 gauge a little hard to label, but still would be nice.
It is a bad design on the AR boards and my Battlezone did indeed send that voltage to the logic boards last summer, resulting in months of detective work replacing what it zapped. There is also a sense circuit to up the voltage when it gets low that will overreact when the edge connector contact is bad and burn up a resistor. Some people have made mods to avoid that scenario, while others prefer to let it work as intended.
Tantalum caps are definitely a problem on some games more than others. On my Gorf they were. huge issue, and definitely short to ground.
All good tips and keep in mind I’m always learning as I go, so they are much appreciated!
Thank you very much. I'm enjoying all your videos. Your patience in disassembling old wrecks in order to get the best possible authentic restoration is amazing.
Thanks! Glad you like them. I’m in the middle of a couple of wrecks right now :)
I'm so glad I found your channel... You're living my dream!
Cool!
I worked in the arcade game industry back in the day for 15yrs, repairing, maintaining and upgrading games. BTW, My favourite upgrade was the Hard Drivin' EPROM update..
Anyway, we bought 5 units of Pole Position right when it was released originally @ $5K CAD per unit (in 1982!) and placed 1 each in our favourite arcades. They were labour intensive because we would have to go 2-3x per week to EMPTY the full cash boxes (which hold ~$1200 in quarters) because the full cash boxes would actually cause the coin mechs to jam up !
It was an amazing game at the time, first real first-person type racing game. Prior to PP, all racing/car games were top-down view games. In our experience, the game was pretty robust, not requiring much in the way of maintenance, the biggest issue was the gear change micro-switches, the encoder on the wheel held up really well.
But the cool thing was that folk used the cowling over the controls to place quarters reserving the next game, needed because there were actual line-ups to be able to play, sort of the same way that folk reserve games on coin-op pool tables. Yeah, fond memories.
But if you want a suggestion, get your hands on a Hard Drivin" sit-down cabinet. There are some really cools stories about how Atari developed that game, to the point where some employees at Atari actually learned to drive a manual transmission IRL by playing the game (!!), you could actually stall the engine in the game using the clutch improperly ! and the force-feedback wheel was a first. Just a great game, one of the absolute best IMHO.
That’s awesome! And I have a full cockpit Race Drivin’ that I fully restored a few years ago. Works beautifully. You can catch a glimpse of it in my video game collection tour video :)
@@tcurtis49 Yeah, sorry to bombard you with that long story, but I have fond memories of the games. One place I worked at even got raided by the RCMP for selling grey market PCB's, LOL. And I still have the JAMMA wiring harness pin-outs committed to memory.
It's amazing how much of a difference something as simple as the display bezel makes immersion wise.
Great vid. 👍
I really enjoyed this. Thank you so much for your content and all the hard work you put into this.
It’s all rewarding if people are entertained :) Thanks for the kind words!
I've watched all your restore videos this weekend. Very satisfying and I appreciate watching so I can learn from you. Keep them coming, amazing jobs!
Thanks! I’m always learning new tricks along the way and that’s what makes it so much fun. I just picked up a project today (a couple, actually) so hopefully more content coming soon :)
Skelly has incredibly realistic eyes. I thought they were real at first before remembering it’s not a suit. Pretty creepy! 1:54:03
Haha! Skelly usually hangs from a tree by the road for Halloween with a plastic sword in his hand. We were glad he could stick around and play games with us :)
If you alternate directions when spray painting it will help reduce the tiger striping effect. Looks great in the end though after all that work lol
I will on my next project for sure. Thanks!
Only found your channel yesterday and watched this and your Tron restorations, both of which I really enjoyed. Absolutely top class restoration work and your videos are really well put together too. You deserve so many more subscribers! Looking forward to watching more of your content :)
Thanks so much! You’ll probably enjoy the Nintendo Red Tent as well- It’s similar to the other two. I’m glad people are watching and am hard at work on multiple projects right now :)
@@tcurtis49 I'll get on that one this evening! Cheers and all the best!
Okay the skeleton at the end putting his initials in cracked me up 😂
Lol all this time and nobody has ever commented on the extra stuff after the credits :)
Great job Tod! Your attention to detail and skill make for excellent restorations. As a fan of the movie Airplane, I appreciate the subtle innuendos. 😂
Thanks, man! Roger, Roger!
Great episodes. Are you planning on doing a tube swap down the road since you mentioned some burn-in?
I might, but after adjusting everything it’s not particularly noticeable. And it’s just a faint Game Over near the bottom. I tried to get an additional Matsushita monitor running to try in but it had numerous issues. I am probably going to leave it as is.
Can I recommend a small mirror on a small stand in front of the monitor for when you turn on the juice, that way you can watch the circuitry and see if the monitor lights without being in front of it? Great video, enjoying my childhood. Thanks.
I do that sometimes. I have a mirror from my childhood that I’ll get out of the drawer and set up. Essential on many cabinets when adjusting the colors, etc. Good tip! And glad you like the videos!