When you wired these are you using a dpdt rocker switch and if so did you get this to work on 1 relay or did you need to run 2 for high and low beam? Thanks
Can ams put to much heat in cab from factory design which is why the intakes are there. Blocking them in this manner could increase heat in warm temperatures 😅
I have the same set up and had to change the mounting of LP6's. Radiator wasn't getting enough air so temps were increasing significantly. Changed the radiator out to a TCP Mudder style as well (triple bypass) and upgraded the fan as well.
@@jeremyspielmann3821did this fix it ? I have the mudder edition too but it was repaired , I run pretty hot so I’m seeing if I need to buy a new TCP with an upgraded fan
Does your canam over heat since it’s blocking some of it? Also what brackets did you use on the squadrant pros
When you wired these are you using a dpdt rocker switch and if so did you get this to work on 1 relay or did you need to run 2 for high and low beam? Thanks
We’re did you get the squadron brackets on the mirrors ?
I'm debating on getting lp6 flood/spot. Or just spot
Go with the flood/spot.
@@dustydesertadventures490 you have spot right
@@cautionontherun30 I had spot lenses on during the video but have since switched them out to the combo lenses.
Are the lp6 spot?
Clean set up!
Thanks!
I like this design 😀
Thanks! It was easy to do.
Can you post the link for the plugs? Or the name?
www.amazon.com/Plastic-Tubing-Outside-Diameter-Furniture/dp/B07849VTWD?ref_=ast_sto_dp
Thank you!
Can ams put to much heat in cab from factory design which is why the intakes are there. Blocking them in this manner could increase heat in warm temperatures
😅
I monitor engine temp in the middle of summer in Vegas and have never had an issue. But we don’t ride dunes.
Can ams put to much heat in cab from factory. Covering intakes this way could make matters worse in warm temperatures
I have the same set up and had to change the mounting of LP6's. Radiator wasn't getting enough air so temps were increasing significantly. Changed the radiator out to a TCP Mudder style as well (triple bypass) and upgraded the fan as well.
@@jeremyspielmann3821did this fix it ?
I have the mudder edition too but it was repaired , I run pretty hot so I’m seeing if I need to buy a new TCP with an upgraded fan