Over the years I acquired and sold some really old and unique items that would have increased tremendously in value if I had been skilled at engraving. Now, nearing the end of my time it's a bit too late to start learning. But, watching your videos gives me the pleasure of seeing how my ideas would've turned out if I had your skills at a younger age and that pleases me immensely!
I made one from a vibro engraving tool with the pointy bit ground to a flat chisel edge........I used it for getting into small places to remove burrs.........I think it can also be used to impress or punch a design like numbers or letters into soft metal like copper, aluminium or even brass.
Gracias por enseñar como hacer u na herramienta de estas, mi duda es, tengo que modificar el compresor para que impulse y succione o simplemente funciona con aplicar aire a la herramienta? Agrdesere tu informacion, saludos
Gracias por su atención a mi trabajo. Gracias por tu comentario. Este neumograbador funciona con presión de aire constante. Para esta herramienta, no necesita rehacer el compresor. Pero este grabador neumático se hizo solo como un experimento. No fue duradero.
Gracias por su atención a mi trabajo. Gracias por el comentario. Los orificios de aire en el pistón se superponen y se abren alternativamente a medida que se mueve el pistón. Por lo tanto, el aire se redirige al área debajo del pistón, luego al área por encima del pistón. Así es como se mueve el pistón.
Good night, I have a doubt. I see some videos that use a modified compressor to pull and push the piston and yours is just compressed air. how did you do it? I'm racking my brains a lot.
You did it nicely. It is good to use the already existing tools and redo a little. This idea has long been developed with large pneumatic hammers. Steve Lindsay did it perfectly (perfectly). Only his products are terribly expensive. I also did it out of curiosity and this is an excellent method. I used an sds drill to make the piston. I hardened, drilled and hardened. But now I'm using Sergei Valtman's graver system.
somewhat similar to the physics for tattoo machines, instead of electric hidraulic, but the funny thing, the most similar thing in common, is how noisy both methods are hehehe, I wonder how far is it possible, at that scale, just using compressed air, having features that would allow control the strength and depth of the cut - so beautiful stuff there ))) keep it up
How does the mechanism work? I don't understand how it reciprocates, unless you put a spring back in. A close-up or assembly video with explanation would be amazing. Thanks!
Thank you for your attention. A spring is not needed in this design. I put it as an addition. The principle itself is that air passes through the holes in the piston, and moves the piston up and down. In one of the following videos, I will probably make a detailed analysis of this mechanism and make a drawing.
@@KirillRunz I am looking forward to more information on how the air makes the piston move up and down. I have looked at the video several times and I can not figure it out.
Air pushes into the chamber inside the brass handle, filling that chamber and pushing out the spring-assisted-return internal "pin". The pin moves forward and releases chamber air through it's forward hole, letting it return into the brass chamber, to get pushed forward again and release air.....
Muchas gracias por su respuesta tan valiosa, funciona como un martillo neumatico, tengo los planos de un grabador neumatico en AUTOCAD, es cuetion de llevarlos con un tornero, cuendo guste se los comparto, en air graver estan muy pero muy caros, estoy para servirle
Bonjour ! Super vidéo et bonne idée de détourner un le pointeau automatique pour ta réalisation. Elle à l'air de bien fonctionner pourtant tu ne semble pas satisfais. Aurais tu des plans pour cette réalisation j'aimerais tenter cette l'expérience mais je ne comprends pas le cheminement de l'air dans l'outil pour le va et vient avec un flux d'air constant ? Bonne continuation.
Thank you for your attention to my work. It was just an experiment. This tool did not work for long. Thank you for your offer, but I do not make such tools in series.
I have watched videos like this trying to discover if the air source is alternating or direct pressure. Many of them are alternating and they show you how to modify a tyre inflator to provide alternating pressure. But it seems hardly anyone comments on the way the engraver works. In this video you make it clear a larger compressor is better but does it provide normal direct air pressure or have you modified it to supply alternating pressure? Is there such a thing as a direct pressure engraver?
Excelente, se ve bueno. Lo intentaré, creo que intentaré replicarlo. Cuánto PSI usas para su funcionamiento? Haz fabricado algún pedal para accionarlo? Muchas gracias por compartir tu fabricación.
I could figure out most of it. Just that where is the location of the hole in the body for air inlet ? Does the piston cross it? If you could just show a hand drawing of the working mechanism, would be great. Rest of the video is self explanatory. Cheers.
Да красавиц Чего говорить.Да кстати вопрос Кирилл Подскажи как убрать вонь с железа после травли в солёной воде ,ато кухонный топорик испортит всё мясо😁😁
Я много мою металл в содовом растворе, а потом обрабатываю маслом, вонь после травления уходит но запах масла появляется:))) Можно попробовать чем-то пахучим намазать.
Smart dude. Good video. Love it when there’s no talk and especially no stupid music. Good job young man. Thank you
Over the years I acquired and sold some really old and unique items that would have increased tremendously in value if I had been skilled at engraving. Now, nearing the end of my time it's a bit too late to start learning. But, watching your videos gives me the pleasure of seeing how my ideas would've turned out if I had your skills at a younger age and that pleases me immensely!
Its never too late to do what you want. I hope you can achieve and make beautiful things in your time..
I beg you to try anyway! Dont live with the what if!
Never too late
Дааааа, ну ты камрад КРАСАВА. Умница. Успехов.
Omg. Genius! Pure genius! Amazing to witness such creativity!!!
Привет из Новороссийска!
Ставлю лайк не досмотрев до конца!
Ещё один привет из Новороссийска👋👍
Спасибо за Ваше внимание. Привет из Сум.
И ещë один привет из Новороссийска, не ожидал.
I made one from a vibro engraving tool with the pointy bit ground to a flat chisel edge........I used it for getting into small places to remove burrs.........I think it can also be used to impress or punch a design like numbers or letters into soft metal like copper, aluminium or even brass.
Gracias por enseñar como hacer u na herramienta de estas, mi duda es, tengo que modificar el compresor para que impulse y succione o simplemente funciona con aplicar aire a la herramienta? Agrdesere tu informacion, saludos
Gracias por su atención a mi trabajo. Gracias por tu comentario. Este neumograbador funciona con presión de aire constante. Para esta herramienta, no necesita rehacer el compresor. Pero este grabador neumático se hizo solo como un experimento. No fue duradero.
Fantastico! Pero no llego a entender como el embolo sube y baja con un chorro de aire continuo...
Gracias por su atención a mi trabajo. Gracias por el comentario. Los orificios de aire en el pistón se superponen y se abren alternativamente a medida que se mueve el pistón. Por lo tanto, el aire se redirige al área debajo del pistón, luego al área por encima del pistón. Así es como se mueve el pistón.
Good night, I have a doubt. I see some videos that use a modified compressor to pull and push the piston and yours is just compressed air. how did you do it? I'm racking my brains a lot.
Brilliant. I bought a few of these punches a while ago with a view to attempting this, but never got round to it. Thanks for sharing how you did it.
Thank you for your attention. I wish you creative success.
Seems we like same things 😂😂😂😂😂
@@henrysscrollsawworks6917 Seems so 😂 We both turn up in some pretty obscure places too. lol
@@danceswithaardvarks3284 it's all good lol
Обожнюю ваші роботи, дивлюсь кожне відео. Бажаю натхнення для інших прекрасних ідей :)
Дякую Вам за увагу.
Отлично.Сколько вариантов видел на просторах интернета,но Ваш прям уникален.
Спасибо)
i notice again, the points the points that are fixed with cyanoacrylate instant glue adhesives how safe they are in the long run ?
You did it nicely. It is good to use the already existing tools and redo a little. This idea has long been developed with large pneumatic hammers. Steve Lindsay did it perfectly (perfectly). Only his products are terribly expensive. I also did it out of curiosity and this is an excellent method. I used an sds drill to make the piston. I hardened, drilled and hardened.
But now I'm using Sergei Valtman's graver system.
Amigo, saludos desde México, tengo una duda, con el compresor grande si funciona bien el invento que isiste?.
Beautiful! You're a genius man
Thank you for your attention to my work.
1:00 hey master ,may i know the size of it?
somewhat similar to the physics for tattoo machines, instead of electric hidraulic, but the funny thing, the most similar thing in common, is how noisy both methods are hehehe, I wonder how far is it possible, at that scale, just using compressed air, having features that would allow control the strength and depth of the cut - so beautiful stuff there ))) keep it up
precio de tu máquina para Dibujar en acero.?
Loved the video have had the same idea before just didn't know how to make it work .I kind of get it now .
Thank you for your attention to my work.
How does the mechanism work? I don't understand how it reciprocates, unless you put a spring back in. A close-up or assembly video with explanation would be amazing. Thanks!
Thank you for your attention. A spring is not needed in this design. I put it as an addition. The principle itself is that air passes through the holes in the piston, and moves the piston up and down. In one of the following videos, I will probably make a detailed analysis of this mechanism and make a drawing.
@@KirillRunz have you converted the compressor to blow and suck?
@@KirillRunz I am looking forward to more information on how the air makes the piston move up and down. I have looked at the video several times and I can not figure it out.
@@tattoo45uk no he didn't for this specific piece. It's designed for constant air pressure (blow only)
@@BengtRosini13then how can it possibly reciprocate? It seems that only pressure all the time would just push and never retract.
Fantastic. is it possible to see a drawing to understand the method of operation? Thank you
Air pushes into the chamber inside the brass handle, filling that chamber and pushing out the spring-assisted-return internal "pin". The pin moves forward and releases chamber air through it's forward hole, letting it return into the brass chamber, to get pushed forward again and release air.....
Piękna robota. Pozdrawiam 👍 😉
Здравствуйте! А будет такой штихель работать от помпы тонометра?
Esaka name kya he
Золотые руки у тебя.
Спасибо.
God damn how is this channel only at 80k subs? THE WORLD NEEDS TO KNOW! This is fuckin genius!
Is that just a motor with a chuck attached to it? the square horizontal drill with grinding wheel on it?
Muchas gracias por su respuesta tan valiosa, funciona como un martillo neumatico, tengo los planos de un grabador neumatico en AUTOCAD, es cuetion de llevarlos con un tornero, cuendo guste se los comparto, en air graver estan muy pero muy caros, estoy para servirle
Gracias por su atención a mi trabajo. Saludos desde Ucrania. Te deseo éxito.
Me interesan los planos para hacer el proyecto, como te puedo contactar?
Am I able to purchase?
Good job. I have a question, do you connect it directly to the compressor? How does it move back and forth?
Bonjour ! Super vidéo et bonne idée de détourner un le pointeau automatique pour ta réalisation. Elle à l'air de bien fonctionner pourtant tu ne semble pas satisfais. Aurais tu des plans pour cette réalisation j'aimerais tenter cette l'expérience mais je ne comprends pas le cheminement de l'air dans l'outil pour le va et vient avec un flux d'air constant ? Bonne continuation.
how is this better then a normal enraving spade?
I do custom leatherwork would you want to trade for one if you're not allowed to sell them?
Thank you for your attention to my work. It was just an experiment. This tool did not work for long. Thank you for your offer, but I do not make such tools in series.
Excellent job. We shared this video in our homemade tools forum this week :)
Thank you for your attention. I appreciate it.
Ufff, que nivel de trabajo!!
Well done 👍👍👍. Thanks for sharing
Thank you for your attention.
I have watched videos like this trying to discover if the air source is alternating or direct pressure. Many of them are alternating and they show you how to modify a tyre inflator to provide alternating pressure. But it seems hardly anyone comments on the way the engraver works. In this video you make it clear a larger compressor is better but does it provide normal direct air pressure or have you modified it to supply alternating pressure? Is there such a thing as a direct pressure engraver?
Compressor is not modified , direct pressure . Larger is better i think because the details precision not very high , and air can miss in gaps .
do you sell that tool ..sir 🙏🙏
Did you have to modify the bigger Air compressor please????thanks in advance
Thank you for your attention. Not.
Could you be more specific on if you modified the air compressor your statement didn't make any sense thanks
It's not modified, the aircompressor just blows out compressed air. There is no blow and suck action like some designs need.
@@oniemarc_engraving thanks very much
This is cool!! I LIKE TO try new ideas,.....do you give out the dimensions on how to build one?
Подскажите я не понял это прямоточный?
sir
3:28
What is that thing? could I make it?
This is the main fuel jet from a motorcycle carburetor.
@@KirillRunz Is that part different from a normal pipe?
Any other threaded tube can be used. I just had a ported carburetor at hand, and I unscrewed the part I needed from it.
@@KirillRunz Thank you very much.
Hey I want to buy this machine , can you please help me ? How to this buy this?
Thank you. I appreciate your attention. This machine is not for sale. It was just an experiment. I don’t make such items to order.
Респект и уважение мастеру :)
Спасибо за Ваше внимание.
Excelente, se ve bueno. Lo intentaré, creo que intentaré replicarlo. Cuánto PSI usas para su funcionamiento? Haz fabricado algún pedal para accionarlo?
Muchas gracias por compartir tu fabricación.
Nice man.. "Einstein" nivel.. 😂😂💪💪💪
I could figure out most of it. Just that where is the location of the hole in the body for air inlet ? Does the piston cross it? If you could just show a hand drawing of the working mechanism, would be great. Rest of the video is self explanatory. Cheers.
😲 you cool 👏👏👏👏 nice job 💯👍
Have you construktion drawings ?
Nice video
А что за линза у Вас для макро съёмки?
Линза из китайского набора из 3-х линз для смартфона. Одна из линз - макро. Точное название не знаю.
Hello my dear brother, can you make a device for me?
Brilliant design
Здравствуйте.А где купить хлорное железо и быстрое вароненние.
Здравствуйте. Я покупаю в интернете.
Спасибо.
Здравствуйте...
Дайте пожалуйста ссылку , где вы приобрели сам кернер...
Cool gibt es da eine Skizze?
Thank you for your attention. Not yet.
I wish u would narrate the why, do's
& don'ts.
This is genius!
У вас есть такой изделия для продажи
I make like you but always fail, what's the right way mate?
Sensacional !!!! Estou sem palavras.
Sounds like a mini gun or fire storm canon on a battleship
Would like to see a much more detailed video
🫂 чудова робота
А далі, де роботи виконані штихелем?
unbeliviable! Thanks :-)
Can you make me one?...
try using the spinning plynth as an engraving vice
Ждём новых работ!!!
Спокойной ночи друг, подскажите, компрессор ли вы доработали? Или этот оригинал, я уже готовлюсь смотреть ваше видео, привет из Мексики.
Boa ideia e muito bem feito,parabéns.
Super pomysł ✌️🤓
I see the next few etchings will be much enhanced by this tool.
Thank you for your attention. I'm working on it.
Top
Your are the best!!!!
Non ci capisco niente... servirebbe uno schema.
Good job mister
Thank you for your attention.
Бро а чо дремель никотируеться?
а чертежи есть ?
Пока что, нет.
пиши просто пневмоштихель сергея вальтмана он на вакуме работает и лучше
Te falto información del compresor
geniale.....
А может быть, всё таки, добавишь к травлению небольшие штрихи гравировкой? Думаю, будет интересно. Успехов.
Спасибо. Работаю над этим.
можно чертеж с размерами
Это был просто эксперимент. Модель не рабочая.
👍👍👍tnx
nice sharing, thank.
Это же пневмоштихель!
Как по чертежей???
ingenious
Масло на поршень не допустимо я даже руками его не беру ,а через салфетку.
Brilliant
главное всё молча Ништяк
If rather just buy one from you😁
👍🏻 WOW! 😉 👍🏻 👍🏻 👍🏻
Полезно👍
1:55 si no se quemó el vaso dejo de llamarme natal Obama😄😄😆
Thanks for sharing
Thank you for your attention.
круто придумал
Спасибо.
Да красавиц Чего говорить.Да кстати вопрос Кирилл Подскажи как убрать вонь с железа после травли в солёной воде ,ато кухонный топорик испортит всё мясо😁😁
Я много мою металл в содовом растворе, а потом обрабатываю маслом, вонь после травления уходит но запах масла появляется:))) Можно попробовать чем-то пахучим намазать.
@@KirillRunz Привет Я уже ,,намазал,,😁 дремелем с маленьким пальчиковым камнем прийшлося стереть всю черноту заодно лучшие насадилось топопорище😁👍👍
Cool.
Thank you