ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Upgrading my Razor Crazy Kart battery from 2x 12V Lead acid batteries to a single 24V Li-ion power tool battery. Here's other videos to show how I made the battery connectors: • DIY: Hack a Kobalt 24V...
• DIY Ebike S01E05: Home...
Hey that's super cool
For the bigger boys, 3 of those batteries in array would be FAST
These things are dangerous 😜 I bought the shift yesterday and did a 18650 battery upgrade and man that thing is mad
So just swap the battery without the need to do anything? Will the charger still work or must use the drill battery original charge?
Great solution. Can I recharge the 24v kobalco battery with the original crazy cart recharger? Thank you
You can not, because the crazy cart electronics controller (ESC) is not programmed to properly charge litium ion batteries. I watched this video and built my cart based on this videos premise but made the following changes: bought a "Battery Adapter for Kobalt 24v max Lithium-ion Battery 12 Gauge Wire Robotics Dock Power Connector" on amazon ($20) which I attached to the base of the crazy cart (drilled 3 holes through the steel, screwed down the referenced battery clip (ensuring enough space to slide battery on and off) and ran the wires into the cover). This way, when the battery is depleted, I can easily access it from outside of the cart and put it into a Kobalt charger. Hope that helps.
Thank you for the video... how much time works the crazy cart with this new battery?
That depends on how hard you ride it. But I'd say play time is about an hour continuous play.
Thank you man. Smart man. Works gr8t!
Very neat idea and install. A good weight saving as well. Can you tell me - does the cart have the same "punch" with the power tool battery?
Sick stuff, bet you get tons of props for being a cool dad hah. :)
Actually, it's also for me. :) You know people (or should I say women) always say, "men never grow up, they just get old". I'm still a kid with grey hair. :)
vuaeco i think that’s so sweet 🥺
Im trying to put a battery with a xt60 wire on a crazy cart dlx i will need to put on the xt60 connector on the wire right? Or is it different for dlx
Can you wire up two of those batteries in parallel for longer runtime?
Yes, I have a dune buggy with three Kobalts in parallel. Technically it'll run three times as long and the reduced speed of discharge for each battery will help with longevity and potentially heat issues.
@@SilverBackStacker Three is even better.
Oh and what is the top speed with the new battery
Great idea! And huge THANKS for taking the time to make the video and post it!
Wondering...did you make the connector the battery itself locks into or are those available?
Yes, I made a battery connector. I made many versions but here is the latest one: th-cam.com/video/En3AG0fNpjs/w-d-xo.html
Wow! Thanks so much!
That is a great video too. very helpful.
I so appreciate you getting back to me about this.
With your experience with these crazy carts and their battery’s
is there much difference in the original battery configuration and
the switching to the “cordless drill” battery’s’?
Dose the cart run and function basically the same?
What can I except for a change time / run time?
Thanks Again,
Tyler
Can anyone tell me if it can use the charger that came with the cart? Also, does it have the same output and speed as the oem battery?
Vuaco is it faster than original?
How long does it last for
What about low voltage protection for the battery
The battery (kobalt) has the protection built into it's circuitry (think of using a Drill, the drill doesnt have the electronics to sense the battery capacity, that is all managed inside the battery pack - from my understanding of the batteries description)
Can the controller handle 36 volts? I'd like to use my Ryobi drill batteries, 18 volts each since my charger died.
Did you ever try it?
I just hooked up 2 Milwaukee 18V batteries to my sons, been working for over 30 mins now
It will run 36 volts but the 24volt motor will eventually burn out, same with the controller, your gonna wanna buy a new upgraded controller and motor but yes it will run just not for long with the stock stuff..
Whoops my bad I just realized this comment is 2 years old
What gauge of wire did you use?
Awesome job,thanks!
Thanks Ty.
Hey if you can reply back, I have a couple questions about the crazy cart I have, would help if you knew some info.
hey did you create the adaptor on the power tool battery pack? What materials did you use? Can you post video of adaptor creation or detailed instructions?
Yes. Link to video is in the description.
Check the video on my page! Very easy
that,s cool thank,s for sharing
Thanks guys.
This is the original crazy cart..
Isaacs Random Videos what’s your point?
Could you do the same thing with a 48v
Supreme fatty AKA//Your boi Felix :D yeah just gotta double the battery and get a 48v controller
@@Ferotiq shut up you dont have to replace the controller but the motor will not like it
Where did you get that battery adapter?
Home made. Link to video is in the description.
thanks man
Was awesome til the kid driving cuz he has no clue how to drive
try dewalt 20/60v battery
11
You dt