ANOTHER REFURBISHMENT & TACKLING A COUPLE OF SMALL JOBS ON THE 135
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- In today's video I show off my refurbished calf crate for a fraction of the price of a new one. Then I tackled the door handle on the 135 which turned out to be an awful job and took much longer than planned and then I gave the blades of the topper a lick of the grinder and greased it up.
To see more:
Instagram: KarenMoynihanFarm
TikTok: KarenMoynihanFarm
God Bless her, dont you just want to jump in and help her, but then again Karen doesn't need it she's got it all under control
U did a good job on the tractor door
Such a nice farmer! Good for you for giving it a try. You have done well.
Don't Karen trust the lift on the tractor too lift the Topper when you're working underneath. ❤❤❤
Good work Karen. Don't take any chances when you're working with Machinery. Good to see you're Daddy doing well. ❤❤❤
Great that you have conquered the angle grinder very proud , always makes me smile seeing you and your dads hard work pays off love you all❤❤❤❤
Hi Karen, you are a real trooper and no job seems to bother you in the least. And you do all this to help your dad out on the farm, while holding down a full time job. The calf holder is a huge improvement and should help you out immensely. Another interesting video. Chris from Australia 🇦🇺.
Thank you 😊
Don't be too harsh on yourself about time taken. You completed the tasks and gained more knowledge in the process😁
Great job😉
Thank you 😊
Its a learning curve, some blokes i know wouldn't even know how to turn it on.let alone sharpen a blade.well done. Regards James.
Fair play to you for giving it a go. Keep up the great work 👍
A great video again Karen you and your dad working together is so lovely to see, he must be so proud ❤
I could listen to you lovely accent all day and night 😊 x
Hi, just stumbled across your video. Youngsters today seem to be completely inept at what you are doing. Hat off to you for all you have achieved and keep up the great work
Another great vid Karen,every day a new challenge and u smash it every time.
Don't go crawling under the topper. If you need to get under it get some sleepers or blocks to put each side, so it's supported. Don't trust the hydraulics, safety first. 9:37
I had a block under it
Great job Karen we have men here who won’t take a grinder in their hand you’ve shown them up I take my hat off to you 👍
The ole massy getting a make over, fair play to ye Karen
Mighty stuff
Your an inspiration
Hi Karen, love the video. Persistence paid off with that tractor door, it looks great. And to answer your question, yes.❤😊 Take care.
5 🌟 🌟 🌟 🌟 🌟 video calf create looking good can't wait to see 135 up and running again
Karen, that is a great improvement on the calf crate that will make it much safer for you and the calf.Glad your door latch works much better after using the grinder on it. Your topper will operate more efficiently with 'sharp' blades. Blessings to you and your dad.
Nice video karen when sharpening the topper support it on wooden blocks
I had a concrete block under it
@@karenmoynihanfarm They could crumble or have splits in them no give in the wood
That was a great fix on the Crate. Learning to Grind! awesome
Nice job painting and learning how to use the more dangerous tools around the farm. Somebody has to do it 😉. But always be focused in order to keep the ten fingers (and toes). And yes, wear protection.
Pointy pliers😅 thats cute here in north america we call those needle nose pliers. However I'm actually getting used to a bush hog being called a topper Calf crate looks good! Enjoyable vid!!
Great video Karen. Well done on trying the grinder for the first time, not an easy tool especially been in an awkward spot sharpening the blades on the topper. Enjoyed watching 👍🏼
Learning every day. Right on! And the sharpening is a good thing to do. But of course it doesn't require a knife blade edge. Yes, speed of the blade is a key. But I'll bet you notice the difference next time you use it.
Another very interesting video Thank you 😊😊😊
Alexander Duncan from Aberdeen still sold some spare parts for the cabs quite recently.
Good job done one more out of the way
Great job Karen !
IMPORTANT SAFTY TIP : When using an angle grinder always use the correct RPM wheel for the angle grinder. We had a terrible tragedy in our community when a local waterman put a 6000 rpm wheel on a 9000 rpm grinder. The wheel can break apart and seriously injured you.
I’m sure your equipment is in good order but I still pass that important tip along to anyone using an angle grinder.
My Dad was actually telling me about a similar story to that
Hello! Good day 🖐 You are a hardworking girl. You often shoot videos. 💪
Hi Karen another enjoyable vid as always, the new calf crate looks a fine job and at least you had a go with the angle grinder, and as time goes by and you use it more and get more confident with it you will be grinding away like there's no tomorrow.
Well done!! 👍
Excellent you persevered and got the door lock fitted and working, its fiddley work I know but you got it working and thats what matters. Im not bashing you but invest in some axle stands for working under raised implements, six inch concrete block is better than nothing but stay safe and dont take chances. Keep the great videos coming.
Doing all that might have took longer but it's another bit of knowledge for you. You did a fine job.
Hi u stuck with it. And u got r done!!
Good job safety first! Made my Sunday even brighter thank ya hope you had a great weekend?
Thank you so much, I did and hope you did too
Love watching your videos
Great stuff as always , keep up the great work ,
cattle crush looks great and angle grinders are a great tool just keep your fingers out of the way
Brilliant show angle grinders are unforgiving so please be careful ❤
Jerad does some nice work. It good to have someone you trust for getting those jobs done.
Very good vidio you are a pleasure to watch.
Good job karen
Well done. Be bl@@dy careful with the grinder ..theyre lethal
I was scared
Ever day you learn new skills 😀 great video
What baffles me is the amount of people who made a comment about you under the topper without a support , Do people not read the comments and see you had already mentioned you had a block underneath the machine my God really ?
Give your dad a slap on the wrist though for showing you bad habbits using the grinder without eye protection until you advised him😎 well done Karen
As I see your repaired calf holder , or whatever you call it, I do see that the bar that you need to put in place to lock the head of the calf and my advise would be to put on an extension to that iron bar, so that your fingers dont get pinched while securing the bar. This would be an easy fix by a wooden handle attached to the bar. If it saves fingers and hands in genera,l it is a great day.
Not bad when you've finished your first angle grinder job with all your fingers and toes.. 🤪👍Just don't take chances with it, it's not a very forgiving tool..
Good woman Karen well done
At least you are trying to do things. Put something under the topper when you are under it working on it to be safe
I had a block under it, you just couldn't see it in the video. I wouldn't chance it without it
It’s good to see you trying well done
That is incredible job yea are doing
Good video
There is a lot to be said in doing your own repairs, good satisfaction. The lock metal could be maybe more hardened material ??. Can't be too careful with grinders, the battery ones are less cumbersome, even though I only have the corded one too.
You should always prop up anything that's held bey hydraulics . You get no warning when something fails, could cause a serious injury. Even so keep up the good work.
There was a block under it
Expert is it! That Ger sounds a lovely fellow!
Don’t forget to check the topper gear box oil level as it will leak under the topper and you may not notice also you need to protect your hearing when you’re young or you may be like me deaf as a post
Your doing an awesome job on the farm ❤❤
Your Dad is teaching you very well your doing very good 🎉🎉
You are doing great❤
Top woman Karen …. As always
We all Love you
Hi your doing great well done 😊❤️
The only way to learn is to do 👌
Gotta start somewhere!
Your doing awesome. You better watch it though. Your gonna be a full time farmer, if you dont watch it. 😂😂. Just teasing, love your videos, a little tip by you some jack stands for when you have to be under the topper. Dont want anything to happen.
I had a block under it. The poor man's option instead 😂
Proper hands on , can do attitude , but make sure ye safe 😀
Karen, I wouldn't be getting under the topper unpropped too often, I think it's just looking for trouble. Stay safe
It was propped
Hi Karen you always deserve a like. How is the 135 running, did you get my message from your previous video regarding engine need to be bled.
Take care and keep up your amazing hard work
great video great voice you would get job on nation wide or radio sports and great worker loads of welding course Galway on evening time september two nights week mig welding tig welding
Great video as ever. Carefull with the ould grinder though. I had disc disintrigate 20 years ago and the nails on 2 of my fingers have been growing out the side of my fingers ever since 😊
😳😳
Hi Karen great video again thanks, it's great how you have a go at anything. The calf crate looks awesome it will be much easier for you. Didn't know you do fabrication videos 😅. Thanks again take care and stay safe 👍 😊.
😂😂😂
Ya dun well wee lass and da is proud of you I can see it 😊😊
A cutter blade that is sharp does cut better and requires less hp to do same job also a cut blade of grass regrows faster than a tore or mashed blade of grass
A lick of paint and tractor will be like new lol
So much better than that grassmen nonsense . Great stuff
🤣🤣 I don't think many people would agree with you there
Use the proper goggles wen using anglegrinder karen they not to be messed with ,door handles will work better for you now ,i like the way no job too large for you with dads help ,keep up the great work you are doing 👍.
Fair play guy keep her lit
Karen, You make these videos very enjoyable to watch.
I don't expect you to answer so I'm hoping some of the other viewers can answer a few questions? If they are insensitive please just ignore me.
- how was Dad injured or disabled?
-What do you do for a living?
-Do you live with Dad?
Thanks. Oh and I still Adore that accent🥰
He fell through a ceiling when working as a carpenter.
I'm a retail area manager
No I live just up the road from my parents
@@karenmoynihanfarm Thank You Karen
Always vid like always 😊
Great video again, however don't rely on hydraulics to hold up slasher ( topper) .always put props underneath for safety. Sharpened blades definitely cut better, especially on rushes. Keep up the great work. ❤
I had a block underneath it
Function before form ,diy fixes are just adds ¨Character¨ to the machinery
Your looking so good today karen and your keeping your tarter good to karen ❤❤
Wouldn't removing the blades to sharpen them be easier? Just a thought.
Karen you are amazing to try using a grinder for the first time as they can be dangerous if you're not confident, be careful we all love you.
Nice vd..all the beat
the main thing is it now works
How old is that tractor? It looks like you can time travel with it kinda like TARDIS from Doctor Who.
Angle grinders are like everything else... Foreign at first, then a bit odd but practice practice and you will be fine. I've used one every day for last 10 years at work. I was terrified at first now... Eeh...
And you didn't film the stuck door because of the cursing😁
probably 😂😂
Never get under a raised implement like you did to sharpen those blades, always support with something so you don't get crushed ,eg long axle stand's bales of straw but there is a fire risk , been better to take off tractor and secure it in a vertical position, I know it takes longer but life is not a rehearsal .
it was supported
Glad to hear that , just thinking safely first, everyone is racing against time/whether etc ,I have a friend who had a bad accident involving farm machinery .
I wouldn't trust getting under the topper even with the tractor running
I have a block under it so it will stop it coming down. You just can't see it there
Id be worried about the pto having a notion and engaging, would always take shaft off tractor and leave it running while underneath as was done in video
@@PaddyGun The shaft was disconnected. I wouldn't be able to raise it that high if it was still connected to the tractor
There is always someone smart to try and put you down
Why dont you watch the video again and you can see she disconnects the pto and the block.. leave her alone !!
Well
Loving the videos keep up with the good work p.s you need to add buy me a coffee so people can buy you a coffee 😊 or something for the tractor
Ah sure if enough people watch the videos that will sort that out 😂
Be careful with that crate I have seen calves choking in it
We've had that crate for over 20 years and not a choked calf in sight
Top of the morning to you my dear
What about the side windows?
Well Karen, bad raining weather, ground getting wet, were did the front windscreen of ur 135 go, great video, kieran from Laghey donegal town
I actually don't know but hopefully I'll have the new one in soon
Concrete blocks are not good enough to support machinery. They can shatter or break. I would suggest leave angling grinding to someone else as tasks you are doing are difficult and require an experienced operator.
How does one become experienced if they never do it themselves?
Don't go under the apple trees without a hard hat on. Maybe better to weld a pipe on the back of your topper in the centre or one on each side one in the centre would do me around about 70mm long 50mm diameter drilling a hole right through it. Then with hydraulic fully up put another neat fitting pipe inside it can drill a number of holes through it . Next time with hydraulic up drop in the pipe and put in the pin it would be safe to sleep under. Mind on the job at hand work safe don't forget your ppe.
👍👍👍
Did ya get the tank cleaned out yet.
It's with the mechanic now. Hopefully will have it back tomorrow
👍🙂
Never trust hydraulics two axle stands opened up to the full.height and rest your topper on them
I had a block under it
Never go in below a machine with out a prop
It was propped with a block