I purchased this as my first gun too. Shoots like butter! My only gripe about it would be the weight. It does seem to be heavier than the glock but for the money it’s a steal!
I just cleaned my canik according to your video. It was kind of relaxing. I didn’t realize my gun was so nasty. I used those round make-remover pads that lady’s use. I got like 200 at Walmart for like $3. The oil and bore cleaner was cheap too. The gun seems to move better now.
I'm not a commando or a Rambo, but I've had my Canik for a good few years and fired it a fair number of times if not excessively....it is glad to get a decent cleaning, thank you. I swear this gun is the AK47 of pistols! It NEVER fails me. Tremendous value!!! I'm planning to buy another just the same, TP9SF, because it is SO good and because one is none and two is one.
For anyone curious about how much oil to use, if you don't have compressed air, grab yourself a few cans of keyboard cleaner. You don't want an excessive amount of gun oil on everything. for example after lubing the recoil spring, put the spring over a paper towel and spray compressed air over it, then wipe clean, too much oil will attracts dust which will make the lube tacky. Also, If you are getting stovepipes, or extraction failures, you could be just doing a poor job of getting excess oil out.
@@Raven7400 I like clp breakfree,Ballistal,frogoil and beechwood KC products hoppy's number 9 is kind of old school but still works good and has a pleasant smell for general gun oil/cleaners as for the barrel I specifically use bore shine it has a picture of a bear on the front works fabulous But that's just my opinion
Thank you so for helping me disassemble my canik I was so scared because I am a new owner. I was overwhelmed if I would accidentally discharge my firearm.. I had my best friend watch me to make I was safe
This is my refresher vid before every cleaning. Thanks. This model is very easy to maintain and shoot. The trigger is easy to accidently double tap a second shot high when bringing the barrel back down from the first shot, but im working on that...again, thanks for the vid (although i dont use THAT much lube, you are right about every slide piece that touches another deserves its ointment)
First off thank you this video helped a lot cleaning off my new family, but I was wondering should I have done this outside with protective gear on I did this in my room and got a good wife of the bore cleaner
mannnn I appreciate this video. it help me out big time. you did a great job going step by step. definitely saving this video to watch again for when I need to clean it again.
Just got this gun. Haven’t taken it to the range yet (simply no time) and just before I was gonna head out tonight, I wanted to clean the barrel just in case. When I put it back together, with the slide locked back, I notice the barrel rattles around in a way I swear I don’t remember it doing. Is this normal? Did I mess it up somehow?
I’m new to owning a gun and this would be my first time cleaning. I noticed you used Gun bore cleaner on the frame of your gun, it wouldn’t harm it in the long-run would it? I have the same 2 products you have but I’m torn between just ordering a degreaser or breakdown my firearm to clean it since I’ve been using it.
I do landscaping and my tool is really dusty rn this might be a dumb question to some but is it safe to rinse of the gun off with water to get most of the dirt off before cleaning it this way?
A cleaning kit would be more appropriate than the one that comes in the pistol box. A chamber brush will definitely get the residue much better. My two cents. Thanks for posting.
Also recently my first hand gun purchase. Haven’t fired it yet. Thought cleaning and lubricating should be done first. Thank you for sharing. BTW- didn’t find your review in the description box. Interested to see it.
Thanks for your video. I am not new to guns such as rifles and shotguns but today at the close of 2020 I was able to pick up my Canik TP9 SFX as my first handgun and this has helped a great deal. Questions: How long does it take to "break in a gun" such as this Canik? It's definitely stiff. Also, should I oil it down before taking it out to the range? Thanks.
Just one question. When you were cleaning the barrel I noticed you ran the brush at the end through. I’ve heard you shouldn’t because it can damage the crown area? Is it safe to do that? I know everyone has there own way. I’m a new shooter and just got my Canik. Thx for showing the cleaning.
The bore brush witch is the one with the brown looking brisles is made for that. It helps get all the build up out of your barrel I would t put like a tooth brush but that is fine.
It’s because people it back through the barrel chipping the crown instead of pushing all the way through then starting over. Or just be careful. I like to unscrew at exit, pull the rod, start over. It brushes the same pattern and no risk of crown or ramp damage. 👍
Gun too full of oil. Weapon too greasy. The oil traps gunpowder and dirt. Also, never brush the barrel from the tip side. This is absolutely not a good example of gun cleaning.
7:42 The slide only touch those 4 metal pads. Putting oil on the polymer is a waste and makes a mess. If the slide actually touched the polymer, it would shred it in no time.
Just purchased this as my first handgun. Thank you much.
How does it shoot? I'm planning on getting it
@@rogerdavisjr2125 shoots great, was my first handgun too and it looks so much better than a block Glock
I purchased this as my first gun too. Shoots like butter! My only gripe about it would be the weight. It does seem to be heavier than the glock but for the money it’s a steal!
@@rogerdavisjr2125 he never got the gun.
Just bought one and added it to my collection
I just cleaned my canik according to your video. It was kind of relaxing. I didn’t realize my gun was so nasty. I used those round make-remover pads that lady’s use. I got like 200 at Walmart for like $3. The oil and bore cleaner was cheap too.
The gun seems to move better now.
thurman good man I’m glad I could help!
I'm not a commando or a Rambo, but I've had my Canik for a good few years and fired it a fair number of times if not excessively....it is glad to get a decent cleaning, thank you.
I swear this gun is the AK47 of pistols! It NEVER fails me. Tremendous value!!! I'm planning to buy another just the same, TP9SF, because it is SO good and because one is none and two is one.
Gunsession, thank you for posting this video. As a first time gun owner, I really appreciate your help!
Whereto Next of course glad I could help! Welcome to the 2A community.
Thank you I am now a first time gun owner !
For anyone curious about how much oil to use, if you don't have compressed air, grab yourself a few cans of keyboard cleaner. You don't want an excessive amount of gun oil on everything. for example after lubing the recoil spring, put the spring over a paper towel and spray compressed air over it, then wipe clean, too much oil will attracts dust which will make the lube tacky. Also, If you are getting stovepipes, or extraction failures, you could be just doing a poor job of getting excess oil out.
Any brands that you recommend works best?
@@Raven7400 I like clp breakfree,Ballistal,frogoil and beechwood KC products hoppy's number 9 is kind of old school but still works good and has a pleasant smell for general gun oil/cleaners as for the barrel
I specifically use bore shine it has a picture of a bear on the front works fabulous But that's just my opinion
@@familyman1110 Appreciate it, sir.
No need to oil the spring at all most people say not to
Just got one last week, it's my first gun and I love it. Shoots so well
Thank you! Just got my canik and it shoots flawlessly except for 115 grain and 147 grain
Thank you so for helping me disassemble my canik I was so scared because I am a new owner. I was overwhelmed if I would accidentally discharge my firearm.. I had my best friend watch me to make I was safe
I’ve been thinking of buying this gun for a while now and wanted to know all the ins and outs of it before I bought it. This was a video well done.👍
I love mine
@@SB-mg1wy i bought it! And I love it as well
Thanks for us new canik owners 👍
thanks I know how to disassemble my weapon now
This is my refresher vid before every cleaning. Thanks. This model is very easy to maintain and shoot. The trigger is easy to accidently double tap a second shot high when bringing the barrel back down from the first shot, but im working on that...again, thanks for the vid (although i dont use THAT much lube, you are right about every slide piece that touches another deserves its ointment)
Goodnight that’s just too much lube. Yes, you “can’t overly lube” but you can. Each drop extra collects more debris. A couple drops will do you fine.
She never said that
“Good night” lmfao my dad says that
You are extra hurt by that. It’s his gun
@@mackin800good to help a brother out, “it’s my gun” is a close minded things to say, always be willing to learn and listen
First off thank you this video helped a lot cleaning off my new family, but I was wondering should I have done this outside with protective gear on I did this in my room and got a good wife of the bore cleaner
Thanks dude. That's what I needed. Just a basic run thru
Thanks bud. This is my first gun and just got done firing it. Great gun and easy to clean!
mannnn I appreciate this video. it help me out big time. you did a great job going step by step. definitely saving this video to watch again for when I need to clean it again.
Thanks man I appreciate it
I bought mine the other day. It’s an amazing gun.
Just got this gun. Haven’t taken it to the range yet (simply no time) and just before I was gonna head out tonight, I wanted to clean the barrel just in case.
When I put it back together, with the slide locked back, I notice the barrel rattles around in a way I swear I don’t remember it doing. Is this normal? Did I mess it up somehow?
I’m new to owning a gun and this would be my first time cleaning.
I noticed you used Gun bore cleaner on the frame of your gun, it wouldn’t harm it in the long-run would it? I have the same 2 products you have but I’m torn between just ordering a degreaser or breakdown my firearm to clean it since I’ve been using it.
Clean and simple! Thanks bro!
I come back to this video EVERYTIME I clean my gun.
Thanks a lot man this is great
You can use ballistol like Hickok uses. You can practically cook with it
I do landscaping and my tool is really dusty rn this might be a dumb question to some but is it safe to rinse of the gun off with water to get most of the dirt off before cleaning it this way?
Can you please elaborate on correct placement for the spring inside the rail
It needs to be on the first knotch on the barrel and the other piece out the whole of the front of the slide
Amazing 🤩
A cleaning kit would be more appropriate than the one that comes in the pistol box. A chamber brush will definitely get the residue much better. My two cents. Thanks for posting.
Thank you appreciate the video
Also recently my first hand gun purchase. Haven’t fired it yet. Thought cleaning and lubricating should be done first. Thank you for sharing.
BTW- didn’t find your review in the description box. Interested to see it.
Thank you so much
Do you need gun oil, or does machine oil also work?
Damn good cleaning video.
Is there a need for lube the trigger mechanism?
The top part of my gun doesn’t slide back like yours did. By the grip there’s a piece sticking up that stops my gun from sliding back. Any help ?
Great easy video
RUIZJOSE1625 thanks bro appreciate it
thanks for the video!
I need to get some oil and cleaner.
Use some of his there was enough for everyone that commented
Thanks for your video. I am not new to guns such as rifles and shotguns but today at the close of 2020 I was able to pick up my Canik TP9 SFX as my first handgun and this has helped a great deal. Questions: How long does it take to "break in a gun" such as this Canik? It's definitely stiff. Also, should I oil it down before taking it out to the range? Thanks.
I would oil it down and I would say you will break it in around 300 rounds and your gonna love the way it shoots
@@gunsession6831 Thanks!
Just one question. When you were cleaning the barrel I noticed you ran the brush at the end through. I’ve heard you shouldn’t because it can damage the crown area? Is it safe to do that? I know everyone has there own way. I’m a new shooter and just got my Canik. Thx for showing the cleaning.
The bore brush witch is the one with the brown looking brisles is made for that. It helps get all the build up out of your barrel I would t put like a tooth brush but that is fine.
It’s not going to damage anything brother if it’s the right size brush
@@gunsession6831 thank you
It’s because people it back through the barrel chipping the crown instead of pushing all the way through then starting over. Or just be careful. I like to unscrew at exit, pull the rod, start over. It brushes the same pattern and no risk of crown or ramp damage. 👍
Thanks man awesome video, I subbed and liked
Thanks brother I appreciate it!
@@gunsession6831 for sure man I just bought the same gun 2 weeks ago
Project F02 yeah bro it’s a sweet gun.
I honestly just take my Canik apart and throw it in the dishwasher. Does a 10x better job than I could ever do by hand.
Thanks for this video, came in handy today. On the slide where the hole is where the firing pin comes out, does that need lube/oil?
HyperSole no problem, and I wouldn’t there’s not really a need
Good video
Kool thank you!!
Levy Hernandez no problem
Will need jiffy lube oil 🛢 change lol all good, all and all great, helpful video
So... This is a field strip not a disassembly..
after about how many rounds do u like to do this?
Me in between 500-1500 rounds
Gun too full of oil. Weapon too greasy. The oil traps gunpowder and dirt.
Also, never brush the barrel from the tip side.
This is absolutely not a good example of gun cleaning.
I hope nobody use this video for oiling purpose this all wrong way to much oil this man have no clue how to oil a gun
Is strike hold good?
Tim Pierce ???
Never ever use a BORE cleaner on a polymer frame.
What do you recommend you use on the frame then?
@@Slaypalm not a bore brush
7:42 The slide only touch those 4 metal pads. Putting oil on the polymer is a waste and makes a mess. If the slide actually touched the polymer, it would shred it in no time.
Omg way to much lube guy
I like lube
@@gunsession6831 That much lube is appropriate in other places but not on the firearm
@@lastinline000ROFL 😂😂
Way too much oil, this gun requires very little.
Buy a gun cleaning mat and gun cleaning brushes. Also, way to much oil applied. one small drop goes a long way.
Might as well throw it in the dish washer.
I think you use a little bit too much oil. If you're ever in Sandy conditions that gun is going to attract every bit of dirt a little goes a long way
Use a boresnake for God sake
Wipe your hands bro 🤣
that's a lot of oil.
No gloves ?? With all the cleaner, oil, dirt, lead residue you (and everyone else) definitely need to have gloves on..
Bro…that is WAY too much oil..
this is not a "disassembly" video...taking off the slide is just that: taking off the slide.