It worked perfectly. Thank you very much. For those who could have a problem with cutting the convenient tape; the radius of the circle you have to prepare is approximately 56 mm's
@@alexxaander7915 Nah, i tried to resolve it. Checked everything. even tried some other solenoids, but it didnt changed anything. Dunno. Maybe something about the roller or so. I just bought additional used another one working. On some point im gonna compare it one by one. My first model was with firmware version 1.22 or 1.23 as I could be using any toner in it. In the second one firmware version is older 1,19/20 or so so I have to crack it first as it is working only on chipped toner.
Thnx for this video. But I have a question-will this solution be helpfull if my printer after papier stuck-i remove this page-than switch off the printer- then switch on ...and everythimg works well...its printing normalny....Its also fault of this solenoid.?
It is possible to be solenoid's fault. In the beginning the paper jamming is rare but when the jamming count raises it is pretty sure that you have to do this procedure.
It worked perfectly. Thank you very much. For those who could have a problem with cutting the convenient tape; the radius of the circle you have to prepare is approximately 56 mm's
Great job sir! Kudos to you. You saved my old printer too!
Great video! Thank you! You solved my problem! :)
punya saya scx 4824 selalu macet tidak bisa di pakai . apa sama seperti di dalam vidio
As a mechanical structure it is almost the same. Try with the same procedure and I hope you'll get a full working device. Good luck 👍
I have now Paper Jam 0 without any printing and I can hear (solenoid?) clicking just before the diod goes red with error.
I got the same problem, Were you able to solve it?
@@alexxaander7915 Nah, i tried to resolve it. Checked everything. even tried some other solenoids, but it didnt changed anything. Dunno. Maybe something about the roller or so. I just bought additional used another one working. On some point im gonna compare it one by one. My first model was with firmware version 1.22 or 1.23 as I could be using any toner in it. In the second one firmware version is older 1,19/20 or so so I have to crack it first as it is working only on chipped toner.
Thnx for this video. But I have a question-will this solution be helpfull if my printer after papier stuck-i remove this page-than switch off the printer- then switch on ...and everythimg works well...its printing normalny....Its also fault of this solenoid.?
It is possible to be solenoid's fault. In the beginning the paper jamming is rare but when the jamming count raises it is pretty sure that you have to do this procedure.
@@MrPrintGuyDIY will try...👊👍