Nicely done! I went with the PROVENT 200 which captures 98% of particles ( best rated ) also has over pressure and vacuum valve to maintain equal pressure. Thanks for the video.
Sure wish we had more information- is this a gen3?? Best of my knowledge gen 3 has a manifold pressure sensor that when a catch can is installed reads like the Pcv/ccv is open or clogged….. so catch cans work for a couple thousand miles before a CEL/MIL comes on.
8" x 8" corner bracket from Lowe's works well for the bracket and already has a 90 in it. just have to cut down and smooth one end to make it about 5-6" tall or whatever you need for height on the catchcan side.
No but my tuner changed the threshold. I had a stock truck run this setup and he moved the sensor reference point via a T fitting at the union between the can and turbo.
Nicely done! I went with the PROVENT 200 which captures 98% of particles ( best rated ) also has over pressure and vacuum valve to maintain equal pressure. Thanks for the video.
Sure wish we had more information- is this a gen3?? Best of my knowledge gen 3 has a manifold pressure sensor that when a catch can is installed reads like the Pcv/ccv is open or clogged….. so catch cans work for a couple thousand miles before a CEL/MIL comes on.
Do you have codes for PCV ?
8" x 8" corner bracket from Lowe's works well for the bracket and already has a 90 in it. just have to cut down and smooth one end to make it about 5-6" tall or whatever you need for height on the catchcan side.
What did you use to connect the longer hose?
The original barb union. I just removed the old hose and cut a piece of hose to connect to the can.
Where did you get that intake tube? Best I can find is through Banks for 160.
Go to autozone and buy a 3” x 18” exhaust tube. It’s about $7.
two of your links are the same, Might need to change the first catch can link to the correct link. :)
Has yours triggered any codes?
No but my tuner changed the threshold. I had a stock truck run this setup and he moved the sensor reference point via a T fitting at the union between the can and turbo.
He hasn’t had a fault code yet.
Any check engine light?
no but i'm tuned
Links don't exist
The seller might have taken the sell down. You can just search each part to find a new listing.
Clean setup
pretty slick
Any check engine light?
no but i'm tuned.