Hi Jim ... how do I decrease the rate of the tail scroll. I have not located any steps that I can increase and slow the speed at which the tail will spin. Would you help me?
You do realise the pitch links are turnbuckles with left and right handed threads and don't require you to pop the links off to shorten/lengthen them, thus saving wear on them.
Thank you for video series. Have a question. When I adjust blades to 0 degrees (throttle at 50%) and they are aligned with a tail boom, from the front of my heli, I adjust a blade to 0 degrees. But when I turn that blade around in the back, it is off by minus 2 degrees. What is wrong? Considering that the swash plate has been leveled. Same goes for another blade - from the front - set to 0 degrees and after turning it back (to the tail) - it is -2 degrees off. Is it suppose to be like this? I was thinking, that if the swash plate is purfectly leveled, both blades should have 0 degrees from all sides of the heli.
Hello from Spain then you make a mistake in leveling the swashplate mecanical , its the most importend think to level it mecanical to 0 and i make it all from backward and and than you con not hve 2 degrees of diference its your mistake . Than the new Microbeaest X 5.1.4 point G and H changed you have to read the whole manual and than you undersand all , because than you can make all Helicopers working with the same ground setting , its more work but then you understand all for what it is . I have 7 Algin Helis and without wind the go no to nowere because its like a car when you have a alitentation the car goes everytime sraigt ahead . Best regards from a German living 30 years in Spain and 27 years flaying . :-)))))))) The Mircobeast X its maked in Germany from freakware.de
Excellent tutorial! Showing a quick work of Step L. So nice to watch. No irritating "umms" nor "ahhs".- All the best -Hermie, Philippines
Highly appreciated for great video Jim! Thanks a lot. Regards, Umar Indonesia
Very easy to follow .
Hi Jim ... how do I decrease the rate of the tail scroll. I have not located any steps that I can increase and slow the speed at which the tail will spin. Would you help me?
You do realise the pitch links are turnbuckles with left and right handed threads and don't require you to pop the links off to shorten/lengthen them, thus saving wear on them.
YOU CAN GET MY RISE Please how we configure the 3D mode IN THE RADIO AND GYRO
Thank you for video series. Have a question. When I adjust blades to 0 degrees (throttle at 50%) and they are aligned with a tail boom, from the front of my heli, I adjust a blade to 0 degrees. But when I turn that blade around in the back, it is off by minus 2 degrees. What is wrong? Considering that the swash plate has been leveled. Same goes for another blade - from the front - set to 0 degrees and after turning it back (to the tail) - it is -2 degrees off. Is it suppose to be like this? I was thinking, that if the swash plate is purfectly leveled, both blades should have 0 degrees from all sides of the heli.
Hello from Spain then you make a mistake in leveling the swashplate mecanical , its the most importend think to level it mecanical to 0 and i make it all from backward and and than you con not hve 2 degrees of diference its your mistake . Than the new Microbeaest X 5.1.4 point G and H changed you have to read the whole manual and than you undersand all , because than you can make all Helicopers working with the same ground setting , its more work but then you understand all for what it is . I have 7 Algin Helis and without wind the go no to nowere because its like a car when you have a alitentation the car goes everytime sraigt ahead . Best regards from a German living 30 years in Spain and 27 years flaying . :-)))))))) The Mircobeast X its maked in Germany from freakware.de