I'm putting this on my 2008 BMW Z4 Coupe 3.0i. The vertical door kit cost me $1900. The actuators and auto add on kit are roughly $1300. For me to have them do labor and cost of install i was quoted $1600. Already got the door hinge kit. All in all total cost will be $4,800-5k.
I just bought an 02 GT and I'm really digging all the customization and options you've done to ur 02 stang👍🏾 I too would love these doors but only bcuz they actually go vertical and not the awkward almost 90 degree angle most people have yes automatic is practical but I can live without it to save a buck just give me clean functional and sturdy 💯
@@se7encapadon Thank you for your reply. Can you give the link, please? Anyway, I view the video again and saw the wiring & the relay seem to be quite complicated. And it doesn't show the mechanism for opening/closing & lifting/lowering the door. Hopefully they come out with a version2 to simplify it. Thank you & have a nice day
@@putianren you will need professionally installed but it’s not as hard as it seems, it’s just a door lock pop kit, with actuators to lift and pull down like the pop trunks in the south. And the relays work with the remote and if you want to put the push buttons in the inside like he did. Just go to eBay and type in automatic lambo doors and you’ll see the kits👍🏾
Thank you for your comment. If I said a lot went in to this to make everything work together and look factory it would be an understatement but eventually I made it happen just as I had imagined it going into it.
Something to think about. WIND. in strong winds it's hard to hold on to a normal car door. I was wondering how are you going to hold on to these doors. High above the roof so winds can really catch it and damage it. If the wind can rip off a conventional two hinge door with a brace strut what chance do these have. I think it will be impossible to hold on to them and stop the wind from wrecking them.. they look cool but do you need the hassle..
would i have to travel to get this done to my car? i want that automatic setup cause thats my biggest issue with scissor doors on non lambos i dont want to have to get out the car ro lift the doors up please tell me this is doable to other cars as well also thank you for your video
Great video! I am wanting to do this with my 2015 Roush. I have been searching videos for installation but havent found any. What did you use to pull the doors in? I have the linear actuators, brackets, control modules, remotes, etc. I still need to purchase the door poppers, relay, and a couple other things. Any tips or advice would be greatly appreciated!
Bro by far I tip my hat off to you cause not only do you have the soft touch close doors but you got the option of having automatic lambo doors with a very clean finish and I would Love to see if you and I can do business with one another... Please call me when you can Jeremy Hogue I need your help that I can hire you on if you do call me soon thanks... big ups to you though
Thank you for your comment. If I said a lot went in to this to make everything work together and look factory it would be an understatement but eventually I made it happen just as I had imagined it going into it. You won’t believe how many people don’t realize the soft close part it I actually pulled those of a Bmw and modified theme to work heck along with almost every part/product on this car had to be modified to make it do what it does lol. Yep buy brand new parts and tear them apart. !What warranty! lol. But man I own my own shop in LittleRock Ar. Here are some links we could be in contact. AutoAudioXtreme.com facebook.com/AutoAudioXtreme/ JeremyHogue.com facebook.com/jeremy.hogue.357
It’s not a kit it’s all custom made and almost every product that was used had to be modified to make it work as you see. AutoAudioXtreme.com JeremyHogue.com facebook.com/AutoAudioXtreme/
It depends on your knowledge of electronics and 12 volt wiring ,welding, and being able to modify things to work in a different way then how they were intended I have been in my industry for 22 plus years and it took everything I’ve learned along the way to make it work how it does and still look factory My shop is AutoAudio in LittleRock Ar. AutoAudioXtreme.com JeremyHogue.com facebook.com/AutoAudioXtreme/
EcoRoush1 Thank you for the comment I got your contact info I’m going to try and call you next week I’ve been supper busy with the launch of the home video side of my business AutoAudio & HomeVideo. I do have to say. For me to say that I have Hours,Days,Months in getting those doors to work like they do and still look factory is an understatement. but I will try and help in any way I can to steer you in the right direction.
The interior door handle and pull on the new edge mustang is perfect for these doors
I'm putting this on my 2008 BMW Z4 Coupe 3.0i. The vertical door kit cost me $1900. The actuators and auto add on kit are roughly $1300. For me to have them do labor and cost of install i was quoted $1600. Already got the door hinge kit. All in all total cost will be $4,800-5k.
I want my car exactly like this
I just bought an 02 GT and I'm really digging all the customization and options you've done to ur 02 stang👍🏾 I too would love these doors but only bcuz they actually go vertical and not the awkward almost 90 degree angle most people have yes automatic is practical but I can live without it to save a buck just give me clean functional and sturdy 💯
There is a website u can get what u need for the doors and they have parts for all makes and models of vehicles
Nice, dude.
I really wish I can do this for my Vertical door on my Merc SLK R171.
Thank you.
You can, the kit is on eBay
@@se7encapadon
Thank you for your reply.
Can you give the link, please?
Anyway, I view the video again
and saw the wiring & the relay
seem to be quite complicated.
And it doesn't show the mechanism for opening/closing & lifting/lowering the door.
Hopefully they come out with a version2 to simplify it.
Thank you & have a nice day
@@putianren you will need professionally installed but it’s not as hard as it seems, it’s just a door lock pop kit, with actuators to lift and pull down like the pop trunks in the south. And the relays work with the remote and if you want to put the push buttons in the inside like he did. Just go to eBay and type in automatic lambo doors and you’ll see the kits👍🏾
Great vídeo. Congratulion guy. You are smart.
Thank you for your comment. If I said a lot went in to this to make everything work together and look factory it would be an understatement but eventually I made it happen just as I had imagined it going into it.
Something to think about. WIND. in strong winds it's hard to hold on to a normal car door. I was wondering how are you going to hold on to these doors. High above the roof so winds can really catch it and damage it. If the wind can rip off a conventional two hinge door with a brace strut what chance do these have. I think it will be impossible to hold on to them and stop the wind from wrecking them.. they look cool but do you need the hassle..
Where is your shop. Can you install electric system on my 2001 ZO6 Corvette? I’ll road trip to you in a heartbeat for that perfect system.
Where you guys at can you do mines
can you help me find the website where you find your automatic power
vertical lambo doors
would i have to travel to get this done to my car? i want that automatic setup cause thats my biggest issue with scissor doors on non lambos
i dont want to have to get out the car ro lift the doors up
please tell me this is doable to other cars as well
also thank you for your video
Great video! I am wanting to do this with my 2015 Roush. I have been searching videos for installation but havent found any. What did you use to pull the doors in? I have the linear actuators, brackets, control modules, remotes, etc. I still need to purchase the door poppers, relay, and a couple other things. Any tips or advice would be greatly appreciated!
How much cost?
Bro how much to do my 65 mustang like that
Where’d u get those
That's sick
Thank you
Awesome but where do you get all the installation kits and will it work on a 04 mustang converterble?or how much will you charge to do my car?
Wow that’s sick, how did you get the door to shut by itself ????
How can I get it done
Bro by far I tip my hat off to you cause not only do you have the soft touch close doors but you got the option of having automatic lambo doors with a very clean finish and I would Love to see if you and I can do business with one another... Please call me when you can Jeremy Hogue I need your help that I can hire you on if you do call me soon thanks... big ups to you though
Thank you for your comment. If I said a lot went in to this to make everything work together and look factory it would be an understatement but eventually I made it happen just as I had imagined it going into it. You won’t believe how many people don’t realize the soft close part it I actually pulled those of a Bmw and modified theme to work heck along with almost every part/product on this car had to be modified to make it do what it does lol. Yep buy brand new parts and tear them apart. !What warranty! lol. But man I own my own shop in LittleRock Ar. Here are some links we could be in contact.
AutoAudioXtreme.com
facebook.com/AutoAudioXtreme/
JeremyHogue.com
facebook.com/jeremy.hogue.357
How much will you charge me to do this or where can I get it done
What kit is that?
Were did you buy this set up
Awesome, I would like to contact your installer to do my Lamborghini replica. I'm in south GA.
AutoAudioXtreme.com
facebook.com/AutoAudioXtreme/
JeremyHogue.com
facebook.com/jeremy.hogue.357
Where did you get your kit from? I want one for a dodge challenger 2014, can you point me in the direction?
Cheers.
How
Sup bro hey where did u buy ur kit ??? I have 2k16 wt lambo door too but is not automatic I want automatic ones
It’s not a kit it’s all custom made and almost every product that was used had to be modified to make it work as you see.
AutoAudioXtreme.com
JeremyHogue.com
facebook.com/AutoAudioXtreme/
Hi Jereamy! Is there a way I could learn on how you did it!
It depends on your knowledge of electronics and 12 volt wiring ,welding, and being able to modify things to work in a different way then how they were intended I have been in my industry for 22 plus years and it took everything I’ve learned along the way to make it work how it does and still look factory My shop is AutoAudio in LittleRock Ar.
AutoAudioXtreme.com
JeremyHogue.com
facebook.com/AutoAudioXtreme/
@@jeremyhogue4295 I have a 98es300 lexus how much would that be and how long would that take to complete I live in chicago I would come there for that
What actuators did you use to get them to operate so quickly? T.i.a
I understand it’s custom but please could you give me a rough estimate on the price? With and without the soft close, great job man really impressive
Dude never responded back to you??
@@famousfrost13 nah
bruhhhhh this thing fucks
I left my number for you to contact me. I really would like to discuss some details with you, especially with how to make them close.
EcoRoush1 Thank you for the comment I got your contact info I’m going to try and call you next week I’ve been supper busy with the launch of the home video side of my business AutoAudio & HomeVideo. I do have to say. For me to say that I have Hours,Days,Months in getting those doors to work like they do and still look factory is an understatement. but I will try and help in any way I can to steer you in the right direction.
@@jeremyhogue4295 thanks Jeremy! I have a guy local that I'm going to pick his brain also.
How much did this cost?
Can you do that with 90 degree doors?