Been watching you for awhile I'm here in Trinidad and I'll be honest I've learned so much from your videos and I must say I'm a better tig welder stainless & aluminum.... Not much opportunities here but the ones I do get yeah!!! customers don't complain...... Thanks 100% for your informative information 😊😊😊
No wayyy! I happened to been studying your Stick welding video and realized its from 9 years ago!! I decided to check your channel out and you're still posting, I love it! Subbed and I'll be studying more! (P.S. I have an instructor, but you've shown me more in a shorter amount of time)
For a home shop welder primeweld makes a great welder. I have this specific welder. It’s been buried behind a bunch of stuff in my garage and although I wish it wasn’t, at least I didn’t spend thousands on a bigger name brand welder that would’ve been a bigger waste because I had to have a “big name” brand. This welder came with literally everything needed right out of the box and mine was $750 new at the time. The big name ones usually don’t cone with the extra stuff or are still too expensive when you add the rest. I’ll get back to welding soon, (I usually use a mig welder but bought the primeweld jic) Thanks for sharing!
I got my 225 tig stock I love that machine after not doing any tig for quite a while fired it up made all my settings and made my welds with a little bit of fineness stop and adjust down a little bit. Yah know I have a buddy the is miller only and make all kind of comments about my welder. But I just keep doing my thing. I do t care what he says. Welding 11 gauge steel tubbing.
Every person is going to hate this comment your video start out great for the DC set up , then you started on AC set up I was hoping that you would show what the other knobs all so would be set to as just brought a Boswell TigForce 200pac/dc unit here in Australia that had very little information on how to set up on AC. So far the video's that I have watched on your channel has given great information as how to lay down a stack of dimes thank you for putting your information video's on the net.
Great videos Jody, awesome presentation. Didn't notice any commercials but sure seen a lot of great tools for the trade for folks wanting to learn more and those who are wanting to be better welders. Stay safe and keep up the good videos. Fred.
Thank you Sir. I love this machine. What a great explanation. Can't be mentioned enough. Merci again and greetz from Holland. Ps shall have a look if it's available in Holland. Marcel Knippers.😀💯
Love all the videos you do Jody! Was wondering if you could do a video showing the weld quality difference between older transformer MiG machines having only two settings to change and newer inverter MiG machines that have more adjustments.
Hi Jody, Thanks for the videos, I have learned a ton of useful tips. Here is a basic request, can you make a video on how to change a gas lens screen? I could not find any on TH-cam.
Awesome video as always Jody you the man 👊🏻. I say this I wouldn’t be where I am today if it wasn’t from you and your videos and podcasts wish they were still going. But this channel is probably one of very few that I learned tons and tons and tons of knowledge from and a channel I don’t get burned out on watching and always enjoy. Also with knowledge I learned and passed it on and knowledge that people I work with have no clue about that have double or triple the experience than I have not saying I’m good or anything just I learned tons of knowledge and am probably more interested in welding than others. It inspired me to try to start my own channel. Thanks for everything you do Jody if you ever need a hand making videos with I’m you man lol actually probably I’m not the best but who knows. 👍
Great video as usual. Looks like a great machine if that's what you need for very technical work. You know we did x-ray work at Bowen, Jack Mack, Widows creek without all them knobs lol. That thing would've been nice at Sequoya, and Watts Bar. Garuntee we've🎉 worked together at a few times. We're you at Hammond when they about a 1/3 section of the downcomer? That made some noise Lol Wish I had an e-mail for you. I grew up in Rome, messed up in a car wreck afew years back. Would love to get in touch through e-mail. I watch almost all your videos. I've even learned some things from you Hugh Green didn't show me way back in the day. God bless, work safe brother.
Love the videos. I screen shoot the graphics settings and save them. Sadly I'm just an occasional tig / mig welder ( I like Oxy/Acet for auto body work) My unit is a Lincoln 175 running on 415V and 50Hz. I can't afford your "kits" as our dollar is 66c to yours.
Jody - Can you do a video on welding gas prices sometime? I own my own bottle and yesterday I go to pick it up from Airgas after waiting 3-weeks for it to be filled. They charged me $116 to fill up my 125CF bottle of 75/25 mix for MIG welding. I'm hearing from other guys on social media that I got royally ripped off. I bought the bottle brand new from Amazon for $395 shipped to my door. I didn't want to lease a bottle because my welding machine is brand new and I didn't want an ugly bottle sitting on the back of my welding cart next to my beautiful new machine. Yes, I'm one of those guys. Can you tell us what to expect as far as shielding gas prices go?
Great video as all of your videos,,, thank you for the time you take,, are these welds you're doing with Argon gas or a mixed gas for the steel welding...
💯 I remember a stainless job about 6ft long that warped like a banana. I spent several hours straightening it on a press and maybe made minimum wage. But I learned a lot so was worth it
What foot pedal is that. I have the old style one. I want that style there. Also, do you have a video on the correct way to set up for aluminum. Little more deal on the setting should I say. Thanks
I'm not a foot pedal person. Most places I've worked over the years I've used thumb control. Do you know at Harley-Davidson York, PA they make those poor guys use a foot pedal and stand all day. I can't imagine how that would effect your back and leg joints over time standing cock-eyed all day. I was a weld inspector there before the pandemic shutdown. I had mentioned that I like to use the thumb control when the weld engineer and a few others were there. The weld engineer Matt Dupre got very angry saying I hate thumb control. Very unstable person. He mistreated me a few times while I was there. He had left before the shutdown. Alot of bullying in that place. I loved the job and money but I'd never want to work there again because of alot of the people. Because they have their heads in the sand the tig welders have to use inappropriate welding methods. As for the welds they only want the barely acceptable not top quality. I had to reverse my welding logic. I saw frames with holes or partially missed welds. I had what I saw fixed but I only saw 1 frame per weld cell per day. What went out before and after I looked who knows. Scary thought being those bikes vibrate more than any other on the road. You do very good welding. You are very good at talking to people in these videos. I see no 'better than thou' in you and personality making it a joy to watch your videos. Very helpful! #1 weld account on TH-cam! Thank you!
I think i speak for everyone of us welders "pups and old dogs" when i say that we all love you and your videos, thanks
New to welding learning my way thanks so much! Great video
Thanks for another great video. If all infomercials were as helpful and honest as your "commercial" the world would be a much better place.
Been watching you for awhile I'm here in Trinidad and I'll be honest I've learned so much from your videos and I must say I'm a better tig welder stainless & aluminum.... Not much opportunities here but the ones I do get yeah!!! customers don't complain...... Thanks 100% for your informative information 😊😊😊
I know it was mostly a ad but I gotta say i personally love these longer format videos Jody. I’d love more of em.
Thank you for all the work putting this together. I appreciate what you do.
I’m learning a lot from you Jody, many thanks for all your hard work putting the videos together, all the best from 🇬🇧😉👍👌
No wayyy! I happened to been studying your Stick welding video and realized its from 9 years ago!! I decided to check your channel out and you're still posting, I love it! Subbed and I'll be studying more! (P.S. I have an instructor, but you've shown me more in a shorter amount of time)
For a home shop welder primeweld makes a great welder. I have this specific welder. It’s been buried behind a bunch of stuff in my garage and although I wish it wasn’t, at least I didn’t spend thousands on a bigger name brand welder that would’ve been a bigger waste because I had to have a “big name” brand. This welder came with literally everything needed right out of the box and mine was $750 new at the time. The big name ones usually don’t cone with the extra stuff or are still too expensive when you add the rest. I’ll get back to welding soon, (I usually use a mig welder but bought the primeweld jic) Thanks for sharing!
Jodi has save me more times than many..❤
I got my 225 tig stock I love that machine after not doing any tig for quite a while fired it up made all my settings and made my welds with a little bit of fineness stop and adjust down a little bit. Yah know I have a buddy the is miller only and make all kind of comments about my welder. But I just keep doing my thing. I do t care what he says. Welding 11 gauge steel tubbing.
Trouble-free download of the WorkBook! Awesome work, and a very generous offer from You! I'm going to have this at hand in my workshop from now on! 😎👍
Every person is going to hate this comment your video start out great for the DC set up , then you started on AC set up I was hoping that you would show what the other knobs all so would be set to as just brought a Boswell TigForce 200pac/dc unit here in Australia that had very little information on how to set up on AC. So far the video's that I have watched on your channel has given great information as how to lay down a stack of dimes thank you for putting your information video's on the net.
Thank you for what you do, this it the best commercial ever
Fido's butt was not harmed during the production of this video. FJB
07:50
big bbw cup 😳
love the videos boss !
Wow that's experience talking. Many thanks Jodie
Toujours avec des réglages parfait et très intuitifs .
Merci
Great videos Jody, awesome presentation. Didn't notice any commercials but sure seen a lot of great tools for the trade for folks wanting to learn more and those who are wanting to be better welders. Stay safe and keep up the good videos. Fred.
A very clear and informative video, many thanks.
excellent video thanks Jody
Thank you Sir. I love this machine. What a great explanation. Can't be mentioned enough. Merci again and greetz from Holland. Ps shall have a look if it's available in Holland. Marcel Knippers.😀💯
Thank you, Jodi.
Thanks for what you do, super helpful.
The amount of info. is unreal.
always Outstanding information Jody.....thank you so much, Paul in Orlando
Love all the videos you do Jody! Was wondering if you could do a video showing the weld quality difference between older transformer MiG machines having only two settings to change and newer inverter MiG machines that have more adjustments.
Very interesting and informative video, thank you.
I was using a WM #4 std cup yesterday doing some, isolated, porosity repair on sanded aluminum groove welds.
Hi Jody, Thanks for the videos, I have learned a ton of useful tips. Here is a basic request, can you make a video on how to change a gas lens screen? I could not find any on TH-cam.
Awesome video as always Jody you the man 👊🏻. I say this I wouldn’t be where I am today if it wasn’t from you and your videos and podcasts wish they were still going. But this channel is probably one of very few that I learned tons and tons and tons of knowledge from and a channel I don’t get burned out on watching and always enjoy. Also with knowledge I learned and passed it on and knowledge that people I work with have no clue about that have double or triple the experience than I have not saying I’m good or anything just I learned tons of knowledge and am probably more interested in welding than others. It inspired me to try to start my own channel. Thanks for everything you do Jody if you ever need a hand making videos with I’m you man lol actually probably I’m not the best but who knows. 👍
Thanks Chris. You have some great content
@@weldingtipsandtricks i disagree but try to make it better that in time it will be half decent. Practice makes perfect thanks Jody
Thanks Jody.
Thanks again mate👍👌🇦🇺
Great video as usual. Looks like a great machine if that's what you need for very technical work. You know we did x-ray work at Bowen, Jack Mack, Widows creek without all them knobs lol. That thing would've been nice at Sequoya, and Watts Bar. Garuntee we've🎉 worked together at a few times. We're you at Hammond when they about a 1/3 section of the downcomer? That made some noise Lol Wish I had an e-mail for you. I grew up in Rome, messed up in a car wreck afew years back. Would love to get in touch through e-mail. I watch almost all your videos. I've even learned some things from you Hugh Green didn't show me way back in the day. God bless, work safe brother.
Thanks a lot!!
Thank you Jody! Could you make a video about millscale? When and with what process is it acceptable to be left on to speed up work?
That's impressive 7:58
Love the videos. I screen shoot the graphics settings and save them. Sadly I'm just an occasional tig / mig welder ( I like Oxy/Acet for auto body work) My unit is a Lincoln 175 running on 415V and 50Hz. I can't afford your "kits" as our dollar is 66c to yours.
Jody - Can you do a video on welding gas prices sometime? I own my own bottle and yesterday I go to pick it up from Airgas after waiting 3-weeks for it to be filled. They charged me $116 to fill up my 125CF bottle of 75/25 mix for MIG welding. I'm hearing from other guys on social media that I got royally ripped off. I bought the bottle brand new from Amazon for $395 shipped to my door. I didn't want to lease a bottle because my welding machine is brand new and I didn't want an ugly bottle sitting on the back of my welding cart next to my beautiful new machine. Yes, I'm one of those guys. Can you tell us what to expect as far as shielding gas prices go?
I just paid 86$ today in PA for 100 argon
Great video as all of your videos,,, thank you for the time you take,, are these welds you're doing with Argon gas or a mixed gas for the steel welding...
ฝีมือดีมาก
Jody, has there ever been a job or customers that you wished you never accepted?
Ty, big fan
💯 I remember a stainless job about 6ft long that warped like a banana. I spent several hours straightening it on a press and maybe made minimum wage. But I learned a lot so was worth it
What foot pedal is that. I have the old style one. I want that style there. Also, do you have a video on the correct way to set up for aluminum. Little more deal on the setting should I say. Thanks
You can order it directly from PrimeWeld.
I'm not a foot pedal person. Most places I've worked over the years I've used thumb control. Do you know at Harley-Davidson York, PA they make those poor guys use a foot pedal and stand all day. I can't imagine how that would effect your back and leg joints over time standing cock-eyed all day. I was a weld inspector there before the pandemic shutdown. I had mentioned that I like to use the thumb control when the weld engineer and a few others were there. The weld engineer Matt Dupre got very angry saying I hate thumb control. Very unstable person. He mistreated me a few times while I was there. He had left before the shutdown. Alot of bullying in that place. I loved the job and money but I'd never want to work there again because of alot of the people. Because they have their heads in the sand the tig welders have to use inappropriate welding methods.
As for the welds they only want the barely acceptable not top quality. I had to reverse my welding logic. I saw frames with holes or partially missed welds. I had what I saw fixed but I only saw 1 frame per weld cell per day. What went out before and after I looked who knows. Scary thought being those bikes vibrate more than any other on the road.
You do very good welding. You are very good at talking to people in these videos. I see no 'better than thou' in you and personality making it a joy to watch your videos. Very helpful!
#1 weld account on TH-cam!
Thank you!
Fantastic as allways
🎉🎉🎉🎉🎉
Toujours avec les réglages précis 0
Merci
LeaveAnyComment &ThumbUp 4AIgos