Thank you so much for taking the time to make such a well done and useful video, I would like to button up my 520 and you have shown me how. Thanks again.
This gives me so many ideas for my 1000-3. Thanks for sparking some ideas. This is a terrific build and what's better is you have so few dollars in it. Well done!👋
Cool..very cool. I have a 2018 P-500 never had any problems with it. ‘’I do run straight gas in mine and is garage keep …runs very good. Thanks stay safe everyone.
I made a roof on my 520 from my traction boards, used U clamps onto the roll bars and then heavy zip ties between the two boards. Works great and saves room in the box.
Very nice. I’m building doors for a couple of side by sides now and will probably incorporate a few of your ideas. I see how you latch them from outside with the cooler straps but how is it latched from the inside when you are riding
Very nice design and great narration of your project! I plan to replicate this on my Polaris before next winter. Do you remove your doors for summer use? How hard would it be to remove them temporarily?
@@JoeFleurent thanks, 2” poly hinge from us plastic. Cost was $18 plus shipping. 2 years later and hinge works excellent and performs just like when I bought it www.usplastic.com/
Looks great, I am planning to copy it. What hardware did you use? I had considered using #12 stainless steel nuts and bolts. I am also trying to engineer sliding windows, my wife who is paraplegic uses ours as her deer "blind". Our windshield tips out but it would be good to be able to slide the windows back. Thank you in advance, this one looks better than some of the aftermarket offerings.
Soo doing this.. specially that heater but if u ever been in a casino during covid some of them put these plexi dividers in between machines..well where I work I was able to get some for free.. cut those into shape and good to go
I was wondering about the seat covers. I looked for them on Amazon for a Honda pioneer 500 and 520 but didn’t find anything, would you be able to provide a link? BTW the warn winch looks very useful, I found it and am now interested in one. Great job with your machine, awesome build, the best Ive seen on TH-cam. I was contemplating 100 watt solar panel on the roof powering up a separate battery pack running a cb radio or led light bar, completely separate from the machines electrical.
United States Plastic Corporation out of Ohio and product is called 2” poly hinge and I bought 10’ and it was perfect length with a few inches left over to do two doors
Great job! I'm ordering the heater today, Nice job on the doors................
Thanks for sharing this awesome hard door and heat solutions!
Thank you so much for taking the time to make such a well done and useful video, I would like to button up my 520 and you have shown me how. Thanks again.
Glad it was helpful!
This gives me so many ideas for my 1000-3. Thanks for sparking some ideas. This is a terrific build and what's better is you have so few dollars in it. Well done!👋
Thanks!
Great job 👍 and your dog looks very happy
Greetings from Arkansas. Loved the video. Lots of great ideas you had.
Thanks so much! 😊
Nice set up you guys
Thanks Jeff!
Awesome build!
Thanks!
Cool..very cool. I have a 2018 P-500 never had any problems with it. ‘’I do run straight gas in mine and is garage keep …runs very good. Thanks stay safe everyone.
Very nice work.
Neat job. Looks great. Thinking about getting this utv in the near future and I think I’ll try making those doors👍
Thanks!
Get it. I love mine.
great job! So many ideas you have given me
I made a roof on my 520 from my traction boards, used U clamps onto the roll bars and then heavy zip ties between the two boards. Works great and saves room in the box.
Awesome work thanks for sharing!
Very nice. I’m building doors for a couple of side by sides now and will probably incorporate a few of your ideas. I see how you latch them from outside with the cooler straps but how is it latched from the inside when you are riding
Thanks! There’s two cooler yeti style latches inside on each door. Video shows them.
Very nice design and great narration of your project! I plan to replicate this on my Polaris before next winter. Do you remove your doors for summer use? How hard would it be to remove them temporarily?
@@joelpenticoff1951 thanks:) I run a long bungie behind my cab window and hook a yeti style latch from each door into the bungie in warm months
nice job. what did you use for hinges
@@JoeFleurent thanks, 2” poly hinge from us plastic. Cost was $18 plus shipping. 2 years later and hinge works excellent and performs just like when I bought it
www.usplastic.com/
@@JoeFleurent here it is
www.usplastic.com/catalog/item.aspx?itemid=124629
Trying to copy same set up. Good design. What size nuts and bolts did you use? 😊
Can you remove the Mr Heater and show us how you attached the fire extinguisher bracket to the aluminum strapping. Thank you
The fire extinguisher bracket is simply mounted with two bolts and nuts
Looks great, I am planning to copy it. What hardware did you use? I had considered using #12 stainless steel nuts and bolts.
I am also trying to engineer sliding windows, my wife who is paraplegic uses ours as her deer "blind". Our windshield tips out but it would be good to be able to slide the windows back.
Thank you in advance, this one looks better than some of the aftermarket offerings.
I did not use stainless, just regular bolts and nuts
Soo doing this.. specially that heater but if u ever been in a casino during covid some of them put these plexi dividers in between machines..well where I work I was able to get some for free.. cut those into shape and good to go
I was wondering about the seat covers. I looked for them on Amazon for a Honda pioneer 500 and 520 but didn’t find anything, would you be able to provide a link? BTW the warn winch looks very useful, I found it and am now interested in one. Great job with your machine, awesome build, the best Ive seen on TH-cam. I was contemplating 100 watt solar panel on the roof powering up a separate battery pack running a cb radio or led light bar, completely separate from the machines electrical.
Thanks!
www.amazon.com/gp/aw/d/B07QYDBS7P/ref=ya_aw_od_pi?ie=UTF8&psc=1
@@maggieandthemillers934 thank you very much
@@maggieandthemillers934 THAT LINK TOOK ME TO A GOLF CART SEAT COVER, IS THAT THE ONE YOU HAVE? THANK YOU
@@scottreed9256 yes
Trying to use Yeti Cooler fasteners. I found the fasteners but what do they fasten onto?
@@muddjammer I bought them on Amazon and they gave the rubber latch and the part it latches to
Another annoying question. What size piece of acrylic did you buy for windows?
@@muddjammer 1/4” thick
how have the hinges held up?
They still look and perform like new.
Nice
Backrest sits is 38x19 and st caver is 36x11 did you order different size?
This is a stock seat
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Our pleasure!
looks like a swat UTV
Type of door hinges?
United States Plastic Corporation out of Ohio and product is called 2” poly hinge and I bought 10’ and it was perfect length with a few inches left over to do two doors
Is it loud?
Not obnoxious nor do I feel we need ear plugs.
Use a router to cut the lex an.
👌👌
Looks ggod
Good
What a way to ugly up your rig!
Nothing more beautiful to us people that drive these on frozen lakes to ice fish!
the ol' 11% off. manards. drives me crazy. nice job tho, for sure. looks nice.
now ace, ace is the place. great dog btw.
Thanks!!