For fixing one farma(mould), we have used 2 rods and 2 flats(Patti), both the flats have rod diameter holes at both the ends and one end of the rod is welded with washer and other end is free to insert inside the flat(patti) holes. We can use different methods like big nut bolt system etc to make the farma(mould) hold together so that when soil is compacted it manually it will not expand.
Please possible to put all the descriptions: size of the wood like length., width and height. Possible to focus the screws and the locks you made. Thank you in advance 🙏
Cement is the common stabilizer while planning stabilized mud blocks (SMB), Cement and lime are stabilizers in our construction. For your reference Book Name: Building with stabilized mud Author Name: K.S. Jagadish refer page-6 and page-64.
No, it's a new experience for us in the field of rammed earth construction. You can refer to the below mentioned book for more information Book Name: Building with stabilized mud Author Name: K.S. Jagadish Thank you...
thanks for the video . I really liked the technique. Does the wall resist humidity? If it hardens with the cement they put on it? how long to dry?, What is the measurement in inches of the mold?, thank you.
Hi, Yes it resists humidity, using cement will harden it and we have tried it for the 1st time, complete one night we have left it to get dried, 60 inches long, 16 inches thick and 24 inches height
Sir please guide me..... 1.Which material is used to plaster in outer wall side ( to protect rain ) Give me composition of material. 2.can we used clay roof tiles with Earth Rammed house? 3. Rate of construction Rammed earth wall?
1) We are not using any external coating for now(we are planning for that) but we have elevated the roof 3 feet outside the building and 3' feet towards the courtyard in our Building-1 so that direct rain water falling on the walls is avoided. For making sample we have used different proportion of cement, lime powder and soil. 1) Soil 93% and 7% cement 2) Soil 93% and 7% lime powder 3) Soil 93%, 3.5% cement and 3.5% lime powder For making Building-1 we have used 91% soil and 9% cement and little lime powder we mixed in water to make the perfect mixture. 2) You can try because even we are doing this work based on trial error method for the 1st time. You can refer Book: "Building with stabilized mud" author name: K.S Jagadish etc 3) Still our work is under process, we have not yet calculated the cost, we assume 70% labour cost and 30% materials cost.
Use petrol, kerosene or diesel on the board so that soil won't get stuck on the board, don't use oil because it will get stuck to the wall and will effect the wall treatment with water and it will also block air flow.
Great work!
Thank you ☺
Very nice all the best work hard
Thank you 😊
All the best 😊
Thank you🌹
Oil the board for a smoother finish. You can cooking oil.
Thanks for the tip!
Very nice brother😊
Thanks! Glad you liked it!
Good work 👍
Thank you🌹
Good work 👍👍👍👍
Thank you😊
best video I've seen yet1
Thank you 💐
😊
Thank you🌹
Once you setup the form work… how much time does it take to complete the 5ft section
Around 30 to 40mins
Vary 👍 nice
@@chinnapraveenkumar2100 thank you🙏
How are the clamps fixed and removed from the bottom. Do the rods get screwd in to the bottom clamps ? Not clear in the video
For fixing one farma(mould), we have used 2 rods and 2 flats(Patti), both the flats have rod diameter holes at both the ends and one end of the rod is welded with washer and other end is free to insert inside the flat(patti) holes.
We can use different methods like big nut bolt system etc to make the farma(mould) hold together so that when soil is compacted it manually it will not expand.
Brother how cast rammed earth wall in L-shape and T-shape ?
Hi, please see our other videos in which I hope you can find an idea.
So, how did the walls turn out? Good?
th-cam.com/video/bmEXp9JPsGI/w-d-xo.html
Using 9% cement and 91% soil we got quite good walls with good strength.
Please possible to put all the descriptions: size of the wood like length., width and height. Possible to focus the screws and the locks you made. Thank you in advance 🙏
Hi, we just saw a few videos and tried making our own frama.
thanks for sharing the video. I am from Nepal, where are you guys from ?
We are from Bangalore, Karnataka
@@aslampashak8658 is there any rammed earth workshop training ?
When cement is added, which properties of the wall are improved?
Cement is the common stabilizer while planning stabilized mud blocks (SMB), Cement and lime are stabilizers in our construction.
For your reference
Book Name: Building with stabilized mud
Author Name: K.S. Jagadish
refer page-6 and page-64.
ये वीडियो कहा का है
Sample making and testing was done in Bangalore (Karnataka).
असलम भाई आपके पास rammed अर्थ हाउस बनाने के लिए टीम है क्या
No, it's a new experience for us in the field of rammed earth construction.
You can refer to the below mentioned book for more information
Book Name: Building with stabilized mud
Author Name: K.S. Jagadish
Thank you...
thanks for the video . I really liked the technique. Does the wall resist humidity? If it hardens with the cement they put on it? how long to dry?, What is the measurement in inches of the mold?, thank you.
Hi, Yes it resists humidity, using cement will harden it and we have tried it for the 1st time, complete one night we have left it to get dried, 60 inches long, 16 inches thick and 24 inches height
Is it cost effective?
Yes, rammed earth wall cost is less compare to conventional construction cost
Sou fã deste tipo trabalho!
Uma pergunta, qual é as medidas dessa forma ( taipa )?
thank you, the rammed earth sample size is 24 inches(height) x 18 inches (thickness) x 60 inches (length).
@@aslampashak8658 valeu obrigado!
How deep is the foundation or there's no need for?
th-cam.com/video/2aSEDN2tc3g/w-d-xo.html
We need to do the foundation before making the rammed earth walls.
How to operate this machine
We have rammed the soil mixture manually.
@@aslampashak8658 ok thank you bro all the best
Sir please guide me.....
1.Which material is used to plaster in outer wall side ( to protect rain )
Give me composition of material.
2.can we used clay roof tiles with Earth Rammed house?
3. Rate of construction Rammed earth wall?
1) We are not using any external coating for now(we are planning for that) but we have elevated the roof 3 feet outside the building and 3' feet towards the courtyard in our Building-1 so that direct rain water falling on the walls is avoided.
For making sample we have used different proportion of cement, lime powder and soil.
1) Soil 93% and 7% cement
2) Soil 93% and 7% lime powder
3) Soil 93%, 3.5% cement and 3.5% lime powder
For making Building-1 we have used 91% soil and 9% cement and little lime powder we mixed in water to make the perfect mixture.
2) You can try because even we are doing this work based on trial error method for the 1st time.
You can refer Book: "Building with stabilized mud"
author name: K.S Jagadish etc
3) Still our work is under process, we have not yet calculated the cost, we assume 70% labour cost and 30% materials cost.
Please feel free to give the suggestions on rammed earth construction.
Use petrol, kerosene or diesel on the board so that soil won't get stuck on the board, don't use oil because it will get stuck to the wall and will effect the wall treatment with water and it will also block air flow.
@@iamgroot4706
Thank you for the suggestion.
th-cam.com/video/7EACIOUg5Qs/w-d-xo.htmlsi=m0Tcx_ZKUGucpg1O
Latest video
th-cam.com/video/yk5pkREdd9k/w-d-xo.html
th-cam.com/video/4fN1NGDv-bU/w-d-xo.htmlsi=cypAA5RNU4lXZqoy
What is your wall thickness?
18 inch thickness
Aslam bhai aap ka contact number?
You can write to me on My gmail: paslam825@gmail.com