Thanks for this, building a test 80cm dish to try on qo100 before I build the 1.5-1.9m dish. Not sure which one I want, for the cost difference, it'll be silly not to go for the 1.9m :). I found annealing the aluminium with a blow torch made it easier to bend, going to use an induction heater next time, cause it uses quite a bit of gas :).
@@couplingconstant the dish has been tested with stainless steel and the measurement results were good, you can also use aluminum but will rust because it is too thin, especially in a sea climate
Hello bhai nice expairment 👌👌👌👌 bro kitna signals bade modify karne ke baad, Aur seet Kitni lagi is dish,, Aur Kitne fit dish thi pahle Ab Kitni Hui , mujhe bhi dish modify karni hai, meri 5fit hai dish, muje 7fit karni hai, aapka number dena bhai
![บุษบา - เมนทอล [Official MV]](http://i.ytimg.com/vi/IGnWPokSEis/mqdefault.jpg)
SWEET ! Ahhhh, if only I was young again to try projects like this...(and have the tools to do it).....👍
Impressive!
Thanks for this, building a test 80cm dish to try on qo100 before I build the 1.5-1.9m dish.
Not sure which one I want, for the cost difference, it'll be silly not to go for the 1.9m :).
I found annealing the aluminium with a blow torch made it easier to bend, going to use an induction heater next time, cause it uses quite a bit of gas :).
the bigger the better , and you have more gain.
www.qsl.net/pe1rju/Big_Dish.htm
In 15feet dish how many segment we can use in think 42
Nice work 👍
Echt het knap werkstuk maar tegenwoordig heb je een complete schotel set uit China voor 20 us dollar voor de c band kant en klaar bouwpakket
Does it works for band c? What kind of deco do u have?, What satellite Do u direct.
it also works on the C band.
I use this dish for land connection, I do not use a satellite. I do not use a decoder. it is for radio amateur use
How do makeing dish plz sent video sir
73`s de HB9HAL
What kind of mesh, I´ll be glad for your answer, i am from Peru.
I use stainless steel mesh with an opening of 3 mm
@@pe1rju Isn't stainless steel a bad conductor? How about using an aluminum mesh? Would that be too expensive?
@@couplingconstant the dish has been tested with stainless steel and the measurement results were good, you can also use aluminum but will rust because it is too thin, especially in a sea climate
Hotbird 13° India mai kitne feet dish pe Chale gi
Dont u need a LNB?
Hello bhai nice expairment 👌👌👌👌 bro kitna signals bade modify karne ke baad, Aur seet Kitni lagi is dish,, Aur Kitne fit dish thi pahle Ab Kitni Hui , mujhe bhi dish modify karni hai, meri 5fit hai dish, muje 7fit karni hai, aapka number dena bhai