Macrame necklace|macrame necklace tutorial|part 1|Diy
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Macrame necklace|macrame necklace tutorial|handmade jewelry|Diy
the waxed thread is 1 mm in size
Necklace material:
1 x 70 cm
13 x 70 cm
1 x 60cm for the other side of the necklace
1 x 60 cm
1 x 40cm berley on the other side of the necklace
1 x 40 cm
1 x 80cm for the other side of the necklace
1 x 80 cm
One bead size 10mm
1 x 25 cm
necklace lock
********************
Step by step necklace tutorial:
Necklace 00:00
Start weaving with a 70 cm thread 0:10
13 Knit another 70 cm thread on a thread 0:29
Thread the 10 mm nut into the thread 2:22
Dividing the thread into three groups 3:11
The texture of the lower part of the necklace 3:21
Knit the 2 threads that we left aside, one 11 and one 25 8:53
2 Attach the thread to the bottom of the necklace 10:48
Set aside 2 more threads from the plain weave of the necklace 13:06
And we finish the bottom of the necklace
We start weaving the top of the necklace 15:13
Cut the excess threads and burn them 36:33
Thanks for watching the video and sharing
*************************
• macrame earrings
Earrings tutorials
• macrame bracelet
Bracelet tutorials
• macrame ring
Rings tutorials
• macrame necklace
Necklaces tutorials
• 📌All tutorials
For the Seasons
• macrame anklet
Anklet tutorials
*****************
#necklace#tutorial#diy#macrame
Muy hermoso. Bello. Muchas gracias.
Gracias💟
Muy bello y delicado trabajo 👏👏👏👏👏 soy Argentina mil cariños🌹💕💕💕💕
💟💟💖💖
Πανεμορφο!!!❤❤❤
💟💟
Lindo lindo gracias 🍀🥰
💖💖💖
درود بر شما
فوق العاده زیبا و شیک 👍👏👌
ممنون💟💟
Hola! Saludos desde La Habana, Cuba .. hermoso trabajo .. felicidades ! Quería saber por favor si puedo usar Hilo cola de rata o hilo chino.. gracias!
Hello! Greetings from Havana, Cuba ... beautiful work ... congratulations! I would like to know if I can use rat tail thread or Chinese thread. Thank you
Hello dear, you can use any thread, just the thread should not be too thick, not thick, I used size 1 waxed thread. Thanks for watching the videos❤❤
Beautiful❤
My mum wants me to make her this necklace, the problem is she wants it without the bead. Is it possible to do it without the bead?
Hello dear friend,,you have to find something for the middle of the necklace,you have to think how you can do it,,however the work has to be divided into two parts dear😘😘
Por favor coloca o outro lado quero fazer muitos desse modelo, obrigada.
Hello, I will try my best to upload the video for you, thank you
@@Sheidaknots❤
hello, thanks for this wonderful tutorial. However I'm facing some problems :(. To be clear I'm just a beginner ;) and have lots to learn. I used waxed tread 0.5 mm and pearl 12 mm. Still the loop is way too big to fit around the pearl. Where did I go wrong and is there a way to solve my problem? many thanks in advance for any help and advice you can give.
Hi,,thanks for your reply,,dear, use one mil thread, and choose 8 mils for your pearls,,or just choose one mil thread,,see if this is enough,,look at my work again,, Especially when I do pearl removal.
When your thread is thinner, you should tie the thread around the pearl, choose the thread of one mill. 😘
Fui muito bem até a metade o lado q não teve tutorial não soube fazer, q pena.
Please repeat and practice, I will upload the other side video soon💖
What type of cprds do you use? When I was a teen we used cotton treads for embroidery and such burning ends wouldn't work for them.
Hello dear, thank you, I used waxed bed thread. 💓💓
What kind of thread do you use? Please be specific. Thanks
Hello, the waxed thread is 1 mm in size