Installing the Atlas BP10000 Baseplate Two-Post Lift in your Home Garage. Stage 3

[@bp8717]

Only video i was able to find where someone walked underneath this model. Glad to hear you can stand at 6'3. Definitely a taller lift than the 9k atlas models

[@thediycontractor7034]

I'm glad this video was helpful to you. You are right it does have extra room underneath. Thanks for Watching!!

[@garysgarage.2841]

Man that came out nice I'll bet that sheetrock was fun getting up that high. I'm doing the same in my garage for more room.

[@thediycontractor7034]

Thanks for Watching! I used a scaffold to install and finish the sheetrock, that made it easier. Good Luck with your project! It will be so worth it.

[@googleuser1006]

How did you wire the 220v I have red white black and ground from the breaker but only green black and white on the motor please help

[@thediycontractor7034]

First make sure your motor is a 220v motor, if so then Red and Black wires are your positive wires they connect one to the Black and one to the White wire the green is your ground it can connect to the white wire. Be sure to check your wiring at the circuit panel or have a certified electrician install it for you, this information is what I have found in some cases in the pass but might not be the same for your situation. Thanks for Watching!!

[@flipthadon4276]

How far is your lift from the garage door?

[@thediycontractor7034]

11ft from the garage door and 9ft from the cabinets. I installed it so I can pull in or back in a vehicle. Thanks for Watching!!

[@nelio59000]

Bonjour messieurs, joli travail de France

[@thediycontractor7034]

Merci. Merci d'avoir regardé!!

[@nelio59000]

Good job

[@thediycontractor7034]

Thanks. Thanks for Watching!! Don't forget to subscribe and share the video.