This link doesn't work. Please post updated link. Thank you for your videos! They've helped me a lot, as this is the first time I'm doing this kind of work.
I was taught about the concave side on almost all mud knives 25 years ago. What I didn’t know was that I could use the non-concave side for feathering. I’ve been using the concave side only all this time for my DIY jobs. Sure appreciate your video as I’m starting to tape/mud my new 1,800sq/ft shop. 😃👍🏼💪🏼
Right on Scully's House! Man I hope your doing well, am I missing your streams? I don;t think I have got a notification in a while. Your a solid dude brother! 👊🔥💨💨💨
Can I ask you why you and others use such a wide blade when joints and tape are no where near that size? I noticed that father has a 8" Marshalltown, but after reading I've heard 10" is a popular size due to it being easier to handle than a 12" blade.
I asked my husband if he knew about the concave side, and he didn't. I don't mind helping with painting projects around here, so I watch your channel all the time for your tips. (PS Are you so used to the work that you aren't aching at night ?? We sure are !!). Thanks, Paul
Honestly the only video I've found for this exactly. sparky by trade, decided to take the time and get into carpentry which just like electrical has many aspects, ive taped before but starting tommorow its going to be more serious (for me) than juts patching holes i make to run pipe lol thank you!
I did notice the concave side, Did my first mud job last week. I did not do the tape though, it was a new constuction house and they taped it. But not a second coat, and did not go over the tape. I jist wanted it covered. The butts were a PITA so left them. Tape job sucked as they likely figured it was a garage and would never be painted. I jist diddnt want my paint to mess with the exposed tape... Just a nitpick, if there is a concave side to the knife (there is) then there is no flat side. That would be a convex side ;) Thanks for the tips
Haha Charles...😂 You’re absolutely right. It was just a way of explaining the concave side to the other (flat) side.😇 it really isn’t flat. Although when pressure is applied there is more of a flat surface then not.👍🏻 Thanks so much for watching and commenting my friend! -Paul
@@PaulPeck I used the same side for applying and pulling it tight though. I will use both sides like you did from now on. Do you prefer the pan over a hawk?
Man,I can always tell a real pro cuz you guys make that look so so so damn easy. Thanks for your channel boss. I need all three help I can get when it comes to mudding so I don't have to sand much... Or none at all preferably... Maybe someday...
I saw in the ither video you mentioned people sealing the drywall before mudding. I have never done that except for once when I applied popcorn. That being said and with possible problems being moisture from the pool, would have been a good idea to seal this ceiling? If not, what is to prevent the same thing happening again?
I am just trying to do a few joints in my house. I bought a 12” knife. When I stand the knife up on its edge on a flat surface the middle is not touching. Is it supposed to be like that? It’s not exactly what you are talking about here. I just feel like this would cause the edges to dig in really bad.
Just watched your video, i’m in Scotland, i just think its a bit quicker with two trowelled on coats with 11 & 14 inch trowels no edges n a light sand to finish, each to their own, but your blades are good, what make are they?
Wow! That's great info! I always use the flat side but this makes so much more sense! I've used A curved trowel occasionally and this looks like the same concept.. smh that i didn't get it till now! Definitely gonna use it that way next time!! thanks Paul!!😊
I love your videos which have been very helpful. Thank you. Do the same rules apply if you are doing a skim coat over sheetrock on a ceiling repair? Thanks again.
Depends on the patch. If the whole patch needs mud your gunna use the non concave side applying pressure on one side and working all the way out so you don't have a line
It's a feeling and nothing else. Not to take away from ANY of this. I'm a baby in this world of contractordom. You feel the concave and it does flow but your hands will flow as well. The blade; even against corners and corner beads will flow as long as this process you're showing us is followed and your keep your hands with the curve
I didn’t know that ‘awesome to know “please keep me posted I do some drywall and always want to get better. Are all knives con caved? Or what is the best brand to buy?
So you don't sand before texturing? I have been but I'd love to skip that. Most of my jobs are knock down. Thank you so much for posting these. It makes me a better asset.
Hey Chad!💥👊🏻 I don’t sand because all my edges are pulled super tight. I will go around with my 6” taping knife and scrape any ridges or hi spots. I also carry a pencil around and mark any areas I see that needs mud. The I’ll go around one more time and hit those areas super tight again.👍🏻 Thank you so much for watching and commenting!😎 -Paul
I heard about concave/convex blades and looked at mine, but they look the same, completely flat. Maybe it’s my eyes, or the brand I use (Quinn, from Harbor Freight.)
I’m a finisher and I’m ngl, I’ve never seen anyone use green lid all purpose for coating. That’s normally just a taping mud. It’s also a lot harder to sand because of the glue that’s in that mud. I tape with the all the all purpose and coat with the plus 3. IMO the plus 3 is a lot smoother and twice as easy to sand
I think I might apply too much pressure in the concave side, if my knives have one. Seems like the knives being do flexible, it is easy to apply too much pressure.
The funny thing is that I have the same exact knife but the sticker is on the other side or the conclave side. So if your watching this video and asking yourself why it’s not working the same then check what side your sticker is on.
I’ve been a taper for 8 years now and everyone that I know around here already knew about it and we use both side. And not sure if you were doubling (2nd coat) or what but looks way different then what we’re used to lmao and get a hawk and trowel like a real taper
well darn. I never noticed, and I've gone through about 8 or 9 gallons of premix joint compound. thankfully pretty much all the work I was doing was repair work, so not knowing about the concave isn't such a stinker.
the concave side does not the sticker side! it can be bent either way. I prefer a flat knife because then I can use either side and get the same results. I don't want to think about which way the knife is bent because this is distracting and would slow me down. I have 15 years experience is the finishing business
If you look at the handle of the knife one side should be smooth and the other side should have a logo on it thus eliminating the need to mark it to distinguish one side from the other
So true @mrtv77. I always try and show my customers that I respect and pay special attention to protecting their things. Actually, it’s one of my selling points when I go and do the initial estimate on a project.👍🏻 Thanks for watching and commenting! 😎 -Paul
Haha @Michele Ringrose...😂 Yes covering and protecting makes a job go so much smoother! The customers happy and I’m happy! 💰 Thanks so much for watching and commenting! -Paul
Here's the first video where I show how to embed the FibaFuse drywall tape: th-cam.com/video/MKdlKgSjwJk/w-d-xo.html
This link doesn't work. Please post updated link. Thank you for your videos! They've helped me a lot, as this is the first time I'm doing this kind of work.
I was taught about the concave side on almost all mud knives 25 years ago. What I didn’t know was that I could use the non-concave side for feathering. I’ve been using the concave side only all this time for my DIY jobs. Sure appreciate your video as I’m starting to tape/mud my new 1,800sq/ft shop. 😃👍🏼💪🏼
The channel has so many great aspects. I've learned a ton from Paul. He comes highly recommended.
Right on Scully!💥👊🏻 I really appreciate your support my friend!😎 -Paul
Right on Scully's House! Man I hope your doing well, am I missing your streams? I don;t think I have got a notification in a while. Your a solid dude brother! 👊🔥💨💨💨
Superb video!
You explain the what, why, and how.
Very clearly.
From DIYers like myself, thank you.
This guy makes it look simple folks watch and learn from one of the best!
I've been using my 12" knife for 16 years and didn't know there was a concave/convex side. Who knew?! Thanks Paul and TH-cam.
Can I ask you why you and others use such a wide blade when joints and tape are no where near that size? I noticed that father has a 8" Marshalltown, but after reading I've heard 10" is a popular size due to it being easier to handle than a 12" blade.
Never knew about the concave side verses the convex side. Thank you so much Paul! Now I can properly finish my bedroom. 🤩
I knew about the two sides from other videos, but I think you're the first to show using the convex side to smooth.
I asked my husband if he knew about the concave side, and he didn't. I don't mind helping with painting projects around here, so I watch your channel all the time for your tips. (PS Are you so used to the work that you aren't aching at night ?? We sure are !!). Thanks, Paul
That’s awesome Kathy!🔥 I really appreciate your feedback! 👍🏻 Haha.. I do get a little sore every once in a while!😇 -Paul
I didn’t know the difference between the two sides. Thanks for the tip. Big difference on finish.
Honestly the only video I've found for this exactly. sparky by trade, decided to take the time and get into carpentry which just like electrical has many aspects, ive taped before but starting tommorow its going to be more serious (for me) than juts patching holes i make to run pipe lol thank you!
Is it pretty standard when you buy a knife at Lowe’s and Home Depot for the sticker to be on the concave side?
I did notice the concave side,
Did my first mud job last week. I did not do the tape though, it was a new constuction house and they taped it. But not a second coat, and did not go over the tape. I jist wanted it covered. The butts were a PITA so left them. Tape job sucked as they likely figured it was a garage and would never be painted. I jist diddnt want my paint to mess with the exposed tape...
Just a nitpick, if there is a concave side to the knife (there is) then there is no flat side. That would be a convex side
;)
Thanks for the tips
Haha Charles...😂 You’re absolutely right. It was just a way of explaining the concave side to the other (flat) side.😇 it really isn’t flat. Although when pressure is applied there is more of a flat surface then not.👍🏻 Thanks so much for watching and commenting my friend! -Paul
@@PaulPeck I used the same side for applying and pulling it tight though. I will use both sides like you did from now on.
Do you prefer the pan over a hawk?
Did not know about the concave side. thx for the info. I'm committed now to subscribe 👍
Man,I can always tell a real pro cuz you guys make that look so so so damn easy. Thanks for your channel boss. I need all three help I can get when it comes to mudding so I don't have to sand much... Or none at all preferably... Maybe someday...
I saw in the ither video you mentioned people sealing the drywall before mudding. I have never done that except for once when I applied popcorn.
That being said and with possible problems being moisture from the pool, would have been a good idea to seal this ceiling?
If not, what is to prevent the same thing happening again?
I am just trying to do a few joints in my house. I bought a 12” knife. When I stand the knife up on its edge on a flat surface the middle is not touching. Is it supposed to be like that? It’s not exactly what you are talking about here. I just feel like this would cause the edges to dig in really bad.
DANG!!! I checked my 12'' knife, and it does have a concave side (on the lable side too). Thank you for the tip... I subscribed to your channel.
Not aware of that feature, Paul. Thanks for pointing that out. Just got some fibafuse. Can't wait to try it out. Thanks for the tip.
That’s awesome Martin!💥👊🏻 Let me know how you like the FibaFuse man!😎 -Paul
So many new knives seem to be flat. How would you/can you add a bend to it yourself? Thanks!
break it in if you flip the knife hes using arround and tape for a few hours the concave is gonna be on the other side
Just watched your video, i’m in Scotland, i just think its a bit quicker with two trowelled on coats with 11 & 14 inch trowels no edges n a light sand to finish, each to their own, but your blades are good, what make are they?
Saw another video yesterday that mentioned 4 inch taping knives have this too and wanted more info on that. This video was helpful, thanks!
They all have some degree of concavity….. Even a 2” knife
How are you getting mud on only part of the knife and how are you sliding the knife to prevent the mud from dripping off the side and falling on you
Wow! That's great info!
I always use the flat side but this makes so much more sense! I've used A curved trowel occasionally and this looks like the same concept.. smh that i didn't get it till now! Definitely gonna use it that way next time!! thanks Paul!!😊
Glad it was helpful! Thanks so much for watching and commenting! -Paul
Great tip. I never knew.... that will save me some time. Thanks for sharing. Great channel
That’s awesome Y John!👍🏻 I appreciate that man!😎 -Paul
I love your videos which have been very helpful. Thank you. Do the same rules apply if you are doing a skim coat over sheetrock on a ceiling repair? Thanks again.
Depends on the patch. If the whole patch needs mud your gunna use the non concave side applying pressure on one side and working all the way out so you don't have a line
Concave side pushed flat on the flats, bow of the concave side to the wall on the butts, always came out best that way
How do you reuse and clean your drop cloths for drywall work? Mine always have clumps of mud from drops and get super dusty
i dont use any cos im not good like you , but that wire was annoying me as well lol , nice work paul ,
Haha... I kow right! You know all about annoying wires lately I'm sure Neil. Thanks for stopping by bro! -Paul
It's a feeling and nothing else. Not to take away from ANY of this. I'm a baby in this world of contractordom. You feel the concave and it does flow but your hands will flow as well. The blade; even against corners and corner beads will flow as long as this process you're showing us is followed and your keep your hands with the curve
A lot of people don't explain both side. Thanks
I didn’t know that ‘awesome to know “please keep me posted I do some drywall and always want to get better. Are all knives con caved? Or what is the best brand to buy?
Your experience is showing, didn't have TH-cam when I started this trade
So you don't sand before texturing? I have been but I'd love to skip that. Most of my jobs are knock down. Thank you so much for posting these. It makes me a better asset.
Hey Chad!💥👊🏻 I don’t sand because all my edges are pulled super tight. I will go around with my 6” taping knife and scrape any ridges or hi spots. I also carry a pencil around and mark any areas I see that needs mud. The I’ll go around one more time and hit those areas super tight again.👍🏻 Thank you so much for watching and commenting!😎 -Paul
#DrywallTube
So use the non-sticker side to apply mud and the sticker side to take the mud off/ smooth out
I heard about concave/convex blades and looked at mine, but they look the same, completely flat. Maybe it’s my eyes, or the brand I use (Quinn, from Harbor Freight.)
I’m a finisher and I’m ngl, I’ve never seen anyone use green lid all purpose for coating. That’s normally just a taping mud. It’s also a lot harder to sand because of the glue that’s in that mud. I tape with the all the all purpose and coat with the plus 3. IMO the plus 3 is a lot smoother and twice as easy to sand
I think I might apply too much pressure in the concave side, if my knives have one. Seems like the knives being do flexible, it is easy to apply too much pressure.
Many newer big box store drywall knives are straight... without a concave side.
My 45 year old Red Devil (with a wooden handle!) does! 🤗
I haven’t seen a straight one.
Another clean and precise work
Hey there Annie!✌🏻 Thanks so much for watching and commenting my friend!😎 -Paul
What taping knife is this? Pretty sure my marshalltown doesn’t have a contoured side
I knew about the differing sides, but only used the non-concave side before. I was conditioned to do so. But will definitely try your method
That’s awesome Mark!👍🏻 Let me know how it works out for you. Thanks so much for watching and commenting!😎 -Paul
@@PaulPeck pp Moo mop la la my mi
Is that the same with all knife lengths or just the 12
I never connected the sticker and the concave. Thanks
Alright man I think I got it Paul, thank for these vids man I really appreciate it! 🔥👾👊
Looking forward to watching your videos! DutyRon sent me over to say hi! He has some very good things to say about you!!! :)
Never look at the knife, excellent tip for today. I will be putting it to use the next time I drywall
Right on Donald!💥👊🏻 Let me know how it goes. I really appreciate you watching and commenting my friend!😎 -Paul
Hi Paul I'd like to see how you finish your butt joints into factory bevel edge thanks.
Thanks, Paul, very helpful as always! 👏👏 Noticed the concave side but did not realize how useful it could be, just a DIY’r here!
That’s awesome Michele!💥👊🏻 Thank you so much for watching and subscribing my friend!😎 -Paul
The funny thing is that I have the same exact knife but the sticker is on the other side or the conclave side. So if your watching this video and asking yourself why it’s not working the same then check what side your sticker is on.
Nice work buddy
Right on man!💥👊🏻 Thanks so much for stopping by bro!😎 -Paul
I know about the concave side. Use it occasionally if it calls for it. Otherwise, the side that has my groove....
That’s how I roll to Sherry!💥👊🏻 Thanks for watching and commenting my friend! -Paul
I’ve been a taper for 8 years now and everyone that I know around here already knew about it and we use both side. And not sure if you were doubling (2nd coat) or what but looks way different then what we’re used to lmao and get a hawk and trowel like a real taper
Didn’t know about this feature, but i usually use my 12” curved trowel for the big coat.
Such a smooth and sleek job! Years of experience pays off 👍 #DrywallTube
I really appreciate the support Suzy!💥👊🏻 Thanks so much for watching and commenting my friend!😎 -Paul
well darn. I never noticed, and I've gone through about 8 or 9 gallons of premix joint compound. thankfully pretty much all the work I was doing was repair work, so not knowing about the concave isn't such a stinker.
Awesome man!👍🏻 Thanks so much for watching and commenting!😎 -Paul
Um... I think I might have once thought the knife was bent. I tried to straighten it. Thank you.
Did not know about the concave side
Nice job thank you..
Right on flowman!💥👊🏻 Thanks so much for watching and commenting man!💥 -Paul
You just keep teaching me something new!
That’s awesome Pete!💥👊🏻 I really appreciate your feedback! Thanks so much for watching and commenting my friend!😎 -Paul
Not one of my knives are concaved. Marshalltowns, Level 5's, tape tech and kraft. Well dewalt too but they are really level 5.
I really like your work..you have a amzing knife..
Why thank you Mary!👍🏻😎
Watching this video was like hearing finger nails on a chalk board
Complimenti, ottimo lavoro.
Thanks bro!💥🔥
the concave side does not the sticker side! it can be bent either way. I prefer a flat knife because then I can use either side and get the same results. I don't want to think about which way the knife is bent because this is distracting and would slow me down. I have 15 years experience is the finishing business
I knew that all taping knives have a concave side.. but i only use the other side to smooth
I hear ya Rogelio!💥👍🏻 Thanks for watching bro! -Paul
Paul Peck DrywallTube what would u use the other side for besides feathering a joint
You. Took all the mud back off
My knife kept making lines in middle. I cleaned it, so this concave could be the problem.
Yes that could do it for sure Los.👍🏻 -Paul
@@PaulPeck thank u
I was shown to use both because I aprentice under two different companies.
Mind blown.
I literally didn't notice
Top ❤
I had heard about it...however I have always just concentrated on finger placement? Mmmmmm
Hey there Cw!💥👊🏻 I hear ya man! It is perfect for diyers on the factory joints though. Thanks for stopping by bro!😎 -Paul
never knew that about the knife
Ugh I love my job 🤦🤦🤦😄
Will remember for next time... and when sticker goes.. will put tape
Right on K.A.!💥👊🏻😎
If you look at the handle of the knife one side should be smooth and the other side should have a logo on it thus eliminating the need to mark it to distinguish one side from the other
Damn.. forgot about that
I've been doping for 45 years & I can show you alot better way than what your doing! Your working to hard...
Why did you put down plastic? Your work is so perfect you're not getting anything on the floor 😂
It reassures the customer you care about their property. 😀
Watch closely, he did drop a few blobs! 😁 Still a very helpful video! 👏 The plastic is an inexpensive, yet professional, touch.
@xephael 😂 Thanks for stopping by bro!💥👊🏻 -Paul
So true @mrtv77. I always try and show my customers that I respect and pay special attention to protecting their things. Actually, it’s one of my selling points when I go and do the initial estimate on a project.👍🏻 Thanks for watching and commenting! 😎 -Paul
Haha @Michele Ringrose...😂 Yes covering and protecting makes a job go so much smoother! The customers happy and I’m happy! 💰 Thanks so much for watching and commenting! -Paul
I use the concave side 99% of the time
you need to be a little closer to the cieling buddy
🍻🍺
Right on KONAMAN!💥👊🏻😎
When you want to learn how to do it right let me know been doing it 40 years and you take two God damn long
Who doesn't know this?
#DrywallTube
Love it Jim!💥👊🏻 I really appreciate that!😎 -Paul
@@PaulPeck You're welcome sir 🤠
#Drywall Tube...
Love it Sherry!!!🔥😎