Nice video peter... You are genius and supportive to customers... Provide help in return customers will help you purchasing from you... Great video friend..
hi peter . i have the F2100B controller on my plasma . the one problem is the after the first cut the machine doesnot stop cutting, it lift the torch and moves to the second cut still cutting , i change a 9 pin relay , the dealer recon it is sticky , it work for a little wail. not satisfied , is there same other problem the i must look at . thanks danie
hello, I have checked all the parameters that you have mounted, my machine has not even 1 month of operation. however I still have the same problem, I point out that it happened suddenly. would it be a problem due to the (voltage devider ) ?. because I noticed two small changes on my machine. firstly the height of the torch does not correspond to that given on my controller, secondly the power of the flame is low even if I increase the voltage. I use an XPTHC-400-PT as a controller
@@bernabecortes4159 hola buenas tardes amigo neu, yo tambien tengo este problema. desconectaste todos los cables y volviste a conectar? espero poder ayudar
Nice video peter...
You are genius and supportive to customers...
Provide help in return customers will help you purchasing from you...
Great video friend..
hi peter . i have the F2100B controller on my plasma . the one problem is the after the first cut the machine doesnot stop cutting, it lift the torch and moves to the second cut still cutting , i change a 9 pin relay , the dealer recon it is sticky , it work for a little wail.
not satisfied , is there same other problem the i must look at .
thanks danie
hello, I have checked all the parameters that you have mounted, my machine has not even 1 month of operation.
however I still have the same problem, I point out that it happened suddenly.
would it be a problem due to the (voltage devider ) ?. because I noticed two small changes on my machine. firstly the height of the torch does not correspond to that given on my controller, secondly the power of the flame is low even if I increase the voltage.
I use an XPTHC-400-PT as a controller
thank you
hello dear, i still have this problem in my plasma right now, can you help please
I NEED SOLVE MY PROBLEM TORCH TOO LIFT UP AFTER CUT START PLEASE HELP ME
Hello
can you help me
I have a problem that CNC plasma is working but no arc
Am also experiencing same problem. Have you solved it. If yes how did you do it?
My machine is not working due to arc break alarm ,how to solve this problem
Have you solve arc break issue
Have you solved this issue? If yes, how did you solve it?
Hwllo dear, i have this problem with my plasma ...it s possible to help me please?
I try all off this but i still have ARC Bk problem, can you help me please?
Let me know please, I have also the problem & have checked all options but not been able to solve it.
@@junaidrafeq87 hi, did you find solution ??
. hi did you find solutions?
Our CNC machine is not working due to arc bk error. How to solve this problem
La solución es sencilla reviza que todas las conexiones que van al fuente este bien conectadas
A nosotros nos paso igual faltaba conectar el cable que produce el arc
Y la conexión del cable de control no estaban haciendo buen contacto
@@bernabecortes4159 hola buenas tardes amigo neu, yo tambien tengo este problema. desconectaste todos los cables y volviste a conectar? espero poder ayudar