merci, récupération du four d'une 510 pour le mettre dans une 610 réussie grâce à votre vidéo. sans vous j'aurais attaqué le démontage à l'envers et aurai sûrement cassé plus de plastique ;).
I wouldn't bother to change the transfer roller unless the print quality is poor. You need to squeeze in two plastic clips at each end of the roller. The roller then springs up a little and can be removed. The spring at the right side of the roller is not fixed and can become dislodged. It sits on a plastic post that you can't see. Make sure to fit the new left hand bush on the new roller the correct way round. It's easy enough after you've done it a few times but can be a little fiddly the first time.
@@garylacey7435, underneath the printer. I am getting a replace maintenance kit error and a load paper error when paper is loaded. I cleaned them and it seems to work a bit better but i think the rollers still need replaced. and im not sure about the maintenance kit error
@@daniellewatson3500 It's the same procedure as this video I found: infoserve.lexmark.com/ids/idv/video.aspx?category=Multifunction+Products&productCode=Lexmark_MB2442&topic=v46537447&vId=MS62x_MX62x%2Flexmark_replacing_the_pick_tire_mfp_video&ar=16%3A9&ap=1&l1=4&l2=2&sh=791&sw=1781&loc=en_CA You can clear the replace maintenance kit error but you might find the print quality starts to deteriorate or the paper starts jamming in the printer.
Thanks for this video. So many steps just to change a Fuser.
Yes, it's not the quickest or easiest fuser to replace.
merci, récupération du four d'une 510 pour le mettre dans une 610 réussie grâce à votre vidéo. sans vous j'aurais attaqué le démontage à l'envers et aurai sûrement cassé plus de plastique ;).
Great video thank you for the easy to follow instructions appreciate it very much.
Voice comments would be nice!
How do you change the transfer roll? I've completed the other steps but don't want to break the printer.
I wouldn't bother to change the transfer roller unless the print quality is poor. You need to squeeze in two plastic clips at each end of the roller. The roller then springs up a little and can be removed. The spring at the right side of the roller is not fixed and can become dislodged. It sits on a plastic post that you can't see. Make sure to fit the new left hand bush on the new roller the correct way round. It's easy enough after you've done it a few times but can be a little fiddly the first time.
Hey it's a KM 4000P 8-)
have a video on pick up roller on ms610dn?
Hi Danielle, is it for the multi purpose pickup roller on the front of the printer or the cassette tray pick up rollers underneath the printer.
@@garylacey7435, underneath the printer. I am getting a replace maintenance kit error and a load paper error when paper is loaded. I cleaned them and it seems to work a bit better but i think the rollers still need replaced. and im not sure about the maintenance kit error
@@daniellewatson3500 It's the same procedure as this video I found:
infoserve.lexmark.com/ids/idv/video.aspx?category=Multifunction+Products&productCode=Lexmark_MB2442&topic=v46537447&vId=MS62x_MX62x%2Flexmark_replacing_the_pick_tire_mfp_video&ar=16%3A9&ap=1&l1=4&l2=2&sh=791&sw=1781&loc=en_CA
You can clear the replace maintenance kit error but you might find the print quality starts to deteriorate or the paper starts jamming in the printer.