This used to work, but now for some reason it doesn't want to accept the reset, after pressing up it does nothing, I was able only to reset the black but none of my color cartridges
This just doesn't work. The instruction number 12 "Then Press Here (+) Button for Accepted" doesn't work. Nothing happens when I press that (+) button. And there are also two options: - STD and -HD. What are they and which one to choose?
Actually I cracked it by trial and error, It was the Up Arrow (+) key. In summary. 1) With printer still ON 2) Open the top section (that reveals the cartridges). 3) Press both the reverse button (the lower one to the right of the screen) AND the Exit button (the top right hand button). 4) Then press the reverse button quickly afterwards. You may have trouble at first but it gets easier. 5) Using the + and - buttons scroll down until you identify which cartridge is to be reset. 6) Press the OK button 7) Press the + button to accept. You need to do this for each cartridge.
It helps brother, thank you so much for this video. Keep growing 👍🏻
Most welcome
(+) button does nothing in my case
Thank you, it works.
Welcome
This used to work, but now for some reason it doesn't want to accept the reset, after pressing up it does nothing, I was able only to reset the black but none of my color cartridges
Thank you
Most welcome to my channel
This just doesn't work. The instruction number 12 "Then Press Here (+) Button for Accepted" doesn't work. Nothing happens when I press that (+) button. And there are also two options: - STD and -HD. What are they and which one to choose?
Please follow the instructions carefully
@@FoyazFRahman Yes I follow the instructions carefully, but the (+) button doesn't work. That's the problem.
@@kerubi-007 I have the same problem.. In the past it used to work just like that, but now it wont..
The same problem DCP L3510
Same problem. (+) buttons does nothing on my Brother L3510CDW. Does anyone have a solution ?
I already change my toner black..i rest like thus video..but when i copy its just plain white a4 paper..why
I think Toner is not connect properly with the power board...
I could not understand which button you pressed for "accept" once the yellow cartridge abbreviation had been selected.
Please carefully flow the instructions...
Actually I cracked it by trial and error, It was the Up Arrow (+) key.
In summary.
1) With printer still ON
2) Open the top section (that reveals the cartridges).
3) Press both the reverse button (the lower one to the right of the screen) AND the Exit button (the top right hand button).
4) Then press the reverse button quickly afterwards. You may have trouble at first but it gets easier.
5) Using the + and - buttons scroll down until you identify which cartridge is to be reset.
6) Press the OK button
7) Press the + button to accept.
You need to do this for each cartridge.
Thanks Dear
I apologise for misunderstanding .
Didn’t work music annoying
So stupid music is so loud, headache.,
not professional.😂😂🤣😭🎁
I apologize...
Hello brother, it shows message drum, what is the problem
You mean Replace Drum shown on display ...?
@@FoyazFRahman just
Drum !
Black (bk)/yellow (y)/M/the green tab on Drum unit
@@FoyazFRahman I recently changed colours
Drum is including this toner that's why you need to reset the drum...
Please reset all toner if need...
@@FoyazFRahman rest from settings?