I changed ghe charging board and the flex now the phone show only charging but in the past it shows the estimated time for the full charge and thd charge stop at 86%
If the charging board and flex are good for her. Check the battery. it won't help, measure the charging voltage on the ic u6003 and u6000 it will be bad.
first try to replace the main flex, it won't help, then look at the motherboard, the connector where the flex connects will be damaged.@@chandabwalya2093
It worked 😍😍 Thx u bro
You're welcome.
Thanks, you made me save a lot of money !
You're welcome.
Thank u very much it work ❤️🤲
You're welcome.
it works thx a lot youre the king
TYSM THIS HELPED SO MUCH
You're welcome.
Thanks bro...Hope your channel will grow.
I think through this line 1.8 v comeing. Ultimate work. My Problem solved.
Hello. Good that you solved the problem.
It worked 😍😍 may god bless u brother 😍😍
Same issue, Tried new battery, did not work, tried new charging board, did not work, I hope changing or fixing the flex fixes the problem.
Try the new main board connection
Does changing flex files worked
What is that tool you're using to unscrew the screws? 1:14
TBK 008 Electric screwdriver.
@tomasitasovc9372 thank you
Gracias bro, hice un Jumper y quedó perfecto.
You're welcome.
Why didnt you just change the flex cables from charging port to motherboard instead of soldering?
Hello. So it was possible to replace the flex and the same problem would have been solved. but I wanted to show the exact failure of the flex.
my a52s uses A526U flex cable, is it okay to replace it with A526B?
Hello. Can use A526b flex will work.
@tomasitasovc9372 it has no effect?
Does it worked
Are you are using your phone with temperature warning
@harshrajrajput624 I haven't changed it yet... I was afraid that maybe I might damage my phone😂 but I will try it tomorrow
Thanks for your support
You're welcome.
tanks❤❤❤
You're welcome.
Great
Thanks
He tenido ese problema con un a52s le cambie 2 veces el modulo de carga y me tira ese fallo sera el flex intermediario el que me causa ese daño?
Hello. Have you tried changing the main flex.
Do I have to get a new one do I use the same yellow strip
Hello. So it was possible to replace the new flex and the same problem would have been solved. but I wanted to show the exact failure of the flex.
Did you replace the whole thing or fixed it, kindly clarify???
i fixed this flex.
@@tomasitasovc9372 how did you fix the flex your video doesn't show that, please explain.
@@ikenonso1 video in 2m:40s. photo shown. where the track goes from pin 4.
thank you!
You're welcome.
Bhai Mera Mob A72 83% se Agy Charge Nahi Ho Raha ???
buying a new flex also solves the problem?
In my case yes. It was a flex problem. And I fixed the same flex.
What did you do sir?
I’m lost too
Whats the name of the part you changed?
I fixed the main flex. I soldered track 4. You can try changing the main flex.
I changed ghe charging board and the flex now the phone show only charging but in the past it shows the estimated time for the full charge and thd charge stop at 86%
If the charging board and flex are good for her. Check the battery. it won't help, measure the charging voltage on the ic u6003 and u6000 it will be bad.
Temperature too low. i am changing cardboard but not working
Hello. Try to change main flex.
Have the same issue and i already biy a new flex cable but the problem is still there
Hello check the connectors where you connect the flex: main board connector or charging board connector. The charging port may also be damaged.
@@tomasitasovc9372hey, I changed the port today and the problem still exists :(
@@tomasitasovc9372i dont know what to do i dont understand this i changed everything bro i dont get it :(((
Did you replace only the charging port or the entire charging board?
@@tomasitasovc9372 the entire
Its work 🙏🏼
You're welcome.
I have a54 5g, not charger temperature, not solution!!! :/
Hello. Samsung A54 I have not repaired. But try replacing charging board or main flex.
браво!🍺
👋👋
👍👍👍
So what's the main issue which causes this
the problem is that the fourth contact track of the main flex has broken off.
@tomasovc5906 mine I have changed the charging board but the problem is just the same,could this help or its the motherboard which has a faulty
Even the headphone jack is not working
first try to replace the main flex, it won't help, then look at the motherboard, the connector where the flex connects will be damaged.@@chandabwalya2093
@@tomasovc5906alright so the headphone jack might start working if I replace the main cable?
i do it. it work... but when i charge only one side，another side no work..
Replace charging usb c connector or replace charge board.
i already change new c connector.. same problma.. one side work.. it is enough 😊
Buying new flew but problem not solved.
Hello, try replacing the charging board port dock, and it still doesn't help, check the main board connector contacts where flex joins.
Fake solution
Tnx
Hello
Tested solution
Oi
Subcrice
trim,s
Hello.
🇧🇷🇧🇷
Itu di apain?
di kerok.. masuk angin kalii
Don't work
replace with a new flex or charging plate.
Brother ,, what did you do really... I don't understand . Scratch and jumper or cut the line .. plz reply me 😩
hello. Scratch and jumper.
@@tomasitasovc9372 just jumper . That's line also connection working.. then re-jumper
@@raavanraone5564 just jumper.
it does not help, try to change another main flex.
@@tomasitasovc9372 ok brother
didn't work
Try to replace the main flex or charging plate.