Subaru Outback Power Steering Rack Replacement
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- This 2008 Subaru outback is getting a new power steering rack. If you are replacing your steering rack on a 2005-2009 Outback this is the right video for you.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTS LIST:
▪️ Power steering rack: amzn.to/481KqtT
▪️ Outer tie rods (optional): amzn.to/4bq2lgB
▪️ Power steering fluid: amzn.to/3SPfbg7
▪️ Exhaust gasket: amzn.to/3w7sqRp
🛒TOOLS NEEDED:
▪️ Line wrench set: amzn.to/49h8zxG
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ 1/2 Impact: amzn.to/3Sfmiht
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Electric ratchet: amzn.to/3Sw4W12
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.
This is exactly what I needed for my 06 Legacy. Thank you for this. Truly can find anything on the internet.
This is almost a perfect video... found out the hard way doing this on a 2003 forester. Looks like same rack. TAKE OFF THE INNER TIE RODS. I wish i had done that. Now i either have to drop the whole subframe or remove the sway bar which is a pain or bolt the rack back in and remove the inner tie rods...other wise the rack aint coming out....
nice detailed vid. about to rebuild my 08 legacy rack.
Disconnect the sway bar to body brackets to get the sway out of the way before
I thought you should leave that nut on for the tie rod so you you how far to put the new one on (more accurate than counting turns).
@@MrMasterFlash Thanks for your comment. The new rack will have new inner tie rods with new nuts. They won't be in the correct spot. Counting turns will get you close but getting an alignment is required after this repair 👍
What replacement rack do you recommend for a 2007 H6 Outback? OEM is 3x more expensive.
The 2014 is completely different =[ .... there are no brackets to remove ... the steering rack is on top the chasey I have no clue how to unscrew the bolts/nuts and pull it out do you have ideas sir?
This job going to be the same on a 2011 Forester? Thanks
So...my alignment is off before starting- steering wheel is at almost 1 o'clock when wheels are straight. Is this going to affect how the rack is centered? And could an alignment after the install fix this?
centre your steering wheel once the rack is off, centre the new rack and then install where the splines align. but if that doesn't work then it's prob the clock spring reset.
Thanks- I was able to do all that and make it to the alignment shop😅 my windshield wipers don't return "home" anymore, but small price to pay after all that
Where to order the power steering?
What are the specific name for those lines on the rack. I can’t find those lines anywhere it all hoses
Power steering hose/line. There is the high pressure line and return line to the reservoir.
Thank you so much
What manual were you using to obtain the torque specs for the reinstall?
Identifix
Do you need to take the steering wheel off?
The steering wheel stays on. You disconnect the column under the vehicle 👍
Why was it replaced?
It was leaking quite a bit from the outer seals.
Another difficult job!
It wasn't too bad. I probably complained more than I needed to. If I would have removed the exhaust from the beginning and got the steering column bolt from underneath it would have saved a lot of heart ache! Oh well, live and learn 🙃
@@ValleyMobileAutomotive that's still very detailed work. I bet you could've done it even faster if that car was lifted up in the air.