ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Long Range Project P1 ! :D - Rotorama Buddy5 + Mamba + Foxeer + TBS + FlashHobby
ฝัง
- เผยแพร่เมื่อ 10 ส.ค. 2023
- When "leaving room for improvement" is an understatement! :D :D
the parts list! :D
Frame: Rotorama Buddy 5" DC
www.rotorama.c...
Motors: FlashHobby Arthur 2207.5 - 2750 Kv
www.flashhobby...
FC: Diatone / Mamba F405MK2 V2
www.diatone.us...
ESC: Diatone / Mamba F45 128K BlHeli32
www.diatone.us...
Camera: Runcam Phoenix v2
shop.runcam.co...
VTX: TBS Unify Pro32 HV 25-1000mW
www.rotorama.c...
Receiver: Radiomaster RP3 ELRS Nano
droneshop.nl/r...
Prop 1: HQprop 5.5x2.2x3
droneshop.nl/h...
Prop 2: HQprop 5.5x3.5x3
droneshop.nl/h...
Lipo: CNHL Black Series 2000mah 4S
chinahobbyline...
---------------------------------------------------------------------------
Support the channel on Patreon!
/ dutchrc
Equipent I use:
Frsky Tandem X20: bit.ly/3iJLaxg
Radiomaster TX16S mkII: bit.ly/3oTcADe
Orqa FPV Pilot.One FPV Goggle: bit.ly/3uCAHZC
Indoors camera: Sony FX30
Lens: Tamron 28-75 2.8
Outdoors camera's:
+ Sony Experia PRO-I
+ GoPro Hero9 Black
+ GoPro Hero10 Black
Tools:
+ Mustool MT826 Multimeter: goo.gl/t7UwWi
+ TS100 portable soldering iron: goo.gl/3w8oCk
+ ToolCraft ST-100D soldering station
+ Steinel Gluematic 3002 hotglue gun
+ several Dremel's
My Instagram page:
/ dutchrc
DutchRC Adventures™.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of DutchRC Adventures. We are not directly affiliated with any of the vendors or manufacturers in this video. DutchRC Adventures is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the DutchRC Adventures film series broadcast on TH-cam is intended for entertainment purposes only.
#DutchRCadventures #RClife #RCfun
When "leaving room for improvement" is an understatement! :D :D
the parts list! :D
Frame: Rotorama Buddy 5" DC
www.rotorama.com/ramy/rotorama-buddy-5-deadcat
Motors: FlashHobby Arthur 2207.5 - 2750 Kv
www.flashhobby.com/a2207-5-rc-brushless-motor.html
FC: Diatone / Mamba F405MK2 V2
www.diatone.us/collections/flightcontroller/products/mamba-f405mk2-v2-fc-1
ESC: Diatone / Mamba F45 128K BlHeli32
www.diatone.us/collections/esc/products/mb-f45_128k-bl32-esc
Camera: Runcam Phoenix v2
shop.runcam.com/runcam-phoenix-2/
VTX: TBS Unify Pro32 HV 25-1000mW
www.rotorama.com/video-vysilace/tbs-unify-pro32-hv
Receiver: Radiomaster RP3 ELRS Nano
droneshop.nl/radiomaster-rp-3-elrs-nano
Prop 1: HQprop 5.5x2.2x3
droneshop.nl/hqprop-55x22x3-propellers-light-grey
Prop 2: HQprop 5.5x3.5x3
droneshop.nl/hq-durable-prop-55x35x3
Lipo: CNHL Black Series 2000mah 4S
chinahobbyline.com/collections/cnhl-fpv-quad-drone-lipo-batteries/products/cnhl-black-series-2000mah-14-8v-4s-100c-lipo-battery-with-tx60-plug?_pos=3&_fid=962363083&_ss=c
Beautiful build, dude! Fantastic flying!!! 😃
It's great to see you again!
About the quad, if you want flight time, you should replace the motors. They're too high kv... 😬
Anyway, stay safe there with your family! 🖖😊
Thanks as always brother :)
and yeahhhh this one took far to long :D the weather has been horrible over here :P
Cheers and have a good weekend!
Try a 4S LiIon pack and see whether it can fly all the way down to 2,8V or even 2,5V. Expect some problems if you don't have a solid conversion for 5V rails.
yes sir! About a 4000mah 4S shound nice to me :) I'll have some shortly.
And good point! nice extra test for that Foxeer FC to see how it regulates things :)
Nice video again! LiIon will help to a certain point, flight-style however will help you gain minutes. Perhaps naked (low-weight) action-cam.
Thanks :) I'll try a 4000mah 4S Lion next.. gotto wait for them to be available
Een goede elco dank Clean video I think micro drones whoops is my think so youre thing.
ja sure.. de Cap is de zelfde als ik altijd gebruik dus kweenie.. et can ook een regulator op de FC zijn..
Misschien doe ik de camera op 5V met een extra cap daarvoor
@@DutchRC cap 1000 UF heb je zeker nodig.....op 5 vold ja je zou het moeten meten met Scoop...hmm new video love them ....
@@dickvancampen3318 et zou wel flauw zijn om der gewoon DJI FPV in te gooien hè? ;) dan is et Zeker weg :D