Installing a 2-post lift on new concreate floor. This space is in old barn. There is still a lot of work to be done to improve the space #2postlift #carlift
Great video, have you ever noticed the top bend in just a little with a heavy vehicle? Curious, mine does maybe 1/2 inch at the top, is that typical? My base is super tight
Absolutely not! Floor Plate lifts have no top cross member to counteract the tendency of the posts to want to collapse inward. Simply distributing weight on metal plates does not do anything to stop the post from wanting to collapse inward. All 2 post lifts need to be anchored into the proper thickness of concrete otherwise you'll have a death wish.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
My lift was advertised as 1 lever for unlocking both safety latches, but it must be like yours, pull a ring on each side, true. Damn crooks.
Good job !
Great video, have you ever noticed the top bend in just a little with a heavy vehicle? Curious, mine does maybe 1/2 inch at the top, is that typical? My base is super tight
The movement of the struts is not visible with the eyes. I haven't measured it. Cars that i lift, not weigh more than two tons.
@@Westcoastdigger thank you!!!! Really appreciate the help
6" concrete floor?
I don't remember. About 4-5"
Under the posts are 1m2 and 50cm thick concrete
Cik biezs betons vajadīgs? Marka 25-30 der?
8cm vismaz. tik jaudīgs betons nav vajadzīgs.
Marku šeit neatceros, biezums grīdai apmēram 10cm, kā vietām. Zem pacēlāja kājam ir biezākas pēdas.
Ok, tad ar 25 cm esmu on safe side
what did you pump down into the holes?
Glue, chemical anchor.
Hey, i have 10 centimeters of concrete! I will need more 10 right? I can do a "footings" so? To reinforce the lifter?
If the concrete is strong enough and with reinforcement, then 10 cm will withstand the lift.
And use chemical anchor.
If i don't have a concrete floor, can i just lay a very thick steel plate on the floor instead to distribute the wight?
Probably yes, but it's will be really big plate to connect both posts.
Absolutely not! Floor Plate lifts have no top cross member to counteract the tendency of the posts to want to collapse inward. Simply distributing weight on metal plates does not do anything to stop the post from wanting to collapse inward. All 2 post lifts need to be anchored into the proper thickness of concrete otherwise you'll have a death wish.
Muito bom
Quanto custa um elevador novo deste tipo
1500 euro
what size is this garage?
7m long, 6m wide
what is this garage dimensions?
6m wide, 7m long
@@Westcoastdigger Thanks! good to know i have same size garage and seems that i can fit lift there! :)