Hello Paul. Can I use multiscreen without matrocth2go? I have graphic card with 4 hdmi out and so I can conect 4 diferents devices (for example:, 2x screen, 1 projector aln 1 out to ATEM Swich.. Is that work?
Społeczność Chrześcijańska w Dąbrowie Górniczej With ProPresenter 6, you need either a Matrox TH2Go or similar (like a Datapath x4). With pro7, a graphics card with four outputs would work fine.
In Pro6, you can set up an extra wide stage display and show it on two screens (although that's a bit of a hack), but Pro7 takes that to the next level and makes it much better.
You just format a stage display layout that puts the right thing in the right part of the screen. The MatroxDh2go or th2go split the screen and so all of that work is done for you. I have, of course, a tutorial to show you how here: th-cam.com/video/2UakpueBzPo/w-d-xo.html
Let me get this right: purchase TH2GO and MultiScreen module; send one output from TH2GO to my sanctuary projectors and another to my ATEM; use Chroma key to overlay on a camera input (from another of your videos); and just use an alternate template for that output to show up as a lower third? The content on the primary slide automatically shows up on the alternate slide?
I should clarify, that the DH2Go and TH2Go output a signal that the ATEM switchers don't like so you might need an up/down/cross converter in there too.
I just installed hardware and software, I have two monitors and the display only shows my laptop screen and a second very larch display instead of to three displays any idea why?
The Matrox TH2Go and DH2Go both trick the computer into thinking that it has a very wide screen that the hardware then outputs to two or three displays showing part of the large display on each of the connected displays. What you're describing is normal.
Yep. In fact, the TH2Go would NOT work for stage display. You could kinda make something work, but for stage display, the USB adapter is actually a better way to go. Here are the two tutorials I did on it: www.trinitydigitalmedia.com/2015/08/propresenter-6-tutorial-enabling-multiple-displays-churchtechcast-com-screencast-show/ www.trinitydigitalmedia.com/2015/08/propresenter-6-tutorial-the-stage-display-churchtechcast-com-screencast-show/
Can you clarify the question? Are you saying that your 2011 MacPro only gives two screens now? Are you asking if it CAN do more than two? What do you want each screen to have? You need one for control, one for the congregation/audience, then you'd either need one for the people on stage to see (called Stage Display with ProPresenter) and/or multiple different projectors for the congregation/audience. The last situation is what this tutorial is about.
Yep. Arrangements only shows up if the Mac (apple computers only on this one, so if you're using Windows, it's elsewhere) sees that you have more than one monitor/projector/display connected. If you don't see it, the computer doesn't think it's there. If that's the case, you need to check all your connections and make sure you're not trying to send HDMI over a long cable (10-16 meters/34-50 feet or more). Fix that and it should show up unless you've got a computer problem with the graphics card/logic board.
Is one of them really wide? That's the way that it shows on the computer. The TH2Go or DH2Go splits them, BUT you can't use one of them as a stage display, if that's your question, at least not with Pro6.
Hello Paul. Can I use multiscreen without matrocth2go? I have graphic card with 4 hdmi out and so I can conect 4 diferents devices (for example:, 2x screen, 1 projector aln 1 out to ATEM Swich.. Is that work?
Społeczność Chrześcijańska w Dąbrowie Górniczej With ProPresenter 6, you need either a Matrox TH2Go or similar (like a Datapath x4). With pro7, a graphics card with four outputs would work fine.
Can the Stage Display be set up for multi-screen? I would love to have my preview on one screen and my current on another screen.
In Pro6, you can set up an extra wide stage display and show it on two screens (although that's a bit of a hack), but Pro7 takes that to the next level and makes it much better.
@@PaulClifford I've heard that about Pro7. We are working toward that transition. How do I set up the wide stage display? I appreciate your help.
You just format a stage display layout that puts the right thing in the right part of the screen. The MatroxDh2go or th2go split the screen and so all of that work is done for you. I have, of course, a tutorial to show you how here: th-cam.com/video/2UakpueBzPo/w-d-xo.html
Paul Alan Clifford Thank you so much!
Let me get this right: purchase TH2GO and MultiScreen module; send one output from TH2GO to my sanctuary projectors and another to my ATEM; use Chroma key to overlay on a camera input (from another of your videos); and just use an alternate template for that output to show up as a lower third? The content on the primary slide automatically shows up on the alternate slide?
Yep. That's one way to do it.
I should clarify, that the DH2Go and TH2Go output a signal that the ATEM switchers don't like so you might need an up/down/cross converter in there too.
Good to know. Thanks, Paul, I appreciate your service to the community.
@@PaulClifford That's good info, I'm looking at including this with an ATEM switcher. What don't they like? Any cross-converter recommendations?
I am using the TH2go.. I do not see the three boxes in the preferences.
I just installed hardware and software, I have two monitors and the display only shows my laptop screen and a second very larch display instead of to three displays any idea why?
The Matrox TH2Go and DH2Go both trick the computer into thinking that it has a very wide screen that the hardware then outputs to two or three displays showing part of the large display on each of the connected displays. What you're describing is normal.
@@PaulClifford Thank you Paul I appreciate the quick respond
How would I fix the projector when there is 10 screen projecting ??
10 screen?
@@PaulClifford yes when I turn on the projectors there is literally 10 screens projecting 🙁 on the projectors .
@@AnaMartinez-no2ed the screen is divided 10 ways? Are they all identical? I confess this is a new one. I can’t think of a way to do it.
@@AnaMartinez-no2ed is it 10 screens with ProPresenter off too?
@@AnaMartinez-no2ed if that’s the case, it’s probably a projector setting or problem with the signal path.
I download the the software but my iMac is 2017 with high Sierra and I’dont found a software for that
What can I do
ProPresenter 6 works with High Sierra. So, I don't know what you mean.
So we have to pay the multi screen in propresenter plus the th2go?
Yes.
I conect and only one screen shows up
Have you installed the Matrox Powerdesk software?
Paul Alan Clifford yea
Hi, my church uses hdmi tvs. Will the TH2GO work? will I need an adapter to converte DVI to HDMI?
gfacioni it depends on which th2go you get, but if you get the DVI one, then yes, adapters will be necessary to plug it into HDMI only tvs.
Paul Alan Clifford thank you for the quick response. If all I wanted was to have a stage display added, will an usb to hdmi adapter work?
Yep. In fact, the TH2Go would NOT work for stage display. You could kinda make something work, but for stage display, the USB adapter is actually a better way to go.
Here are the two tutorials I did on it:
www.trinitydigitalmedia.com/2015/08/propresenter-6-tutorial-enabling-multiple-displays-churchtechcast-com-screencast-show/
www.trinitydigitalmedia.com/2015/08/propresenter-6-tutorial-the-stage-display-churchtechcast-com-screencast-show/
Paul Alan Clifford thank you
But promac 2011 only gives you 2 screens?
Can you clarify the question? Are you saying that your 2011 MacPro only gives two screens now? Are you asking if it CAN do more than two? What do you want each screen to have? You need one for control, one for the congregation/audience, then you'd either need one for the people on stage to see (called Stage Display with ProPresenter) and/or multiple different projectors for the congregation/audience. The last situation is what this tutorial is about.
I can't seem to see the "Arranges" tab in system preferences, can anyone help??
Yep. Arrangements only shows up if the Mac (apple computers only on this one, so if you're using Windows, it's elsewhere) sees that you have more than one monitor/projector/display connected. If you don't see it, the computer doesn't think it's there. If that's the case, you need to check all your connections and make sure you're not trying to send HDMI over a long cable (10-16 meters/34-50 feet or more). Fix that and it should show up unless you've got a computer problem with the graphics card/logic board.
I'm using a TV but the three windows do not appear in setup
So, if you go to displays in system preferences, what do you see?
Only the two windows together and I can not separate them to use ProPresenter
Do you know what I can do?
Is one of them really wide? That's the way that it shows on the computer. The TH2Go or DH2Go splits them, BUT you can't use one of them as a stage display, if that's your question, at least not with Pro6.