Just a side note, when he says “ensure that your wheel is straight”, it doesn’t matter if your wheel looks straight, if your wheels don’t have a good alignment, the racing stripe at the top will line up. I didn’t realize this, so I did the whole process of readjusting the entire wheel about two or three times. Subsequently, this led to something going wrong with the electronic wiring. I am now unable to use the horn or the end call button. EDIT: After doing more research recently, I am almost certain that my loss of button function was a result of me breaking my clock spring. The clock spring can be see at 4:49 when he removes the wheel. Is is the big black circle. DO NOT SPIN IT. I assume that while doing this install, I must have become bored and decided to spin that around. As a result, my wires broke and now I can’t use the wheel functions.
Yep, T-30 and it needs to be tamper proof (has a little hole in the top). I bought a short arm torx key set but the little piece of metal sticking out in the middle of the bolt prevented me from breaking it loose. Lesson learned. milanmastracci (video url at the end) mentions this specific requirement in his video. Still appreciate all of your content The Carizon!!!! th-cam.com/video/CGjLhYY2Q_Q/w-d-xo.html
Thank you so much for the great video. I went and ordered mine and it just arrived and I got it installed and everything looks good but my only problem is now my airbag light flashes. Is that normal? I reopened everything just to check and everything is plugged in and everything is perfect so I don’t know what it could be? Mine is the exact same car
When you torque the middle main nut back in place, is there a certain amount of pressure or torque needed or do you just tighten it till I can’t can’t be tightened anymore?
Just finished installing a new steering wheel on my Z. They pop into the back of the first metal bracket you took out of the steering wheel. They provide spring tension for the horn. You'll see a black cross on the back of that piece, that's where they pop on to. Probably a little late for you John but hopefully helps others out. 🤪
It's heldbup really well, no discoloration so fat. I try to keep my hands clean. It's probably not italian leather. Something cheaper but I'm not an upholstery expert.
Really? Sweet wanted to do White too match but I've seen some reds even discolor, fade or get dirty without being able to clean off. So that's good to hear you can still keep the White looking Fresh. What material is your white part? Leather?
@@gman2478 keep in mind I often drive with a hand in the 12 or 6 position, I don't handle the leather all the time. The leather is white! And I keep it in a garage.
I do mostly too unless I'm at the strip or doing some sort of racing. So your saying then it is leather? Well if it does get dirty I'm just hoping it can get clean ha. Like I said I've seen some no matter if it was leather, suede or alcantata that it coule not regain it's original look. Appreciate your time & help tho.
Success after a buggered torx bolt... Love easy outs, however be warned... Torx bolts on side of column are case hardened and don't drill out very easy. Suggest Titanium drill bit. Once side torx bolts are off. It's easy as. Much obliged for video tutorial. Well done and thank you. One issue I do have though.... Does anyone have a torque setting for centre bolt......
@@dainepetrou8011 okay cool ty , found some myself. Had to pickup a piece for the dremel tool ended up hollowing out the safety dot in the middle and than use an ez out 👍🏼 put some 10mm bolt with same thread in there and good as new!
@@PoloZ34 sweet as... I dunno why they just didn't do this in the first place. Especially if the make the car and sell the car knowing it will be modified by it's owners anyway....
I just got mine in this week. Absolutely love it. I used your photo at the example photo to show him what i wanted.
Love your videos dude.... you NAIL it when it comes to cutting out the bs, getting to the point, while also being informative. Love it!
That is a mod I will do when the alcantara wears out on the standard nismo wheel. Thanks for the info sir.
Just a side note, when he says “ensure that your wheel is straight”, it doesn’t matter if your wheel looks straight, if your wheels don’t have a good alignment, the racing stripe at the top will line up. I didn’t realize this, so I did the whole process of readjusting the entire wheel about two or three times. Subsequently, this led to something going wrong with the electronic wiring. I am now unable to use the horn or the end call button.
EDIT: After doing more research recently, I am almost certain that my loss of button function was a result of me breaking my clock spring. The clock spring can be see at 4:49 when he removes the wheel. Is is the big black circle. DO NOT SPIN IT. I assume that while doing this install, I must have become bored and decided to spin that around. As a result, my wires broke and now I can’t use the wheel functions.
Have a pearl white 370 as well and as soon as I saw this white leather/carbon fiber wheel I’m in love with the look
Really well done tutorial. Very impressed. The steering wheel looks great, man.
Btw... ITS A T-30 NOT A T-27. You’ll strip the screw the if you use a T-27. Ask me how I know lmao
Yep, T-30 and it needs to be tamper proof (has a little hole in the top). I bought a short arm torx key set but the little piece of metal sticking out in the middle of the bolt prevented me from breaking it loose. Lesson learned. milanmastracci (video url at the end) mentions this specific requirement in his video. Still appreciate all of your content The Carizon!!!! th-cam.com/video/CGjLhYY2Q_Q/w-d-xo.html
@@michaellopez1221live savers 🤞🏼 going to Home Depot to get a t30 security but + t40
HOWD U FIX IT ONE SIDE STRIPPED WHO TF THOUGHT THESE STUPID ASS BOLTS WERE A GOOD IDEA
Awesome video, thank you !
Can you tell me what tablet you installed and how for the radio???? Anyone I talk to say is damn near impossible to do..
Looks dope👌. The stitching is honey comb shaped awesome!🔥
You said that it was spring loaded but when you removed it I didn’t see any springs, please explain, thanks....at 5:24
Looks sick! Cant wait to get one done for my G!
Just ordered from his today as well!
Did you notice any difference in the feel when you drive?
you make it looks easy. now make me wanting one.
just got my nismo Z couple days ago.
thank you for great video, i definitely sub n like this video.
How have the thumb grips held up? I like them but am a little concerned about the longevity of those and the adhesive or whatever is holding them on.
No issue yet but I also typically use the top or bottom of the steering wheel more.
Went on their site and can no longer find the white model:/ so clean man
Nice great video doing this for my nismo 370z
Looks great!! I have a savings acct going to do upgrades like this for my 03' 350z but I have to do mechanical repairs first!!
Thank you so much for the great video. I went and ordered mine and it just arrived and I got it installed and everything looks good but my only problem is now my airbag light flashes. Is that normal? I reopened everything just to check and everything is plugged in and everything is perfect so I don’t know what it could be? Mine is the exact same car
what options did you choose
Are you planning on covering up the aluminum silver area of the gauge cluster?
Thank you for making Great video 👍 !! Definitely SUBSCRIBED !!
I saw this wheel in his page. I really want to get one but I just dont have the money right now lol
Did you get smooth leather or perforated leather?
When you torque the middle main nut back in place, is there a certain amount of pressure or torque needed or do you just tighten it till I can’t can’t be tightened anymore?
30 ft lbs
Where did you get the Bluetooth CarPlay screen for you car??
Excellent Video.👍👍👍👍👍
How long did it take for you to get yours after your order? I just ordered mine and was curious how long the process would take
I think for me it was a month?
Two springs dropped from my steering wheel when I removed the plastic backing , any idea where these two springs belong? Z1 clueless?
Just finished installing a new steering wheel on my Z. They pop into the back of the first metal bracket you took out of the steering wheel. They provide spring tension for the horn. You'll see a black cross on the back of that piece, that's where they pop on to. Probably a little late for you John but hopefully helps others out. 🤪
Hows that white looking? Is there any white thst can so well & be kept clean? Like perforated Italian leather or some other material?
It's heldbup really well, no discoloration so fat. I try to keep my hands clean.
It's probably not italian leather. Something cheaper but I'm not an upholstery expert.
Really? Sweet wanted to do White too match but I've seen some reds even discolor, fade or get dirty without being able to clean off. So that's good to hear you can still keep the White looking Fresh. What material is your white part? Leather?
@@gman2478 keep in mind I often drive with a hand in the 12 or 6 position, I don't handle the leather all the time.
The leather is white! And I keep it in a garage.
I do mostly too unless I'm at the strip or doing some sort of racing. So your saying then it is leather? Well if it does get dirty I'm just hoping it can get clean ha. Like I said I've seen some no matter if it was leather, suede or alcantata that it coule not regain it's original look. Appreciate your time & help tho.
by any chance wat options did you go with for the steering wheel?
because i really like the setup you went with and wanna use that same one tbh
How long did it take to receive the steering wheel after you placed the order?
About a month
Whos wheel is that? it looks amazing
Jalisco carbon fiber, I believe I includes his instagram in the beginning of the video.
can you put the video for oem radio that you have for nissan 370z
Very nice!
I just saw this mod on his page. I’m hoping to make a video like this on my channel soon too! Your videos are awesome man, let’s collab someday :)
Yeah man, Houston's not too far out there. If I find myself down that way I'll have to hit you up
Great simple informative video
Just subscribe!!!
Where could I get one of these? Could I get a link?
DM jalisco, I left his insta at the beginning of the video.
It looks very nice. Is it ‘just’ for the looks or does it feel lighter too?
Just for looks, been trying to get some I candy for the interior. If there is any weight difference it will only be a few ounces, nothing noticeable.
Tx!
How do you have a big screen in the interior
Braniac Tablet kit
@@thecarizon504 do you have a link
Pretty damn cute gloves.
Lol, I got over wearing them.
@@thecarizon504 lol I was just messing with you man. (You still have them handy in the "glove compartment") 😂😂😂
Success after a buggered torx bolt...
Love easy outs, however be warned... Torx bolts on side of column are case hardened and don't drill out very easy.
Suggest Titanium drill bit.
Once side torx bolts are off. It's easy as.
Much obliged for video tutorial.
Well done and thank you.
One issue I do have though.... Does anyone have a torque setting for centre bolt......
30 ft lbs
what did u replace the bad torx bolt with?
@@PoloZ34 high tensile Allen key bolts... Same M - thread... Just went to Bunnings which is our local hardware store.....
@@dainepetrou8011 okay cool ty , found some myself. Had to pickup a piece for the dremel tool ended up hollowing out the safety dot in the middle and than use an ez out 👍🏼 put some 10mm bolt with same thread in there and good as new!
@@PoloZ34 sweet as... I dunno why they just didn't do this in the first place.
Especially if the make the car and sell the car knowing it will be modified by it's owners anyway....
How much cost you?
Talk to Jalisco for prices. I left his insta tag in the video.
sheesh shits dope man
Subbed
저도 핸들 제작 합니다♡
White on the steering wheel is such a terrible idea.
Fucking torx key bolts I dispise.
Who the fuck invented tork key bolts.
Honest to god.
Auto makers do completely stupid arse shit at times
Hey man where can I buy the steering wheel
Who actually drives at 2 and 10. Honestly. I grab the carbon fiber top.