Is there any marking on the body to indicate what the connectors are? I'd like to order the correct replacement without doing a full uninstallation of the old one first if possible, thanks!
You should be able to tell from looking closely at the installed valve. There's usually a couple threads sticking out if it's a threaded unit. And if you don't see threads, you can tell the difference between just straight pipe going into a glued socket, vs a fitting such as a male adapter or female adapter. But there's not the designation printed on the valve beyond just 100-DV or whatever stamped on the top.
What is the small back thumb screw for. I watched the whole video for a description on that. My drip valve won’t stay open more than a minute. I can’t figure out what is going on.
Hello, sorry that info isn't in the video, but it is in another video, Solenoid Valve Features and Options. It's a bleed screw, and it's used to manually open the valve. If your valve wont stay open, it may be an issue of too little flow or too little pressure. Some valves have a lower minimum threshold than others. Or it may just be a defective valve. But first you should check the specs on the valve, then calculate your flow rate and check the pressure.
@@Proirrigationtraining Thanks!! I believe the problem was the Rainbird pressure regulator that was threaded to my valve. After playing with it some more it blew the little white plugs out the side of it failing completely. I replaced it and all is working well now. What scares me is the is the 2nd one of these that have failed, of the only 2 I have purchased and installed 1 year ago. I’m in a variable speed Submersible well pump which seems to irrigate the yard at around 28psi. Thanks for the response!!
@@rimrockelectric1926 I've never actually used the Rain Bird version of the pressure regulator. That's a shame about 2 failures, but glad you got it sorted out!
Thanks alot it is very beneficial, I will do it my self 😅
Great, good luck with it!
Properly seating the diaphragm as you described stopped the water leaking from my valve... thank you very much!
Hi John, glad you got it sorted out! thanks for watching
Is there any marking on the body to indicate what the connectors are? I'd like to order the correct replacement without doing a full uninstallation of the old one first if possible, thanks!
You should be able to tell from looking closely at the installed valve. There's usually a couple threads sticking out if it's a threaded unit. And if you don't see threads, you can tell the difference between just straight pipe going into a glued socket, vs a fitting such as a male adapter or female adapter. But there's not the designation printed on the valve beyond just 100-DV or whatever stamped on the top.
What is the small back thumb screw for. I watched the whole video for a description on that. My drip valve won’t stay open more than a minute. I can’t figure out what is going on.
Hello, sorry that info isn't in the video, but it is in another video, Solenoid Valve Features and Options. It's a bleed screw, and it's used to manually open the valve. If your valve wont stay open, it may be an issue of too little flow or too little pressure. Some valves have a lower minimum threshold than others. Or it may just be a defective valve. But first you should check the specs on the valve, then calculate your flow rate and check the pressure.
@@Proirrigationtraining Thanks!! I believe the problem was the Rainbird pressure regulator that was threaded to my valve. After playing with it some more it blew the little white plugs out the side of it failing completely. I replaced it and all is working well now. What scares me is the is the 2nd one of these that have failed, of the only 2 I have purchased and installed 1 year ago.
I’m in a variable speed Submersible well pump which seems to irrigate the yard at around 28psi.
Thanks for the response!!
@@rimrockelectric1926 I've never actually used the Rain Bird version of the pressure regulator. That's a shame about 2 failures, but glad you got it sorted out!